--- /dev/null
+
+# The options available here are an adaptation of the settings used in nodogsplash.conf.
+# See https://github.com/nodogsplash/nodogsplash/blob/master/resources/nodogsplash.conf
+
+config nodogsplash
+ # Set to 0 to disable nodogsplash
+ option enabled 1
+
+ # Set to 0 to disable hook that makes nodogsplash restart when the firewall restarts.
+ # This hook is needed as a restart of Firewall overwrites nodogsplash iptables entries.
+ option fwhook_enabled '1'
+
+ # Serve the file splash.html from this directory
+ option webroot '/etc/nodogsplash/htdocs'
+
+ # Use plain configuration file
+ #option config '/etc/nodogsplash/nodogsplash.conf'
+
+ # Use this option to set the device nogogsplash will bind to.
+ # The value may be an interface section in /etc/config/network or a device name such as br-lan.
+ option gatewayinterface 'br-lan'
+
+ option gatewayname 'OpenWrt Nodogsplash'
+ option maxclients '250'
+
+ # Enables debug output (0-7)
+ #option debuglevel '7'
+
+ # Client timeouts in minutes
+ option preauthidletimeout '10'
+ option authidletimeout '120'
+
+ # Your router may have several interfaces, and you
+ # probably want to keep them private from the network/gatewayinterface.
+ # If so, you should block the entire subnets on those interfaces, e.g.:
+ # list authenticated_users 'block to 192.168.0.0/16'
+ # list authenticated_users 'block to 10.0.0.0/8'
+
+ # Typical ports you will probably want to open up.
+ #list authenticated_users 'allow tcp port 22'
+ #list authenticated_users 'allow tcp port 53'
+ #list authenticated_users 'allow udp port 53'
+ #list authenticated_users 'allow tcp port 80'
+ #list authenticated_users 'allow tcp port 443'
+ # Or for happy customers allow all
+ list authenticated_users 'allow all'
+
+ # For preauthenticated users to resolve IP addresses in their
+ # initial request not using the router itself as a DNS server,
+ # Leave commented to help prevent DNS tunnelling
+ #list preauthenticated_users 'allow tcp port 53'
+ #list preauthenticated_users 'allow udp port 53'
+
+ # Allow ports for SSH/Telnet/DNS/DHCP/HTTP/HTTPS
+ list users_to_router 'allow tcp port 22'
+ list users_to_router 'allow tcp port 23'
+ list users_to_router 'allow tcp port 53'
+ list users_to_router 'allow udp port 53'
+ list users_to_router 'allow udp port 67'
+ list users_to_router 'allow tcp port 80'
+
+ # MAC addresses that are / are not allowed to access the splash page
+ # Value is either 'allow' or 'block'. The allowedmac or blockedmac list is used.
+ #option macmechanism 'allow'
+ #list allowedmac '00:00:C0:01:D0:0D'
+ #list allowedmac '00:00:C0:01:D0:1D'
+ #list blockedmac '00:00:C0:01:D0:2D'
+
+ # MAC addresses that do not need to authenticate
+ #list trustedmac '00:00:C0:01:D0:1D'
+
+ # Set FW_MARK for compatibilty with other OpenWrt Packages eg mwan3, sqm etc.
+ list fw_mark_authenticated '30000'
+ list fw_mark_trusted '20000'
+ list fw_mark_blocked '10000'