PROG=/usr/bin/mini_snmpd
NAME=mini_snmpd
+global_respawn_threshold=
+global_respawn_timeout=
+global_respawn_retry=
+
_log() {
- logger -p daemon.info -t mini_snmpd "$@"
+ logger -p daemon.info -t mini_snmpd "$@"
}
_err() {
- logger -p daemon.err -t mini_snmpd "$@"
+ logger -p daemon.err -t mini_snmpd "$@"
}
-# mini_snmpd 1.3+ now starts later in the game. Expects filesystems monitored to be already mounted, or wont pass args to mini_snmpd
+# mini_snmpd 1.3+ now starts later in the game. Expects filesystems monitored to be already mounted, or wont pass args to mini_snmpd
# and at least configuration entry for network physical interface defined in /etc/config/network
# It handles network interfaces not yet present (e.g. ppp) but will statfs() the root/wrong filesystem if device not mounted
# Tip: complex scripts run faster without in openwrt if you stop busybox forking and searching for applets. Faster bootups
# CONFIG_BUSYBOX_CONFIG_FEATURE_SH_NOFORK
-# CONFIG_BUSYBOX_CONFIG_FEATURE_PREFER_APPLETS
-# BUSYBOX_CONFIG_ASH_OPTIMIZE_FOR_SIZE [=n]
+# CONFIG_BUSYBOX_CONFIG_FEATURE_PREFER_APPLETS
+# BUSYBOX_CONFIG_ASH_OPTIMIZE_FOR_SIZE [=n]
# CONFIG_BUSYBOX_CONFIG_ASH_CMDCMD
mini_snmpd_validation="enabled:bool:0 \
append_disk() {
local disk="$1" disk_count
[ -z $disk_count ] && disk_count=0
- if grep -qF "$disk" /proc/mounts ; then
+ if grep -qF "$disk" /proc/mounts; then
# check the fileystem is mountpoint, and directory search permissions available for statfs()
# presence as a directory -d test done is already done by uci_validate_section()
[ -x "$disk" ] || {
_err "$cfg: mountpoint $disk for snmp monitoring EACCES error. Check permissions, ignoring"
return 1
}
- if [ $disk_count -lt 4 ] ; then
+ if [ $disk_count -lt 4 ]; then
append disks_arg "$disk" ','
disk_count=$((disk_count++))
else
[ -z $netdev_count ] && netdev_count=0
# for the purposes of snmp monitoring it doesn't need to be up, it just needs to exist in /proc/net/dev
network_get_device netdev "$name"
- if [ -n "$netdev" ] && grep -qF "$netdev" /proc/net/dev ]; then
+ if [ -n "$netdev" ] && grep -qF "$netdev" /proc/net/dev ]; then
[ $netdev_count -ge 4 ] && {
_err "$cfg: too many network interfaces configured, ignoring $name"
return
}
- netdev_count=$((netdev_count++))
- if [ -n "$interfaces_arg" ]; then
+ netdev_count=$((netdev_count++))
+ if [ -n "$interfaces_arg" ]; then
append interfaces_arg "$netdev" ','
- else
+ else
append interfaces_arg "$netdev"
fi
else
config_get listen_interface "$cfg" listen_interface
# If the interface is up & instance is running we'll watch at the instance level and only restart that instance if it's bound interface changes
# Regardless of ubus knowing about an interface (in the case it's not yet configured)
- [ -n "$listen_interface" ] && trigger_interfaces="${listen_interface} ${trigger_interfaces} "
+ [ -n "$listen_interface" ] && trigger_interfaces="$listen_interface $trigger_interfaces"
# Restart daemon if one of monitored interfaces changes
config_get reload_interfaces "$cfg" interfaces
-
}
validate_mini_snmpd_section() {
# validate a mini_snmpd instance in uci config file mini_snmpd
# http://luci.subsignal.org/trac/wiki/Documentation/Datatypes ubox/validate/validate.c
- uci_validate_section mini_snmpd mini_snmpd "${1}" $mini_snmpd_validation
+ uci_load_validate mini_snmpd mini_snmpd "$1" "$2" $mini_snmpd_validation
}
service_triggers() {
- config_load 'mini_snmpd'
- procd_open_trigger
- procd_add_config_trigger "config.change" "mini_snmpd" /etc/init.d/mini_snmpd reload
- config_foreach watch_interfaces 'mini_snmpd'
+ config_load 'mini_snmpd'
+ procd_open_trigger
+ procd_add_config_trigger "config.change" "mini_snmpd" /etc/init.d/mini_snmpd reload
+ config_foreach watch_interfaces 'mini_snmpd'
# this only watches interfaces for which there is no running instance due to interface down / not in ubus
# hence start not reload, this trigger will not affect running instances as another start will not change their procd command arguments
# or stop the already running process
- [ -n "$trigger_interfaces" ] & {
- for n in $trigger_interfaces ; do
+ [ -n "$trigger_interfaces" ] && {
+ for n in $trigger_interfaces; do
procd_add_interface_trigger "interface.*" $n /etc/init.d/mini_snmpd start
- done
- }
+ done
+ }
[ -n "$reload_interfaces" ] && {
for n in $reload_interfaces; do
procd_add_reload_interface_trigger $n
done
}
- procd_close_trigger
+ procd_close_trigger
procd_add_validation validate_mini_snmpd_section
}
start_instance() {
local cfg validation_failed validation_err disks_arg interfaces_arg
- cfg="$1"
- #uci_validate_section should unset undefined variables from other instances
- #however defining uci variables as local will scope them to this instance
- #"local variables are also visible to functions called by the parent function" so it's good practice
- local enabled ipv6 debug auth community contact location listen_interface \
- udp_port tcp_port vendor_oid mib_timeout
- local disks="" interfaces=""
- validate_mini_snmpd_section "$cfg" 2>/dev/null || validation_failed=1
- [ "$enabled" == 1 ] || {
- _log "instance:$cfg disabled not starting"
+ cfg="$1"
+ [ "$2" = 0 ] || validation_failed=1
+ [ "$enabled" == 1 ] || {
+ _log "instance:$cfg disabled not starting"
return 1
}
-
+
local listen_interface_json listen_interface_ip listen_interface_device listen_interface_up
[ -n "$listen_interface" ] && {
if [ "$ipv6" = 1 ]; then
network_get_physdev listen_interface_device "$listen_interface"
}
- [ $validation_failed ] && {
+ [ $validation_failed ] && {
_err "validation of $NAME configuration for $cfg instance failed, all tests should be within constraints"
_err "please edit the configuration values below using [l]uci "
validation_err=`/sbin/validate_data mini_snmpd mini_snmpd "$cfg" $mini_snmpd_validation 2>&1 | sed '/with\ false$/!d;s/validates\ as\ /needs\ to\ be\ /;s/with\ false//' `
- _err "${validation_err}"
+ _err "$validation_err"
return 1
}
config_list_foreach "$cfg" 'disks' append_disk
_err "$cfg: you haven't sucessfully configured any mountpoints or disks for this instance, not starting"
return 1
}
-
+
+ [ -z "$respawn_threshold$respawn_timeout$respawn_retry" ] && {
+ respawn_threshold=$global_respawn_threshold
+ respawn_timeout=$global_respawn_timeout
+ respawn_retry=$global_respawn_retry
+ }
+ [ -z "$global_respawn_threshold$global_respawn_timeout$global_respawn_retry" ] && {
+ global_respawn_threshold=$respawn_threshold
+ global_respawn_timeout=$respawn_timeout
+ global_respawn_retry=$respawn_retry
+ }
+
procd_open_instance
procd_set_param command "$PROG" -n
- procd_set_param stdout "1"
+ procd_set_param stdout "1"
procd_set_param stderr "1"
# don't the like default respawn values? you can override through uci.
- # vars left as global so you only need to do it in the first mini_snmpd instance
+ # vars saved as global so you only need to do it in the first mini_snmpd instance
procd_set_param respawn ${respawn_threshold:-3600} ${respawn_timeout:-10} ${respawn_retry:-1}
# this monitors ubus changes
[ -n "$listen_interface" ] && {
#procd_open_trigger
- #procd_add_interface_trigger "interface.*" $listen_interface /etc/init.d/mini_snmpd reload
+ #procd_add_interface_trigger "interface.*" $listen_interface /etc/init.d/mini_snmpd reload
#procd_close_trigger
procd_add_reload_interface_trigger $listen_interface #or use shorthand of above
}
# this re-starts the daemon if a properly configured network interface is changed whilst it is already running
- # igmpproxy has this as well as "procd_set_param netdev"
-
- append_arg "-c" "$community"
- append_arg "-L" "${location}"
- append_arg "-C" "${contact}"
- append_arg "-p" $udp_port
- append_arg "-P" $tcp_port
- append_arg "-V" "${vendor_oid}"
- append_arg "-t" $mib_timeout
-
- [ "$ipv6" = 1 ] && procd_append_param command "-6"
+ # igmpproxy has this as well as "procd_set_param netdev"
+
+ append_arg "-c" "$community"
+ append_arg "-L" "$location"
+ append_arg "-C" "$contact"
+ append_arg "-p" $udp_port
+ append_arg "-P" $tcp_port
+ append_arg "-V" "$vendor_oid"
+ append_arg "-t" $mib_timeout
+
+ [ "$ipv6" = 1 ] && procd_append_param command "-6"
[ "$debug" = 1 ] && procd_append_param command "-v"
- # uci_validate_section() aka /sbin/validate_data can only cast default values not defined in /etc/config/* to string
+ # uci_validate_section() aka /sbin/validate_data can only cast default values not defined in /etc/config/* to string
# e.g. ="1" however it sets bools defined in /etc/config/* to =1 / =0
[ "$auth" = 1 -o "$auth" = "1" ] && procd_append_param command "-a"
[ -n "$disks_arg" ] && procd_append_param command "-d" "$disks_arg"
. /lib/functions/network.sh
config_load 'mini_snmpd'
- config_foreach start_instance 'mini_snmpd'
+ config_foreach validate_mini_snmpd_section 'mini_snmpd' start_instance
}
-
projects / feed / packages.git / blobdiff