+++ /dev/null
-#
-# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
-#
-
-menu "Networking Utilities"
-
-config BUSYBOX_CONFIG_FEATURE_IPV6
- bool "Enable IPv6 support"
- default y
- help
- Enable IPv6 support to busybox. This makes applets that talk IP
- able to work with IPv6.
-
-config BUSYBOX_CONFIG_ARPING
- bool "arping"
- default y
- help
- Ping hosts by ARP packets
-
-config BUSYBOX_CONFIG_DNSD
- bool "dnsd"
- default n
- help
- Small and static DNS server deamon.
-
-config BUSYBOX_CONFIG_ETHER_WAKE
- bool "ether-wake"
- default n
- help
- Send a magic packet to wake up sleeping machines.
-
-config BUSYBOX_CONFIG_FAKEIDENTD
- bool "fakeidentd"
- default n
- help
- fakeidentd listens to the ident port and returns a set fake
- value whatever it gets.
-
-config BUSYBOX_CONFIG_FTPGET
- bool "ftpget"
- default n
- help
- Retrieve a remote file via FTP.
-
-config BUSYBOX_CONFIG_FTPPUT
- bool "ftpput"
- default n
- help
- Store a remote file via FTP.
-
-config BUSYBOX_CONFIG_HOSTNAME
- bool "hostname"
- default n
- help
- Show or set the system's host name
-
-config BUSYBOX_CONFIG_HTTPD
- bool "httpd"
- default y
- help
- Serve web pages via an HTTP server.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY
- bool " Support using httpd only from inetd"
- default n
- depends on BUSYBOX_CONFIG_HTTPD
- help
- This option disables uid and port options for the httpd applet
- but requires inetd server daemon.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
- bool " Enable Basic http Authentication"
- default y
- depends on BUSYBOX_CONFIG_HTTPD
- help
- Utilizes password settings from /etc/httpd.conf for basic
- authentication on a per url basis.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5
- bool " Support MD5 crypted passwords for http Authentication"
- default y
- depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
- help
- Enables basic per url authentication from /etc/httpd.conf
- using md5 passwords.
-
-if !CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY
-config BUSYBOX_CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP
- bool " Support reloading the global config file using hup signal"
- default y
- depends on BUSYBOX_CONFIG_HTTPD
- help
- This option enables processing of SIGHUP to reload cached
- configuration settings.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID
- bool " Enable support -u <user> option"
- default n
- depends on BUSYBOX_CONFIG_HTTPD
- help
- This option allows the server to run as a specific user
- rather than defaulting to the user that starts the server.
- Use of this option requires special privileges to change to a
- different user.
-endif
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES
- bool " Support loading additional MIME types at run-time"
- default y
- depends on BUSYBOX_CONFIG_HTTPD
- help
- This option enables support for additional MIME types at
- run-time to be specified in the configuration file.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
- bool " Support Common Gateway Interface (CGI)"
- default y
- depends on BUSYBOX_CONFIG_HTTPD
- help
- This option allows scripts and executables to be invoked
- when specific urls are requested.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
- bool " Enable support for running scripts through an interpreter"
- default n
- depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
- help
- This option enables support for running scripts through an
- interpreter. Turn this on, if you want PHP scripts to work
- properly. You need to supply an addition line in your httpd
- config file:
- *.php:/path/to/your/php
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
- bool " Support the REMOTE_PORT environment variable for CGI"
- default y
- depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
- help
- Use of this option can assist scripts in generating
- references that contain a unique port number.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR
- bool " Enable the -e option for shell script CGI simplification."
- default y
- depends on BUSYBOX_CONFIG_HTTPD
- help
- After set, this option allows html encoding arbitrary
- strings for display of the browser. Output goes to stdout.
- For example, httpd -e "<Hello World>" as
- "<Hello World>".
-
-config BUSYBOX_CONFIG_IFCONFIG
- bool "ifconfig"
- default y
- help
- Ifconfig is used to configure the kernel-resident network interfaces.
-
-config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS
- bool " Enable status reporting output (+7k)"
- default y
- depends on BUSYBOX_CONFIG_IFCONFIG
- help
- If ifconfig is called with no arguments it will display the status
- of the currently active interfaces.
-
-config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP
- bool " Enable slip-specific options \"keepalive\" and \"outfill\""
- default n
- depends on BUSYBOX_CONFIG_IFCONFIG
- help
- Allow "keepalive" and "outfill" support for SLIP. If you're not
- planning on using serial lines, leave this unchecked.
-
-config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
- bool " Enable options \"mem_start\", \"io_addr\", and \"irq\""
- default n
- depends on BUSYBOX_CONFIG_IFCONFIG
- help
- Allow the start address for shared memory, start address for I/O,
- and/or the interrupt line used by the specified device.
-
-config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW
- bool " Enable option \"hw\" (ether only)"
- default y
- depends on BUSYBOX_CONFIG_IFCONFIG
- help
- Set the hardware address of this interface, if the device driver
- supports this operation. Currently, we only support the 'ether'
- class.
-
-config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS
- bool " Set the broadcast automatically"
- default y
- depends on BUSYBOX_CONFIG_IFCONFIG
- help
- Setting this will make ifconfig attempt to find the broadcast
- automatically if the value '+' is used.
-
-config BUSYBOX_CONFIG_IFUPDOWN
- bool "ifupdown"
- default n
- select BUSYBOX_CONFIG_RUN_PARTS
- help
- Activate or deactivate the specified interfaces. This applet makes
- use of either "ifconfig" and "route" or the "ip" command to actually
- configure network interfaces. Therefore, you will probably also want
- to enable either BUSYBOX_CONFIG_IFCONFIG and BUSYBOX_CONFIG_ROUTE, or enable
- BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP and the various BUSYBOX_CONFIG_IP options. Of
- course you could use non-busybox versions of these programs, so
- against my better judgement (since this will surely result in plenty
- of support questions on the mailing list), I do not force you to
- enable these additional options. It is up to you to supply either
- "ifconfig" and "route" or the "ip" command, either via busybox or via
- standalone utilities.
-
-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
- bool " Use ip applet"
- default n
- depends on BUSYBOX_CONFIG_IFUPDOWN
- help
- Use the iproute "ip" command to implement "ifup" and "ifdown", rather
- than the default of using the older 'ifconfig' and 'route' utilities.
-
-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN
- bool " Use busybox ip applet"
- default n
- depends on BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
- select BUSYBOX_CONFIG_IP
- select BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
- select BUSYBOX_CONFIG_FEATURE_IP_LINK
- select BUSYBOX_CONFIG_FEATURE_IP_ROUTE
- help
- Use the busybox iproute "ip" applet to implement "ifupdown".
-
- If leave this disabled, you must install the full-blown iproute2
- utility or the "ifup" and "ifdown" applets will not work.
-
-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN
- bool " Use busybox ifconfig and route applets"
- default n
- depends on BUSYBOX_CONFIG_IFUPDOWN && !CONFIG_FEATURE_IFUPDOWN_IP
- select BUSYBOX_CONFIG_IFCONFIG
- select BUSYBOX_CONFIG_ROUTE
- help
- Use the busybox iproute "ifconfig" and "route" applets to
- implement the "ifup" and "ifdown" utilities.
-
- If leave this disabled, you must install the full-blown ifconfig
- and route utilities, or the "ifup" and "ifdown" applets will not
- work.
-
-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4
- bool " Enable support for IPv4"
- default n
- depends on BUSYBOX_CONFIG_IFUPDOWN
- help
- If you want busybox to talk IPv4, leave this on.
-
-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6
- bool " Enable support for IPv6"
- default n
- depends on BUSYBOX_CONFIG_IFUPDOWN
- help
- If you need support for IPv6, turn this option on.
-
-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPX
- bool " Enable support for IPX"
- default n
- depends on BUSYBOX_CONFIG_IFUPDOWN
- help
- If this option is selected you can use busybox to work with IPX
- networks.
-
-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING
- bool " Enable mapping support"
- default n
- depends on BUSYBOX_CONFIG_IFUPDOWN
- help
- This enables support for the "mapping" stanza, unless you have
- a weird network setup you don't need it.
-
-config BUSYBOX_CONFIG_INETD
- bool "inetd"
- default n
- help
- Internet superserver daemon
-
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_ECHO
- bool " Support echo service"
- default n
- depends on BUSYBOX_CONFIG_INETD
- help
- Echo received data internal inetd service
-
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_DISCARD
- bool " Support discard service"
- default n
- depends on BUSYBOX_CONFIG_INETD
- help
- Internet /dev/null internal inetd service
-
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_TIME
- bool " Support time service"
- default n
- depends on BUSYBOX_CONFIG_INETD
- help
- Return 32 bit time since 1900 internal inetd service
-
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_DAYTIME
- bool " Support daytime service"
- default n
- depends on BUSYBOX_CONFIG_INETD
- help
- Return human-readable time internal inetd service
-
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_CHARGEN
- bool " Support chargen service"
- default n
- depends on BUSYBOX_CONFIG_INETD
- help
- Familiar character generator internal inetd service
-
-config BUSYBOX_CONFIG_FEATURE_INETD_RPC
- bool " Support RPC services"
- default n
- depends on BUSYBOX_CONFIG_INETD
- help
- Suuport Sun-RPC based services
-
-
-config BUSYBOX_CONFIG_IP
- bool "ip"
- default n
- help
- The "ip" applet is a TCP/IP interface configuration and routing
- utility. You generally don't need "ip" to use busybox with
- TCP/IP.
-
-if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPADDR
- config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
- default n
- comment " address (forced enabled for ipaddr)"
-endif
-if ! (CONFIG_IP && BUSYBOX_CONFIG_IPADDR)
- config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
- bool " address"
- default n
- depends on BUSYBOX_CONFIG_IP
- help
- Address manipulation support for the "ip" applet.
-endif
-
-if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPLINK
- config BUSYBOX_CONFIG_FEATURE_IP_LINK
- default n
- comment " link (forced enabled for iplink)"
-endif
-if !(CONFIG_IP && BUSYBOX_CONFIG_IPLINK)
- config BUSYBOX_CONFIG_FEATURE_IP_LINK
- bool " link"
- default n
- depends on BUSYBOX_CONFIG_IP
- help
- Configure network devices with "ip".
-endif
-
-if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPROUTE
- config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
- default n
- comment " route (forced enabled for iproute)"
-endif
-if !(CONFIG_IP && BUSYBOX_CONFIG_IPROUTE)
- config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
- bool " route"
- default n
- depends on BUSYBOX_CONFIG_IP
- help
- Add support for routing table management to "ip".
-endif
-
-if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPTUNNEL
- config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
- default n
- comment " tunnel (forced enabled for iptunnel)"
-endif
-if !(CONFIG_IP && BUSYBOX_CONFIG_IPTUNNEL)
- config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
- bool " tunnel"
- default n
- depends on BUSYBOX_CONFIG_IP
- help
- Add support for tunneling commands to "ip".
-endif
-
-config BUSYBOX_CONFIG_IPCALC
- bool "ipcalc"
- default n
- help
- ipcalc takes an IP address and netmask and calculates the
- resulting broadcast, network, and host range.
-
-config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY
- bool " Fancy IPCALC, more options, adds 1 kbyte"
- default n
- depends on BUSYBOX_CONFIG_IPCALC
- help
- Adds the options hostname, prefix and silent to the output of "ipcalc".
-
-config BUSYBOX_CONFIG_IPADDR
- bool "ipaddr"
- default n
- help
- Equivalent to selecting address support to "ip", above.
-
-config BUSYBOX_CONFIG_IPLINK
- bool "iplink"
- default n
- help
- Equivalent to selecting link support to "ip", above.
-
-config BUSYBOX_CONFIG_IPROUTE
- bool "iproute"
- default n
- help
- Equivalent to selecting route support to "ip", above.
-
-config BUSYBOX_CONFIG_IPTUNNEL
- bool "iptunnel"
- default n
- help
- Equivalent to selecting tunnel support to "ip", above.
-
-config BUSYBOX_CONFIG_NAMEIF
- bool "nameif"
- default n
- help
- nameif is used to rename network interface by its MAC address.
- Renamed interfaces MUST be in the down state.
- It is possible to use a file (default: /etc/mactab)
- with list of new interface names and MACs.
- Maximum interface name length: IF_NAMESIZE = 16
- File fields are separated by space or tab.
- File format:
- # Comment
- new_interface_name XX:XX:XX:XX:XX:XX
-
-config BUSYBOX_CONFIG_NC
- bool "nc"
- default y
- help
- A simple Unix utility which reads and writes data across network
- connections.
-
-config BUSYBOX_CONFIG_NETMSG
- bool "netmsg"
- default y
- help
- simple program for sending udp broadcast messages
-
-config BUSYBOX_CONFIG_NC_GAPING_SECURITY_HOLE
- bool "gaping security hole"
- default n
- depends on BUSYBOX_CONFIG_NC
- help
- Add support for executing a program after making or receiving a
- successful connection (-e option).
-
-config BUSYBOX_CONFIG_NETSTAT
- bool "netstat"
- default y
- help
- netstat prints information about the Linux networking subsystem.
-
-config BUSYBOX_CONFIG_NSLOOKUP
- bool "nslookup"
- default y
- help
- nslookup is a tool to query Internet name servers.
-
-config BUSYBOX_CONFIG_PING
- bool "ping"
- default y
- help
- ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
- elicit an ICMP ECHO_RESPONSE from a host or gateway.
-
-config BUSYBOX_CONFIG_FEATURE_FANCY_PING
- bool " Enable fancy ping output"
- default y
- depends on BUSYBOX_CONFIG_PING
- help
- Make the output from the ping applet include statistics, and at the
- same time provide full support for ICMP packets.
-
-config BUSYBOX_CONFIG_PING6
- bool "ping6"
- default y
- depends on BUSYBOX_CONFIG_FEATURE_IPV6
- help
- This will give you a ping that can talk IPv6.
-
-config BUSYBOX_CONFIG_FEATURE_FANCY_PING6
- bool " Enable fancy ping6 output"
- default y
- depends on BUSYBOX_CONFIG_PING6
- help
- Make the output from the ping6 applet include statistics, and at the
- same time provide full support for ICMP packets.
-
-config BUSYBOX_CONFIG_ROUTE
- bool "route"
- default y
- help
- Route displays or manipulates the kernel's IP routing tables.
-
-config BUSYBOX_CONFIG_TELNET
- bool "telnet"
- default y
- help
- Telnet is an interface to the TELNET protocol, but is also commonly
- used to test other simple protocols.
-
-config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE
- bool " Pass TERM type to remote host"
- default y
- depends on BUSYBOX_CONFIG_TELNET
- help
- Setting this option will forward the TERM environment variable to the
- remote host you are connecting to. This is useful to make sure that
- things like ANSI colors and other control sequences behave.
-
-config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN
- bool " Pass USER type to remote host"
- default n
- depends on BUSYBOX_CONFIG_TELNET
- help
- Setting this option will forward the USER environment variable to the
- remote host you are connecting to. This is useful when you need to
- log into a machine without telling the username (autologin). This
- option enables `-a' and `-l USER' arguments.
-
-config BUSYBOX_CONFIG_TELNETD
- bool "telnetd"
- default y
- help
- A daemon for the TELNET protocol, allowing you to log onto the host
- running the daemon. Please keep in mind that the TELNET protocol
- sends passwords in plain text. If you can't afford the space for an
- SSH daemon and you trust your network, you may say 'y' here. As a
- more secure alternative, you should seriously consider installing the
- very small Dropbear SSH daemon instead:
- http://matt.ucc.asn.au/dropbear/dropbear.html
-
- Note that for busybox telnetd to work you need several things:
- First of all, your kernel needs:
- BUSYBOX_CONFIG_UNIX98_PTYS=y
- BUSYBOX_CONFIG_DEVPTS_FS=y
-
- Next, you need a /dev/pts directory on your root filesystem:
-
- $ ls -ld /dev/pts
- drwxr-xr-x 2 root root 0 Sep 23 13:21 /dev/pts/
-
- Next you need the pseudo terminal master multiplexer /dev/ptmx:
-
- $ ls -la /dev/ptmx
- crw-rw-rw- 1 root tty 5, 2 Sep 23 13:55 /dev/ptmx
-
- Any /dev/ttyp[0-9]* files you may have can be removed.
- Next, you need to mount the devpts filesystem on /dev/pts using:
-
- mount -t devpts devpts /dev/pts
-
- You need to be sure that Busybox has BUSYBOX_CONFIG_LOGIN and
- BUSYBOX_CONFIG_FEATURE_SUID enabled. And finally, you should make
- certain that Busybox has been installed setuid root:
-
- chown root.root /bin/busybox
- chmod 4755 /bin/busybox
-
- with all that done, telnetd _should_ work....
-
-
-config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD
- bool " Support call from inetd only"
- default n
- depends on BUSYBOX_CONFIG_TELNETD
- help
- Selecting this will make telnetd only callable from inetd,
- removing the standalone support.
-
-config BUSYBOX_CONFIG_TFTP
- bool "tftp"
- default n
- help
- This enables the Trivial File Transfer Protocol client program. TFTP
- is usually used for simple, small transfers such as a root image
- for a network-enabled bootloader.
-
-config BUSYBOX_CONFIG_FEATURE_TFTP_GET
- bool " Enable \"get\" command"
- default n
- depends on BUSYBOX_CONFIG_TFTP
- help
- Add support for the GET command within the TFTP client. This allows
- a client to retrieve a file from a TFTP server.
-
-config BUSYBOX_CONFIG_FEATURE_TFTP_PUT
- bool " Enable \"put\" command"
- default n
- depends on BUSYBOX_CONFIG_TFTP
- help
- Add support for the PUT command within the TFTP client. This allows
- a client to transfer a file to a TFTP server.
-
-config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
- bool " Enable \"blocksize\" command"
- default n
- depends on BUSYBOX_CONFIG_TFTP
- help
- Allow the client to specify the desired block size for transfers.
-
-config BUSYBOX_CONFIG_FEATURE_TFTP_DEBUG
- bool " Enable debug"
- default n
- depends on BUSYBOX_CONFIG_TFTP
- help
- Enable debug settings for tftp. This is useful if you're running
- into problems with tftp as the protocol doesn't help you much when
- you run into problems.
-
-config BUSYBOX_CONFIG_TRACEROUTE
- bool "traceroute"
- default y
- help
- Utility to trace the route of IP packets
-
-config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE
- bool " Enable verbose output"
- default y
- depends on BUSYBOX_CONFIG_TRACEROUTE
- help
- Add some verbosity to traceroute. This includes amongst other things
- hostnames and ICMP response types.
-
-config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE
- bool " Enable loose source route"
- default n
- depends on BUSYBOX_CONFIG_TRACEROUTE
- help
- Add option to specify a loose source route gateway
- (8 maximum).
-
-config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP
- bool " Use ICMP instead of UDP"
- default n
- depends on BUSYBOX_CONFIG_TRACEROUTE
- help
- Add feature to allow for ICMP ECHO instead of UDP datagrams.
-
-
-config BUSYBOX_CONFIG_VCONFIG
- bool "vconfig"
- default y
- help
- Creates, removes, and configures VLAN interfaces
-
-config BUSYBOX_CONFIG_WGET
- bool "wget"
- default y
- help
- wget is a utility for non-interactive download of files from HTTP,
- HTTPS, and FTP servers.
-
-config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR
- bool " Enable a nifty process meter (+2k)"
- default y
- depends on BUSYBOX_CONFIG_WGET
- help
- Enable the transfer progress bar for wget transfers.
-
-config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION
- bool " Enable HTTP authentication"
- default y
- depends on BUSYBOX_CONFIG_WGET
- help
- Support authenticated HTTP transfers.
-
-config BUSYBOX_CONFIG_FEATURE_WGET_IP6_LITERAL
- bool " Enable IPv6 literal addresses"
- default y
- depends on BUSYBOX_CONFIG_WGET
- help
- Support IPv6 address literal notation in URLs.
-
-source package/busybox/config/networking/udhcp/Config.in
-
-config BUSYBOX_CONFIG_ZCIP
- bool "zcip"
- default n
- help
- ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
- It's a daemon that allocates and defends a dynamically assigned
- address on the 169.254/16 network, requiring no system administrator.
-
- See http://www.zeroconf.org for further details, and "zcip.script"
- in the busybox examples.
-
-endmenu
-
projects / openwrt / svn-archive / archive.git / blobdiff