+++ /dev/null
-diff -rNu linux-2.4.29.old/drivers/Makefile linux-2.4.29/drivers/Makefile
---- linux-2.4.29.old/drivers/Makefile 2005-03-22 14:47:41.000000000 +0100
-+++ linux-2.4.29/drivers/Makefile 2005-03-22 15:15:20.012957872 +0100
-@@ -38,7 +38,7 @@
- subdir-$(CONFIG_MD) += md
- subdir-$(CONFIG_IEEE1394) += ieee1394
- subdir-$(CONFIG_PNP) += pnp
--subdir-$(CONFIG_ISDN_BOOL) += isdn
-+subdir-$(CONFIG_ISDN) += isdn
- subdir-$(CONFIG_ATM) += atm
- subdir-$(CONFIG_FC4) += fc4
-
-diff -rNu linux-2.4.29.old/drivers/isdn/hisax/hfc_usb.c linux-2.4.29/drivers/isdn/hisax/hfc_usb.c
---- linux-2.4.29.old/drivers/isdn/hisax/hfc_usb.c 2005-03-22 15:13:58.233390256 +0100
-+++ linux-2.4.29/drivers/isdn/hisax/hfc_usb.c 2005-03-22 15:14:57.475384104 +0100
-@@ -1,13 +1,11 @@
--/* $Id: hfc_usb.c,v 2.3 2001/07/06 21:30:11 werner Exp $
-+/*
-+ * hfc_usb.c
- *
-+ * modular HiSax ISDN driver for Colognechip HFC-USB chip
- *
-- *
-- * Author (C) 2001 Werner Cornelius (werner@isdn-development.de)
-- * modular driver for Colognechip HFC-USB chip
-- * as plugin for HiSax isdn driver
-- * type approval valid for HFC-S USB based TAs
-- *
-- * Copyright 2001 by Werner Cornelius (werner@isdn-development.de)
-+ * Authors : Peter Sprenger (sprenger@moving-byters.de)
-+ * Martin Bachem (info@colognechip.com)
-+ * based on the first hfc_usb driver of Werner Cornelius (werner@isdn-development.de)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
-@@ -23,70 +21,90 @@
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
-- */
-+ * 2005_Mar_16 grsch
-+ * ported 2.6.8 hfc_usb.c to 2.4.20 format
-+ * Gregor Schaffrath <gschaff@ran-dom.org>
-+*/
-+
-
- #include <linux/types.h>
- #include <linux/stddef.h>
- #include <linux/timer.h>
- #include <linux/config.h>
--#include <linux/isdn_compat.h>
- #include <linux/init.h>
- #include "hisax.h"
- #include <linux/module.h>
- #include <linux/kernel_stat.h>
--#include <linux/tqueue.h>
- #include <linux/usb.h>
- #include <linux/kernel.h>
- #include <linux/smp_lock.h>
- #include <linux/sched.h>
-+#include "hisax_if.h"
- #include "hisax_loadable.h"
-
-+static const char *hfcusb_revision = "4.0";
-+
-+/*
-+ to enable much mire debug messages in this driver, define
-+ VERBOSE_USB_DEBUG and VERBOSE_ISDN_DEBUG
-+ below
-+*/
-+
-+#define VERBOSE_USB_DEBUG
-+#define VERBOSE_ISDN_DEBUG
-+
- #define INCLUDE_INLINE_FUNCS
-
-+#define TRUE 1
-+#define FALSE 0
-+
-+
- /***********/
- /* defines */
- /***********/
--#define HFC_CTRL_TIMEOUT 5 /* 5ms timeout writing/reading regs */
--#define HFC_TIMER_T3 7000 /* timeout for l1 activation timer */
--
--#define HFCUSB_L1_STATECHANGE 0 /* L1 state changed */
--#define HFCUSB_L1_DRX 1 /* D-frame received */
--#define HFCUSB_L1_ERX 2 /* E-frame received */
--#define HFCUSB_L1_DTX 4 /* D-frames completed */
--
--#define MAX_BCH_SIZE 2048 /* allowed B-channel packet size */
--
--#define HFCUSB_RX_THRESHOLD 64 /* threshold for fifo report bit rx */
--#define HFCUSB_TX_THRESHOLD 64 /* threshold for fifo report bit tx */
--
--#define HFCUSB_CHIP_ID 0x16 /* Chip ID register index */
--#define HFCUSB_CIRM 0x00 /* cirm register index */
--#define HFCUSB_USB_SIZE 0x07 /* int length register */
--#define HFCUSB_USB_SIZE_I 0x06 /* iso length register */
--#define HFCUSB_F_CROSS 0x0b /* bit order register */
--#define HFCUSB_CLKDEL 0x37 /* bit delay register */
--#define HFCUSB_CON_HDLC 0xfa /* channel connect register */
-+#define HFC_CTRL_TIMEOUT 20 //(HZ * USB_CTRL_GET_TIMEOUT)
-+/* 5ms timeout writing/reading regs */
-+#define HFC_TIMER_T3 8000 /* timeout for l1 activation timer */
-+#define HFC_TIMER_T4 500 /* time for state change interval */
-+
-+#define HFCUSB_L1_STATECHANGE 0 /* L1 state changed */
-+#define HFCUSB_L1_DRX 1 /* D-frame received */
-+#define HFCUSB_L1_ERX 2 /* E-frame received */
-+#define HFCUSB_L1_DTX 4 /* D-frames completed */
-+
-+#define MAX_BCH_SIZE 2048 /* allowed B-channel packet size */
-+
-+#define HFCUSB_RX_THRESHOLD 64 /* threshold for fifo report bit rx */
-+#define HFCUSB_TX_THRESHOLD 64 /* threshold for fifo report bit tx */
-+
-+#define HFCUSB_CHIP_ID 0x16 /* Chip ID register index */
-+#define HFCUSB_CIRM 0x00 /* cirm register index */
-+#define HFCUSB_USB_SIZE 0x07 /* int length register */
-+#define HFCUSB_USB_SIZE_I 0x06 /* iso length register */
-+#define HFCUSB_F_CROSS 0x0b /* bit order register */
-+#define HFCUSB_CLKDEL 0x37 /* bit delay register */
-+#define HFCUSB_CON_HDLC 0xfa /* channel connect register */
- #define HFCUSB_HDLC_PAR 0xfb
--#define HFCUSB_SCTRL 0x31 /* S-bus control register (tx) */
--#define HFCUSB_SCTRL_E 0x32 /* same for E and special funcs */
--#define HFCUSB_SCTRL_R 0x33 /* S-bus control register (rx) */
--#define HFCUSB_F_THRES 0x0c /* threshold register */
--#define HFCUSB_FIFO 0x0f /* fifo select register */
--#define HFCUSB_F_USAGE 0x1a /* fifo usage register */
-+#define HFCUSB_SCTRL 0x31 /* S-bus control register (tx) */
-+#define HFCUSB_SCTRL_E 0x32 /* same for E and special funcs */
-+#define HFCUSB_SCTRL_R 0x33 /* S-bus control register (rx) */
-+#define HFCUSB_F_THRES 0x0c /* threshold register */
-+#define HFCUSB_FIFO 0x0f /* fifo select register */
-+#define HFCUSB_F_USAGE 0x1a /* fifo usage register */
- #define HFCUSB_MST_MODE0 0x14
- #define HFCUSB_MST_MODE1 0x15
- #define HFCUSB_P_DATA 0x1f
- #define HFCUSB_INC_RES_F 0x0e
- #define HFCUSB_STATES 0x30
-
--#define HFCUSB_CHIPID 0x40 /* ID value of HFC-USB */
-+#define HFCUSB_CHIPID 0x40 /* ID value of HFC-USB */
-
- /******************/
- /* fifo registers */
- /******************/
--#define HFCUSB_NUM_FIFOS 8 /* maximum number of fifos */
--#define HFCUSB_B1_TX 0 /* index for B1 transmit bulk/int */
--#define HFCUSB_B1_RX 1 /* index for B1 receive bulk/int */
-+#define HFCUSB_NUM_FIFOS 8 /* maximum number of fifos */
-+#define HFCUSB_B1_TX 0 /* index for B1 transmit bulk/int */
-+#define HFCUSB_B1_RX 1 /* index for B1 receive bulk/int */
- #define HFCUSB_B2_TX 2
- #define HFCUSB_B2_RX 3
- #define HFCUSB_D_TX 4
-@@ -94,198 +112,162 @@
- #define HFCUSB_PCM_TX 6
- #define HFCUSB_PCM_RX 7
-
--/************/
--/* LED mask */
--/************/
--#define LED_DRIVER 0x1
--#define LED_L1 0x2
--#define LED_BCH 0x4
-+/*
-+* used to switch snd_transfer_mode for different TA modes e.g. the Billion USB TA just
-+* supports ISO out, while the Cologne Chip EVAL TA just supports BULK out
-+*/
-+#define USB_INT 0
-+#define USB_BULK 1
-+#define USB_ISOC 2
-+
-+#define ISOC_PACKETS_D 8
-+#define ISOC_PACKETS_B 8
-+#define ISO_BUFFER_SIZE 128
-+
-+// ISO send definitions
-+#define SINK_MAX 68
-+#define SINK_MIN 48
-+#define SINK_DMIN 12
-+#define SINK_DMAX 18
-+#define BITLINE_INF (-64*8)
-+
-+
-+
-
- /**********/
- /* macros */
- /**********/
--#define Write_hfc(a,b,c) usb_control_msg((a)->dev,(a)->ctrl_out_pipe,0,0x40,(c),(b),0,0,HFC_CTRL_TIMEOUT)
--#define Read_hfc(a,b,c) usb_control_msg((a)->dev,(a)->ctrl_in_pipe,1,0xC0,0,(b),(c),1,HFC_CTRL_TIMEOUT)
--
--#ifdef COMPAT_HAS_USB_IDTAB
--/****************************************/
--/* data defining the devices to be used */
--/****************************************/
--static __devinitdata const struct usb_device_id hfc_usb_idtab[3] = {
-- {USB_DEVICE(0x959, 0x2bd0)}, /* Colognechip ROM */
-- {USB_DEVICE(0x7b0, 0x0006)}, /* USB TA 128 */
-- {} /* end with an all-zeroes entry */
--};
--#endif
-+#define write_usb(a,b,c) usb_control_msg((a)->dev,(a)->ctrl_out_pipe,0,0x40,(c),(b),NULL,0,HFC_CTRL_TIMEOUT)
-+#define read_usb(a,b,c) usb_control_msg((a)->dev,(a)->ctrl_in_pipe,1,0xC0,0,(b),(c),1,HFC_CTRL_TIMEOUT)
-
- /*************************************************/
- /* entry and size of output/input control buffer */
- /*************************************************/
- #define HFC_CTRL_BUFSIZE 32
--typedef struct {
-+typedef struct
-+{
- __u8 hfc_reg; /* register number */
- __u8 reg_val; /* value to be written (or read) */
-+ int action; /* data for action handler */
-+
- } ctrl_buft;
-
-+typedef struct
-+{
-+ int vendor; // vendor id
-+ int prod_id; // product id
-+ char *vend_name; // vendor string
-+ __u8 led_scheme; // led display scheme
-+ __u8 led_invert; // invert led aux port settings
-+ __u8 led_bits[8]; // array of 8 possible LED bitmask settings
-+
-+} vendor_data;
-+
- /***************************************************************/
- /* structure defining input+output fifos (interrupt/bulk mode) */
- /***************************************************************/
--struct hfcusb_data; /* forward definition */
--typedef struct {
-- int fifonum; /* fifo index attached to this structure */
-- __u8 fifo_mask; /* mask for this fifo */
-- int active; /* fifo is currently active */
-+
-+struct usb_fifo; /* forward definition */
-+typedef struct iso_urb_struct
-+{
-+ struct urb *purb;
-+ __u8 buffer[ISO_BUFFER_SIZE]; /* buffer incoming/outgoing data */
-+ struct usb_fifo *owner_fifo; // pointer to owner fifo
-+} iso_urb_struct;
-+
-+
-+struct hfcusb_data; /* forward definition */
-+typedef struct usb_fifo
-+{
-+ int fifonum; /* fifo index attached to this structure */
-+ int active; /* fifo is currently active */
- struct hfcusb_data *hfc; /* pointer to main structure */
-- int pipe; /* address of endpoint */
-- __u8 usb_maxlen; /* maximum length for usb transfer */
-- int max_size; /* maximum size of receive/send packet */
-- int transmode; /* transparent mode selected */
-- int framenum; /* number of frame when last tx completed */
-- int rx_offset; /* offset inside rx buffer */
-- int next_complete; /* complete marker */
-- __u8 *act_ptr; /* pointer to next data */
-- __u8 intervall; /* interrupt interval */
-- struct sk_buff *buff; /* actual used buffer */
-- urb_t urb; /* transfer structure for usb routines */
-- __u8 buffer[128]; /* buffer incoming/outgoing data */
-+ int pipe; /* address of endpoint */
-+ __u8 usb_packet_maxlen; /* maximum length for usb transfer */
-+ unsigned int max_size; /* maximum size of receive/send packet */
-+ __u8 intervall; /* interrupt interval */
-+ struct sk_buff *skbuff; /* actual used buffer */
-+ struct urb *urb; /* transfer structure for usb routines */
-+ __u8 buffer[128]; /* buffer incoming/outgoing data */
-+ int bit_line; /* how much bits are in the fifo? */
-+
-+ volatile __u8 usb_transfer_mode;/* switched between ISO and INT */
-+ iso_urb_struct iso[2]; /* need two urbs to have one always for pending */
-+ struct hisax_if *hif; /* hisax interface */
-+ int delete_flg; /* only delete skbuff once */
-+ int last_urblen; /* remember length of last packet */
-+
- } usb_fifo;
-
-+
- /*********************************************/
- /* structure holding all data for one device */
- /*********************************************/
--typedef struct hfcusb_data {
-- struct hisax_drvreg regd; /* register data and callbacks */
-- struct usb_device *dev; /* our device */
-- int if_used; /* used interface number */
-- int alt_used; /* used alternate config */
-- int ctrl_paksize; /* control pipe packet size */
-+typedef struct hfcusb_data
-+{
-+ // HiSax Interface for loadable Layer1 drivers
-+ struct hisax_d_if d_if; /* see hisax_if.h */
-+ struct hisax_b_if b_if[2]; /* see hisax_if.h */
-+ int protocol;
-+
-+ struct usb_device *dev; /* our device */
-+ int if_used; /* used interface number */
-+ int alt_used; /* used alternate config */
-+ int ctrl_paksize; /* control pipe packet size */
- int ctrl_in_pipe, ctrl_out_pipe; /* handles for control pipe */
-+ int cfg_used; /* configuration index used */
-+ int vend_idx; // vendor found
-+
-+ int b_mode[2]; // B-channel mode
-+
-+ int l1_activated; // layer 1 activated
-+
-+ int packet_size,iso_packet_size;
-
- /* control pipe background handling */
- ctrl_buft ctrl_buff[HFC_CTRL_BUFSIZE]; /* buffer holding queued data */
-- volatile int ctrl_in_idx, ctrl_out_idx, ctrl_cnt; /* input/output pointer + count */
-- urb_t ctrl_urb; /* transfer structure for control channel */
-- devrequest ctrl_write; /* buffer for control write request */
-- devrequest ctrl_read; /* same for read request */
--
-- volatile __u8 dfifo_fill; /* value read from tx d-fifo */
-- volatile __u8 active_fifos; /* fifos currently active as bit mask */
-- volatile __u8 threshold_mask; /* threshold actually reported */
-- volatile __u8 service_request; /* fifo needs service from task */
-- volatile __u8 ctrl_fifo; /* last selected fifo */
-- volatile __u8 bch_enables; /* or mask for sctrl_r and sctrl register values */
-- volatile __u8 led_req; /* request status of adapters leds */
-- volatile __u8 led_act; /* active status of adapters leds */
-+ volatile int ctrl_in_idx, ctrl_out_idx,
-+ ctrl_cnt; /* input/output pointer + count */
-+ struct urb *ctrl_urb; /* transfer structure for control channel */
-+
-+ struct usb_ctrlrequest ctrl_write; /* buffer for control write request */
-+ struct usb_ctrlrequest ctrl_read; /* same for read request */
-+
-+ __u8 led_state,led_new_data,led_b_active;
-+
-+ volatile __u8 threshold_mask; /* threshold actually reported */
-+ volatile __u8 bch_enables; /* or mask for sctrl_r and sctrl register values */
-+
- usb_fifo fifos[HFCUSB_NUM_FIFOS]; /* structure holding all fifo data */
-
-- /* layer 1 activation/deactivation handling */
-- volatile __u8 l1_state; /* actual l1 state */
-- volatile ulong l1_event; /* event mask */
-- struct tq_struct l1_tq; /* l1 bh structure */
-- struct timer_list t3_timer; /* timer for activation/deactivation */
-- struct timer_list t4_timer; /* timer for activation/deactivation */
-+ volatile __u8 l1_state; /* actual l1 state */
-+ struct timer_list t3_timer; /* timer 3 for activation/deactivation */
-+ struct timer_list t4_timer; /* timer 4 for activation/deactivation */
-+ struct timer_list led_timer; /* timer flashing leds */
-+
- } hfcusb_data;
-
--#if 0
--static void
--usb_dump_urb(purb_t purb)
--{
-- printk("urb :%p\n", purb);
-- printk("next :%p\n", purb->next);
-- printk("dev :%p\n", purb->dev);
-- printk("pipe :%08X\n", purb->pipe);
-- printk("status :%d\n", purb->status);
-- printk("transfer_flags :%08X\n", purb->transfer_flags);
-- printk("transfer_buffer :%p\n", purb->transfer_buffer);
-- printk("transfer_buffer_length:%d\n",
-- purb->transfer_buffer_length);
-- printk("actual_length :%d\n", purb->actual_length);
-- printk("setup_packet :%p\n", purb->setup_packet);
-- printk("start_frame :%d\n", purb->start_frame);
-- printk("number_of_packets :%d\n", purb->number_of_packets);
-- printk("interval :%d\n", purb->interval);
-- printk("error_count :%d\n", purb->error_count);
-- printk("context :%p\n", purb->context);
-- printk("complete :%p\n", purb->complete);
--}
--#endif
-
--/*************************************************************************/
--/* bottom half handler for L1 activation/deactiavtaion + D-chan + E-chan */
--/*************************************************************************/
--static void
--usb_l1d_bh(hfcusb_data * hfc)
--{
-+static void collect_rx_frame(usb_fifo *fifo,__u8 *data,int len,int finish);
-+
-
-- while (hfc->l1_event) {
-- if (test_and_clear_bit
-- (HFCUSB_L1_STATECHANGE, &hfc->l1_event)) {
-- if (hfc->l1_state == 7)
-- hfc->led_req |= LED_L1;
-- else
-- hfc->led_req &= ~LED_L1;
-- if ((hfc->l1_state == 7) ||
-- (hfc->l1_state == 3))
-- hfc->regd.dch_l1l2(hfc->regd.arg_hisax,
-- (hfc->l1_state ==
-- 7) ? (PH_ACTIVATE |
-- INDICATION)
-- : (PH_DEACTIVATE | INDICATION),
-- NULL);
-- }
-- if (test_and_clear_bit(HFCUSB_L1_DRX, &hfc->l1_event)) {
-- hfc->regd.dch_l1l2(hfc->regd.arg_hisax,
-- PH_DATA | INDICATION,
-- (void *) 0);
-- }
-- if (test_and_clear_bit(HFCUSB_L1_ERX, &hfc->l1_event)) {
-- hfc->regd.dch_l1l2(hfc->regd.arg_hisax,
-- PH_DATA | INDICATION,
-- (void *) 1);
-- }
-- if (test_and_clear_bit(HFCUSB_L1_DTX, &hfc->l1_event)) {
-- hfc->regd.dch_l1l2(hfc->regd.arg_hisax,
-- PH_DATA | CONFIRM, NULL);
-- }
-- } /* while */
--} /* usb_l1d_bh */
-
- /******************************************************/
- /* start next background transfer for control channel */
- /******************************************************/
--static void
--ctrl_start_transfer(hfcusb_data * hfc)
-+static void ctrl_start_transfer(hfcusb_data * hfc)
- {
--
-- if (hfc->ctrl_cnt) {
-- switch (hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg) {
-- case HFCUSB_F_USAGE:
-- hfc->ctrl_urb.pipe = hfc->ctrl_in_pipe;
-- hfc->ctrl_urb.setup_packet =
-- (u_char *) & hfc->ctrl_read;
-- hfc->ctrl_urb.transfer_buffer_length = 1;
-- hfc->ctrl_read.index =
-- hfc->ctrl_buff[hfc->ctrl_out_idx].
-- hfc_reg;
-- hfc->ctrl_urb.transfer_buffer =
-- (char *) &hfc->dfifo_fill;
-- break;
--
-- default: /* write register */
-- hfc->ctrl_urb.pipe = hfc->ctrl_out_pipe;
-- hfc->ctrl_urb.setup_packet =
-- (u_char *) & hfc->ctrl_write;
-- hfc->ctrl_urb.transfer_buffer = NULL;
-- hfc->ctrl_urb.transfer_buffer_length = 0;
-- hfc->ctrl_write.index =
-- hfc->ctrl_buff[hfc->ctrl_out_idx].
-- hfc_reg;
-- hfc->ctrl_write.value =
-- hfc->ctrl_buff[hfc->ctrl_out_idx].
-- reg_val;
-- break;
-- }
-- usb_submit_urb(&hfc->ctrl_urb); /* start transfer */
-+ int err;
-+ if(hfc->ctrl_cnt)
-+ {
-+ hfc->ctrl_urb->pipe = hfc->ctrl_out_pipe;
-+ hfc->ctrl_urb->setup_packet = (u_char *) & hfc->ctrl_write;
-+ hfc->ctrl_urb->transfer_buffer = NULL;
-+ hfc->ctrl_urb->transfer_buffer_length = 0;
-+ hfc->ctrl_write.wIndex = hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg;
-+ hfc->ctrl_write.wValue = hfc->ctrl_buff[hfc->ctrl_out_idx].reg_val;
-+ err = usb_submit_urb(hfc->ctrl_urb); /* start transfer */
-+ printk(KERN_DEBUG "ctrl_start_transfer: submit %d\n", err);
- }
- } /* ctrl_start_transfer */
-
-@@ -293,897 +275,1418 @@
- /* queue a control transfer request */
- /* return 0 on success. */
- /************************************/
--static int
--queue_control_request(hfcusb_data * hfc, __u8 reg, __u8 val)
-+static int queue_control_request(hfcusb_data * hfc, __u8 reg, __u8 val,int action)
- {
- ctrl_buft *buf;
-
-- if (hfc->ctrl_cnt >= HFC_CTRL_BUFSIZE)
-- return (1); /* no space left */
-- buf = hfc->ctrl_buff + hfc->ctrl_in_idx; /* pointer to new index */
-+#ifdef VERBOSE_USB_DEBUG
-+ printk ("HFC_USB: queue_control_request reg: %x, val: %x\n", reg, val);
-+#endif
-+
-+ if(hfc->ctrl_cnt >= HFC_CTRL_BUFSIZE) return(1); /* no space left */
-+ buf = &hfc->ctrl_buff[hfc->ctrl_in_idx]; /* pointer to new index */
- buf->hfc_reg = reg;
- buf->reg_val = val;
-+ buf->action=action;
- if (++hfc->ctrl_in_idx >= HFC_CTRL_BUFSIZE)
- hfc->ctrl_in_idx = 0; /* pointer wrap */
- if (++hfc->ctrl_cnt == 1)
- ctrl_start_transfer(hfc);
-- return (0);
--} /* queue_control_request */
-+ return(0);
-+} /* queue_control_request */
-
--/**************************************/
--/* called when timer t3 or t4 expires */
--/**************************************/
--static void
--l1_timer_expire(hfcusb_data * hfc)
--{
-- if (timer_pending(&hfc->t4_timer))
-- del_timer(&hfc->t4_timer);
-- queue_control_request(hfc, HFCUSB_STATES, 0x40);
-- test_and_set_bit(HFCUSB_L1_STATECHANGE,
-- &hfc->l1_event);
-- queue_task(&hfc->l1_tq, &tq_immediate);
-- mark_bh(IMMEDIATE_BH);
--} /* l1_timer_expire */
--
--/**************************************************/
--/* (re)fills a tx-fifo urb. Queuing is done later */
--/**************************************************/
--static void
--fill_tx_urb(usb_fifo * fifo)
--{
-- struct sk_buff *skb;
-- long flags;
-- int i, ii = 0;
--
-- fifo->urb.dev = fifo->hfc->dev;
-- if ((fifo->buff)
-- && (fifo->urb.transfer_buffer_length < fifo->usb_maxlen)) {
-- switch (fifo->fifonum) {
-- case HFCUSB_B1_TX:
-- case HFCUSB_B2_TX:
-- skb = fifo->buff;
-- fifo->buff = NULL;
-- fifo->hfc->regd.bch_l1l2(fifo->hfc->regd.
-- arg_hisax,
-- (fifo->fifonum ==
-- HFCUSB_B1_TX) ? 0
-- : 1,
-- (PH_DATA |
-- CONFIRM),
-- (void *) skb);
-- fifo->hfc->service_request |=
-- fifo->fifo_mask;
-- return;
-- case HFCUSB_D_TX:
-- dev_kfree_skb_any(fifo->buff);
-- fifo->buff = NULL;
-- save_flags(flags);
-- cli();
-- fifo->hfc->dfifo_fill = 0xff; /* currently invalid data */
-- queue_control_request(fifo->hfc,
-- HFCUSB_FIFO,
-- HFCUSB_D_TX);
-- queue_control_request(fifo->hfc,
-- HFCUSB_F_USAGE, 0);
-- restore_flags(flags);
-- return;
-- default:
-- return; /* error, invalid fifo */
-- }
-+
-+static int control_action_handler(hfcusb_data *hfc,int reg,int val,int action)
-+{
-+ if(!action) return(1); // no action defined
-+
-+ return(0);
-+}
-+
-+
-+/***************************************************************/
-+/* control completion routine handling background control cmds */
-+/***************************************************************/
-+static void ctrl_complete(struct urb *urb)
-+{
-+ hfcusb_data *hfc = (hfcusb_data *) urb->context;
-+ ctrl_buft *buf;
-+
-+ printk(KERN_DEBUG "ctrl_complete cnt %d\n", hfc->ctrl_cnt);
-+ urb->dev = hfc->dev;
-+ if(hfc->ctrl_cnt)
-+ {
-+ buf=&hfc->ctrl_buff[hfc->ctrl_out_idx];
-+ control_action_handler(hfc,buf->hfc_reg,buf->reg_val,buf->action);
-+
-+ hfc->ctrl_cnt--; /* decrement actual count */
-+ if(++hfc->ctrl_out_idx >= HFC_CTRL_BUFSIZE) hfc->ctrl_out_idx = 0; /* pointer wrap */
-+
-+ ctrl_start_transfer(hfc); /* start next transfer */
-+ }
-+} /* ctrl_complete */
-+
-+
-+
-+#define LED_OFF 0 // no LED support
-+#define LED_SCHEME1 1 // LED standard scheme
-+#define LED_SCHEME2 2 // not used yet...
-+
-+#define LED_POWER_ON 1
-+#define LED_POWER_OFF 2
-+#define LED_S0_ON 3
-+#define LED_S0_OFF 4
-+#define LED_B1_ON 5
-+#define LED_B1_OFF 6
-+#define LED_B1_DATA 7
-+#define LED_B2_ON 8
-+#define LED_B2_OFF 9
-+#define LED_B2_DATA 10
-+
-+#define LED_NORMAL 0 // LEDs are normal
-+#define LED_INVERTED 1 // LEDs are inverted
-+
-+// time for LED flashing
-+#define LED_TIME 250
-+
-+vendor_data vdata[]=
-+{
-+ {0x959, 0x2bd0, "ISDN USB TA (Cologne Chip HFC-S USB based)", LED_OFF,LED_NORMAL,{4,0,2,1}}, /* CologneChip Eval TA */
-+ {0x7b0, 0x0007, "Billion tiny USB ISDN TA 128", LED_SCHEME1, LED_INVERTED, {8,0x40,0x20,0x10}}, /* Billion TA */
-+ {0x742, 0x2008, "Stollmann USB TA", LED_SCHEME1, LED_NORMAL, {4,0,2,1}}, /* Stollmann TA */
-+ {0x8e3, 0x0301, "Olitec USB RNIS", LED_SCHEME1, LED_NORMAL, {2,0,1,4}}, /* Olitec TA */
-+ {0x675, 0x1688, "DrayTec USB ISDN TA", LED_SCHEME1, LED_NORMAL, {4,0,2,1}}, /* Draytec TA */
-+ {0x7fa, 0x0846, "Bewan Modem RNIS USB", LED_SCHEME1, LED_INVERTED, {8,0x40,0x20,0x10}}, /* Bewan TA */
-+ {0} // EOL element
-+};
-+
-+/***************************************************/
-+/* write led data to auxport & invert if necessary */
-+/***************************************************/
-+static void write_led(hfcusb_data * hfc,__u8 led_state)
-+{
-+ if(led_state!=hfc->led_state)
-+ {
-+ hfc->led_state=led_state;
-+ queue_control_request(hfc, HFCUSB_P_DATA,(vdata[hfc->vend_idx].led_invert) ? ~led_state : led_state,1);
-+ }
-+}
-+
-+/******************************************/
-+/* invert B-channel LEDs if data is sent */
-+/******************************************/
-+static void led_timer(hfcusb_data * hfc)
-+{
-+ static int cnt=0;
-+ __u8 led_state=hfc->led_state;
-+
-+ if(cnt)
-+ {
-+ if(hfc->led_b_active&1) led_state|=vdata[hfc->vend_idx].led_bits[2];
-+ if(hfc->led_b_active&2) led_state|=vdata[hfc->vend_idx].led_bits[3];
-+ }
-+ else
-+ {
-+ if(!(hfc->led_b_active&1) || hfc->led_new_data&1) led_state&=~vdata[hfc->vend_idx].led_bits[2];
-+ if(!(hfc->led_b_active&2) || hfc->led_new_data&2) led_state&=~vdata[hfc->vend_idx].led_bits[3];
- }
-
-- /* check if new buffer needed */
-- if (!fifo->buff) {
-- switch (fifo->fifonum) {
-- case HFCUSB_B1_TX:
-- if (fifo->hfc->regd.bsk[0])
-- fifo->buff = *fifo->hfc->regd.bsk[0]; /* B1-channel tx buffer */
-+ write_led(hfc,led_state);
-+ hfc->led_new_data=0;
-+
-+ cnt=!cnt;
-+ // restart 4 hz timer
-+ hfc->led_timer.expires = jiffies + (LED_TIME * HZ) / 1000;
-+ if(!timer_pending(&hfc->led_timer)) add_timer(&hfc->led_timer);
-+}
-+
-+/**************************/
-+/* handle LED requests */
-+/**************************/
-+static void handle_led(hfcusb_data * hfc,int event)
-+{
-+ __u8 led_state=hfc->led_state;
-+
-+ // if no scheme -> no LED action
-+ if(vdata[hfc->vend_idx].led_scheme==LED_OFF) return;
-+
-+ switch(event)
-+ {
-+ case LED_POWER_ON:
-+ led_state|=vdata[hfc->vend_idx].led_bits[0];
-+ break;
-+ case LED_POWER_OFF: // no Power off handling
-+ break;
-+ case LED_S0_ON:
-+ led_state|=vdata[hfc->vend_idx].led_bits[1];
-+ break;
-+ case LED_S0_OFF:
-+ led_state&=~vdata[hfc->vend_idx].led_bits[1];
- break;
-- case HFCUSB_B2_TX:
-- if (fifo->hfc->regd.bsk[1])
-- fifo->buff = *fifo->hfc->regd.bsk[1]; /* B2-channel tx buffer */
-+ case LED_B1_ON:
-+ hfc->led_b_active|=1;
- break;
-- case HFCUSB_D_TX:
-- if (fifo->hfc->regd.dsq)
-- fifo->buff = skb_dequeue(fifo->hfc->regd.dsq); /* D-channel tx queue */
-+ case LED_B1_OFF:
-+ hfc->led_b_active&=~1;
- break;
-- default:
-- return; /* error, invalid fifo */
-+ case LED_B1_DATA:
-+ hfc->led_new_data|=1;
-+ break;
-+ case LED_B2_ON:
-+ hfc->led_b_active|=2;
-+ break;
-+ case LED_B2_OFF:
-+ hfc->led_b_active&=~2;
-+ break;
-+ case LED_B2_DATA:
-+ hfc->led_new_data|=2;
-+ break;
-+ }
-+
-+ write_led(hfc,led_state);
-+}
-+
-+/********************************/
-+/* called when timer t3 expires */
-+/********************************/
-+static void l1_timer_expire_t3(hfcusb_data * hfc)
-+{
-+ //printk (KERN_INFO "HFC-USB: l1_timer_expire_t3\n");
-+
-+ hfc->d_if.ifc.l1l2(&hfc->d_if.ifc,PH_DEACTIVATE | INDICATION,NULL);
-+#ifdef VERBOSE_USB_DEBUG
-+ printk(KERN_INFO "PH_DEACTIVATE | INDICATION sent\n");
-+#endif
-+ hfc->l1_activated=FALSE;
-+ handle_led(hfc,LED_S0_OFF);
-+}
-+
-+/********************************/
-+/* called when timer t4 expires */
-+/********************************/
-+static void l1_timer_expire_t4(hfcusb_data * hfc)
-+{
-+ //printk (KERN_INFO "HFC-USB: l1_timer_expire_t4\n");
-+
-+ hfc->d_if.ifc.l1l2(&hfc->d_if.ifc,PH_DEACTIVATE | INDICATION,NULL);
-+#ifdef VERBOSE_USB_DEBUG
-+ printk(KERN_INFO "PH_DEACTIVATE | INDICATION sent\n");
-+#endif
-+ hfc->l1_activated=FALSE;
-+ handle_led(hfc,LED_S0_OFF);
-+}
-+
-+/*****************************/
-+/* handle S0 state changes */
-+/*****************************/
-+static void state_handler(hfcusb_data * hfc,__u8 state)
-+{
-+ __u8 old_state;
-+
-+ old_state=hfc->l1_state;
-+
-+ // range check
-+ if(state==old_state || state<1 || state>8) return;
-+
-+#ifdef VERBOSE_ISDN_DEBUG
-+ printk(KERN_INFO "HFC-USB: new S0 state:%d old_state:%d\n",state,old_state);
-+#endif
-+
-+ if(state<4 || state==7 || state==8)
-+ {
-+ if(timer_pending(&hfc->t3_timer)) del_timer(&hfc->t3_timer);
-+ //printk(KERN_INFO "HFC-USB: T3 deactivated\n");
-+ }
-+
-+ if(state>=7)
-+ {
-+ if(timer_pending(&hfc->t4_timer)) del_timer(&hfc->t4_timer);
-+ //printk(KERN_INFO "HFC-USB: T4 deactivated\n");
-+ }
-+
-+ if(state==7 && !hfc->l1_activated)
-+ {
-+ hfc->d_if.ifc.l1l2(&hfc->d_if.ifc,PH_ACTIVATE | INDICATION,NULL);
-+ //printk(KERN_INFO "HFC-USB: PH_ACTIVATE | INDICATION sent\n");
-+ hfc->l1_activated=TRUE;
-+ handle_led(hfc,LED_S0_ON);
-+ }
-+ else
-+ if(state<=3 /* && activated*/)
-+ {
-+ if(old_state==7 || old_state==8)
-+ {
-+ //printk(KERN_INFO "HFC-USB: T4 activated\n");
-+ hfc->t4_timer.expires = jiffies + (HFC_TIMER_T4 * HZ) / 1000;
-+ if(!timer_pending(&hfc->t4_timer)) add_timer(&hfc->t4_timer);
- }
-- if (!fifo->buff) {
-- fifo->active = 0; /* we are inactive now */
-- fifo->hfc->active_fifos &= ~fifo->fifo_mask;
-- if (fifo->fifonum == HFCUSB_D_TX) {
-- test_and_set_bit(HFCUSB_L1_DTX,
-- &fifo->hfc->l1_event);
-- queue_task(&fifo->hfc->l1_tq,
-- &tq_immediate);
-- mark_bh(IMMEDIATE_BH);
-- }
-- return;
-+ else
-+ {
-+ hfc->d_if.ifc.l1l2(&hfc->d_if.ifc,PH_DEACTIVATE | INDICATION,NULL);
-+ //printk(KERN_INFO "HFC-USB: PH_DEACTIVATE | INDICATION sent\n");
-+ hfc->l1_activated=FALSE;
-+ handle_led(hfc,LED_S0_OFF);
- }
-- fifo->act_ptr = fifo->buff->data; /* start of data */
-- fifo->active = 1;
-- ii = 1;
-- fifo->hfc->active_fifos |= fifo->fifo_mask;
-- fifo->hfc->service_request &= ~fifo->fifo_mask;
-- }
-- /* fillup the send buffer */
-- i = fifo->buff->len - (fifo->act_ptr - fifo->buff->data); /* remaining length */
-- fifo->buffer[0] = !fifo->transmode; /* not eof */
-- if (i > (fifo->usb_maxlen - ii)) {
-- i = fifo->usb_maxlen - ii;
-- }
-- if (i)
-- memcpy(fifo->buffer + ii, fifo->act_ptr, i);
-- fifo->urb.transfer_buffer_length = i + ii;
-- fifo->rx_offset = ii;
--} /* fill_tx_urb */
--
--/************************************************/
--/* transmit completion routine for all tx fifos */
--/************************************************/
--static void
--tx_complete(purb_t urb)
-+ }
-+
-+ hfc->l1_state=state;
-+}
-+
-+
-+/* prepare iso urb */
-+static void fill_isoc_urb(struct urb *urb, struct usb_device *dev, unsigned int pipe, void *buf,
-+ int num_packets, int packet_size, int interval, usb_complete_t complete, void *context)
- {
-- usb_fifo *fifo = (usb_fifo *) urb->context; /* pointer to our fifo */
-+ int k;
-
-- fifo->hfc->service_request &= ~fifo->fifo_mask; /* no further handling */
-- fifo->framenum = usb_get_current_frame_number(fifo->hfc->dev);
-+ spin_lock_init(&urb->lock); // do we really need spin_lock_init ?
-+ urb->dev = dev;
-+ urb->pipe = pipe;
-+ urb->complete = complete;
-+ urb->number_of_packets = num_packets;
-+ urb->transfer_buffer_length = packet_size * num_packets;
-+ urb->context = context;
-+ urb->transfer_buffer = buf;
-+ urb->transfer_flags = 0;
-+ urb->transfer_flags = USB_ISO_ASAP;
-+ urb->actual_length = 0;
-+ urb->interval = interval;
-+ for (k = 0; k < num_packets; k++) {
-+ urb->iso_frame_desc[k].offset = packet_size * k;
-+ urb->iso_frame_desc[k].length = packet_size;
-+ urb->iso_frame_desc[k].actual_length = 0;
-+ }
-+}
-
-- /* check for deactivation or error */
-- if ((!fifo->active) || (urb->status)) {
-- fifo->hfc->active_fifos &= ~fifo->fifo_mask; /* we are inactive */
-- fifo->active = 0;
-- if ((fifo->buff) && (fifo->fifonum == HFCUSB_D_TX)) {
-- dev_kfree_skb_any(fifo->buff);
-+/* allocs urbs and start isoc transfer with two pending urbs to avoid gaps in the transfer chain */
-+static int start_isoc_chain(usb_fifo * fifo, int num_packets_per_urb,usb_complete_t complete,int packet_size)
-+{
-+ int i, k, errcode;
-+
-+#ifdef VERBOSE_USB_DEBUG
-+ printk(KERN_INFO "HFC-USB: starting ISO-chain for Fifo %i\n", fifo->fifonum);
-+#endif
-+
-+
-+ // allocate Memory for Iso out Urbs
-+ for (i = 0; i < 2; i++) {
-+ if (!(fifo->iso[i].purb)) {
-+ fifo->iso[i].purb = usb_alloc_urb(num_packets_per_urb);
-+ fifo->iso[i].owner_fifo = (struct usb_fifo *) fifo;
-+
-+ // Init the first iso
-+ if (ISO_BUFFER_SIZE >= (fifo->usb_packet_maxlen * num_packets_per_urb))
-+ {
-+
-+ fill_isoc_urb(fifo->iso[i].purb, fifo->hfc->dev, fifo->pipe, fifo->iso[i].buffer,
-+ num_packets_per_urb, fifo->usb_packet_maxlen, fifo->intervall,
-+ complete, &fifo->iso[i]);
-+
-+ memset(fifo->iso[i].buffer, 0, sizeof(fifo->iso[i].buffer));
-+
-+ // defining packet delimeters in fifo->buffer
-+ for(k = 0; k < num_packets_per_urb; k++)
-+ {
-+ fifo->iso[i].purb->iso_frame_desc[k].offset = k*packet_size;
-+ fifo->iso[i].purb->iso_frame_desc[k].length = packet_size;
-+ }
-+ }
- }
-- fifo->buff = NULL;
-- return;
-+
-+ fifo->bit_line = BITLINE_INF;
-+
-+ errcode = usb_submit_urb(fifo->iso[i].purb);
-+ fifo->active = (errcode >= 0) ? 1 : 0;
-+ if(errcode < 0)
-+ {
-+ printk(KERN_INFO "HFC-USB: error submitting ISO URB: %i.%i \n", errcode, i);
-+ };
-+
- }
-- fifo->act_ptr += (urb->transfer_buffer_length - fifo->rx_offset); /* adjust pointer */
-- fill_tx_urb(fifo); /* refill the urb */
-- fifo->hfc->threshold_mask |= fifo->fifo_mask; /* assume threshold reached */
-- if (fifo->buff)
-- fifo->hfc->service_request |= fifo->fifo_mask; /* need to restart */
--} /* tx_complete */
-
--/***********************************************/
--/* receive completion routine for all rx fifos */
--/***********************************************/
--static void
--rx_complete(purb_t urb)
-+ // errcode = (usb_submit_urb(fifo->iso[0].purb, GFP_KERNEL));
-+ return(fifo->active);
-+}
-+
-+/* stops running iso chain and frees their pending urbs */
-+static void stop_isoc_chain(usb_fifo * fifo)
- {
-- usb_fifo *fifo = (usb_fifo *) urb->context; /* pointer to our fifo */
-- hfcusb_data *hfc = fifo->hfc;
-- usb_fifo *txfifo;
-- __u8 last_state;
-- int i, ii, currcnt, hdlci;
-- struct sk_buff *skb;
--
-- urb->dev = hfc->dev; /* security init */
-- if ((!fifo->active) || (urb->status)) {
-- hfc->service_request &= ~fifo->fifo_mask; /* no further handling */
-- hfc->active_fifos &= ~fifo->fifo_mask; /* we are inactive */
-- fifo->urb.interval = 0; /* cancel automatic rescheduling */
-- if (fifo->buff) {
-- dev_kfree_skb_any(fifo->buff);
-- fifo->buff = NULL;
-+ int i;
-+
-+ for(i = 0; i < 2; i++)
-+ {
-+ if(fifo->iso[i].purb)
-+ {
-+#ifdef VERBOSE_USB_DEBUG
-+ printk(KERN_INFO "HFC-USB: Stopping iso chain for fifo %i.%i\n", fifo->fifonum, i);
-+#endif
-+ usb_unlink_urb(fifo->iso[i].purb);
-+ usb_free_urb(fifo->iso[i].purb);
-+ fifo->iso[i].purb = NULL;
- }
-- return;
- }
-+ if (fifo->urb) {
-+ usb_unlink_urb(fifo->urb);
-+ usb_free_urb(fifo->urb);
-+ fifo->urb = NULL;
-+ }
-+ fifo->active = 0;
-+}
-
-- /* first check for any status changes */
-- if ((urb->actual_length < fifo->rx_offset)
-- || (urb->actual_length > fifo->usb_maxlen))
-- return; /* error condition */
--
-- if (fifo->rx_offset) {
-- hfc->threshold_mask = fifo->buffer[1]; /* update threshold status */
-- fifo->next_complete = fifo->buffer[0] & 1;
-- if ((fifo->fifonum == HFCUSB_D_RX) &&
-- (hfc->led_req != hfc->led_act))
-- queue_control_request(hfc, HFCUSB_P_DATA, hfc->led_req);
--
-- /* check if rescheduling needed */
-- if ((i =
-- hfc->service_request & hfc->active_fifos & ~hfc->
-- threshold_mask)) {
-- currcnt =
-- usb_get_current_frame_number(hfc->dev);
-- txfifo = hfc->fifos + HFCUSB_B1_TX;
-- ii = 3;
-- while (ii--) {
-- if ((i & txfifo->fifo_mask)
-- && (currcnt != txfifo->framenum)) {
-- hfc->service_request &=
-- ~txfifo->fifo_mask;
-- if (!txfifo->buff)
-- fill_tx_urb(txfifo);
-- if (txfifo->buff)
-- usb_submit_urb(&txfifo->
-- urb);
-+// defines how much ISO packets are handled in one URB
-+static int iso_packets[8]={ISOC_PACKETS_B,ISOC_PACKETS_B,ISOC_PACKETS_B,ISOC_PACKETS_B,
-+ ISOC_PACKETS_D,ISOC_PACKETS_D,ISOC_PACKETS_D,ISOC_PACKETS_D};
-+
-+/*****************************************************/
-+/* transmit completion routine for all ISO tx fifos */
-+/*****************************************************/
-+static void tx_iso_complete(struct urb *urb)
-+{
-+ iso_urb_struct *context_iso_urb = (iso_urb_struct *) urb->context;
-+ usb_fifo *fifo = context_iso_urb->owner_fifo;
-+ hfcusb_data *hfc = fifo->hfc;
-+ int k, tx_offset, num_isoc_packets, sink, len, current_len,errcode,frame_complete,transp_mode,fifon;
-+ __u8 threshbit;
-+ __u8 threshtable[8] = { 1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80};
-+
-+ fifon=fifo->fifonum;
-+ tx_offset=0;
-+ // very weird error code when using ohci drivers, for now : ignore this error ... (MB)
-+ if(urb->status == -EOVERFLOW)
-+ {
-+ urb->status = 0;
-+#ifdef VERBOSE_USB_DEBUG
-+ printk(KERN_INFO "HFC-USB: ignoring USB DATAOVERRUN for fifo %i \n",fifon);
-+#endif
-+ }
-+
-+ if(fifo->active && !urb->status)
-+ {
-+ transp_mode=0;
-+ if(fifon<4 && hfc->b_mode[fifon/2]==L1_MODE_TRANS) transp_mode=TRUE;
-+
-+ threshbit = threshtable[fifon] & hfc->threshold_mask; // is threshold set for our channel?
-+ num_isoc_packets=iso_packets[fifon];
-+
-+ if(fifon >= HFCUSB_D_TX)
-+ {
-+ sink = (threshbit) ? SINK_DMIN : SINK_DMAX; // how much bit go to the sink for D-channel?
-+ }
-+ else
-+ {
-+ sink = (threshbit) ? SINK_MIN : SINK_MAX; // how much bit go to the sink for B-channel?
-+ }
-+
-+ // prepare ISO Urb
-+ fill_isoc_urb(urb, fifo->hfc->dev, fifo->pipe,context_iso_urb->buffer, num_isoc_packets,
-+ fifo->usb_packet_maxlen, fifo->intervall, tx_iso_complete, urb->context);
-+ memset(context_iso_urb->buffer, 0, sizeof(context_iso_urb->buffer));
-+
-+ frame_complete=FALSE;
-+
-+ // Generate Iso Packets
-+ for(k = 0; k < num_isoc_packets; ++k)
-+ {
-+ if(fifo->skbuff)
-+ {
-+ len = fifo->skbuff->len; // remaining length
-+
-+ fifo->bit_line -= sink; // we lower data margin every msec
-+ current_len = (0 - fifo->bit_line) / 8;
-+ if(current_len > 14) current_len = 14; // maximum 15 byte for every ISO packet makes our life easier
-+ current_len = (len <= current_len) ? len : current_len;
-+ fifo->bit_line += current_len * 8; // how much bit do we put on the line?
-+
-+ context_iso_urb->buffer[tx_offset] = 0;
-+ if(current_len == len)
-+ {
-+ if(!transp_mode)
-+ {
-+ context_iso_urb->buffer[tx_offset] = 1; // here frame completion
-+ fifo->bit_line += 32; // add 2 byte flags and 16bit CRC at end of ISDN frame
-+ }
-+ frame_complete = TRUE;
-+ }
-+
-+ // copy bytes from buffer into ISO_URB
-+ memcpy(context_iso_urb->buffer+tx_offset+1,fifo->skbuff->data,current_len);
-+ skb_pull(fifo->skbuff,current_len);
-+
-+ // define packet delimeters within the URB buffer
-+ urb->iso_frame_desc[k].offset = tx_offset;
-+ urb->iso_frame_desc[k].length = current_len + 1;
-+
-+ tx_offset += (current_len + 1);
-+ // printk(KERN_INFO "HFC-USB: fifonum:%d,%d bytes to send, %d bytes ISO packet,bitline:%d,sink:%d,threshbit:%d,threshmask:%x\n",fifon,len,current_len,fifo->bit_line,sink,threshbit,hfc->threshold_mask);
-+ if(!transp_mode)
-+ {
-+ if(fifon==HFCUSB_B1_TX) handle_led(hfc,LED_B1_DATA);
-+ if(fifon==HFCUSB_B2_TX) handle_led(hfc,LED_B2_DATA);
-+ }
-+ }
-+ else
-+ {
-+ // we have no more data - generate 1 byte ISO packets
-+ urb->iso_frame_desc[k].offset = tx_offset++;
-+
-+ urb->iso_frame_desc[k].length = 1;
-+ fifo->bit_line -= sink; // we lower data margin every msec
-+
-+ if(fifo->bit_line < BITLINE_INF)
-+ {
-+ fifo->bit_line = BITLINE_INF;
-+ //printk (KERN_INFO "HFC-USB: BITLINE_INF underrun\n");
- }
-- txfifo += 2;
- }
-- }
-
-- /* handle l1 events */
-- if ((fifo->buffer[0] >> 4) != hfc->l1_state) {
-- last_state = hfc->l1_state;
-- hfc->l1_state = fifo->buffer[0] >> 4; /* update status */
-- if (timer_pending(&hfc->t4_timer))
-- del_timer(&hfc->t4_timer);
-- if (((hfc->l1_state == 3) &&
-- ((last_state == 7) ||
-- (last_state == 8))) ||
-- ((timer_pending(&hfc->t3_timer) &&
-- (hfc->l1_state == 8)))) {
-- hfc->t4_timer.expires = jiffies + 2;
-- add_timer(&hfc->t4_timer);
-- } else {
-- if (timer_pending(&hfc->t3_timer)
-- && (hfc->l1_state == 7))
-- del_timer(&hfc->t3_timer); /* no longer needed */
-- test_and_set_bit(HFCUSB_L1_STATECHANGE,
-- &hfc->l1_event);
-- queue_task(&hfc->l1_tq, &tq_immediate);
-- mark_bh(IMMEDIATE_BH);
-+ if(frame_complete)
-+ {
-+ // delete the buffer only once, here or in hfc_usb_l2l1() in a PH_DATA|REQUEST
-+ fifo->delete_flg=TRUE;
-+
-+ fifo->hif->l1l2(fifo->hif,PH_DATA|CONFIRM,(void*)fifo->skbuff->truesize);
-+
-+ if(fifo->skbuff && fifo->delete_flg)
-+ {
-+ dev_kfree_skb_any(fifo->skbuff);
-+ //printk(KERN_INFO "HFC-USB: skbuff=NULL on fifo:%d\n",fifo->fifonum);
-+ fifo->skbuff = NULL;
-+ fifo->delete_flg=FALSE;
-+ }
-+
-+ frame_complete=FALSE;
- }
-+ }
-+
-+ errcode = usb_submit_urb(urb);
-+ if(errcode < 0)
-+ {
-+ printk(KERN_INFO "HFC-USB: error submitting ISO URB: %i \n", errcode);
-+ }
-+ }
-+ else
-+ {
-+ if(urb->status)
-+ {
-+ printk(KERN_INFO "HFC-USB: tx_iso_complete : urb->status %i, fifonum %i\n", urb->status,fifon);
- }
- }
-
-- /* check the length for data and move if present */
-- if (fifo->next_complete || (urb->actual_length > fifo->rx_offset)) {
-- i = fifo->buff->len + urb->actual_length - fifo->rx_offset; /* new total length */
-- hdlci = (fifo->transmode) ? 0 : 3;
-- if (i <= (fifo->max_size + hdlci)) {
-- memcpy(fifo->act_ptr,
-- fifo->buffer + fifo->rx_offset,
-- urb->actual_length - fifo->rx_offset);
-- fifo->act_ptr +=
-- (urb->actual_length - fifo->rx_offset);
-- fifo->buff->len +=
-- (urb->actual_length - fifo->rx_offset);
-- } else
-- fifo->buff->len = fifo->max_size + 4; /* mark frame as to long */
-- if (fifo->next_complete && (urb->actual_length < fifo->usb_maxlen)) {
-- /* the frame is complete */
-- fifo->next_complete = 0;
-- if (((!*(fifo->act_ptr - 1)) || fifo->transmode) &&
-- (fifo->buff->len >= (hdlci + 1))
-- && (fifo->buff->len <=
-- (fifo->max_size + hdlci)) &&
-- ((skb = dev_alloc_skb(fifo->max_size + hdlci)) != NULL)) {
-- fifo->buff->len -= hdlci; /* adjust size */
-- switch (fifo->fifonum) {
-- case HFCUSB_D_RX:
-- skb_queue_tail(hfc->regd.
-- drq,
-- fifo->buff);
-- test_and_set_bit
-- (HFCUSB_L1_DRX,
-- &hfc->l1_event);
-- queue_task(&hfc->l1_tq,
-- &tq_immediate);
-- mark_bh(IMMEDIATE_BH);
-- break;
-+} /* tx_iso_complete */
-
-- case HFCUSB_B1_RX:
-- if (hfc->regd.brq[0]) {
-- skb_queue_tail
-- (hfc->regd.
-- brq[0],
-- fifo->buff);
-- hfc->regd.
-- bch_l1l2(hfc->
-- regd.
-- arg_hisax,
-- 0,
-- PH_DATA
-- |
-- INDICATION,
-- (void *)
-- fifo->
-- buff);
-- } else
-- dev_kfree_skb_any
-- (fifo->buff);
-- break;
--
-- case HFCUSB_B2_RX:
-- if (hfc->regd.brq[1]) {
-- skb_queue_tail
-- (hfc->regd.
-- brq[1],
-- fifo->buff);
-- hfc->regd.
-- bch_l1l2(hfc->
-- regd.
-- arg_hisax,
-- 1,
-- PH_DATA
-- |
-- INDICATION,
-- (void
-- *)
-- fifo->
-- buff);
-- } else
-- dev_kfree_skb_any
-- (fifo->buff);
-- break;
-+/*****************************************************/
-+/* receive completion routine for all ISO tx fifos */
-+/*****************************************************/
-+static void rx_iso_complete(struct urb *urb)
-+{
-+ iso_urb_struct *context_iso_urb = (iso_urb_struct *) urb->context;
-+ usb_fifo *fifo = context_iso_urb->owner_fifo;
-+ hfcusb_data *hfc = fifo->hfc;
-+ int k, len, errcode, offset, num_isoc_packets,fifon;
-+ __u8 *buf;
-
-- case HFCUSB_PCM_RX:
-- skb_queue_tail(&hfc->regd.
-- erq,
-- fifo->buff);
-- test_and_set_bit
-- (HFCUSB_L1_ERX,
-- &hfc->l1_event);
-- queue_task(&hfc->l1_tq,
-- &tq_immediate);
-- mark_bh(IMMEDIATE_BH);
-- break;
-+ fifon=fifo->fifonum;
-+ // very weird error code when using ohci drivers, for now : ignore this error ... (MB)
-+ if(urb->status == -EOVERFLOW)
-+ {
-+ urb->status = 0;
-+#ifdef VERBOSE_USB_DEBUG
-+ printk(KERN_INFO "HFC-USB: ignoring USB DATAOVERRUN for fifo %i \n",fifon);
-+#endif
-+ }
-
-- default:
-- dev_kfree_skb_any(fifo->
-- buff);
-- break;
-+ if(fifo->active && !urb->status)
-+ {
-+ num_isoc_packets=iso_packets[fifon];
-+
-+ // Generate D-Channel Iso Packets
-+ for(k = 0; k < num_isoc_packets; ++k)
-+ {
-+ len=urb->iso_frame_desc[k].actual_length;
-+ offset=urb->iso_frame_desc[k].offset;
-+ buf=context_iso_urb->buffer+offset;
-+
-+ if(fifo->last_urblen!=fifo->usb_packet_maxlen)
-+ {
-+ // the threshold mask is in the 2nd status byte
-+ hfc->threshold_mask=buf[1];
-+ // the S0 state is in the upper half of the 1st status byte
-+ state_handler(hfc,buf[0] >> 4);
-+ // if we have more than the 2 status bytes -> collect data
-+ if(len>2) collect_rx_frame(fifo,buf+2,len-2,buf[0]&1);
- }
-- fifo->buff = skb;
-- }
-- fifo->buff->len = 0; /* reset counter */
-- fifo->act_ptr = fifo->buff->data; /* and pointer */
-+ else collect_rx_frame(fifo,buf,len,0);
-+
-+ fifo->last_urblen=len;
-+
-+ }
-+
-+ // prepare ISO Urb
-+ fill_isoc_urb(urb, fifo->hfc->dev, fifo->pipe,context_iso_urb->buffer, num_isoc_packets,
-+ fifo->usb_packet_maxlen, fifo->intervall, rx_iso_complete, urb->context);
-+
-+ errcode = usb_submit_urb(urb);
-+ if(errcode < 0)
-+ {
-+ printk(KERN_INFO "HFC-USB: error submitting ISO URB: %i \n", errcode);
-+ }
-+ }
-+ else
-+ {
-+ if(urb->status)
-+ {
-+ printk(KERN_INFO "HFC-USB: rx_iso_complete : urb->status %i, fifonum %i\n", urb->status,fifon);
-+ }
-+ }
-+} /* rx_iso_complete */
-+
-+
-+/*****************************************************/
-+/* collect data from interrupt or isochron in */
-+/*****************************************************/
-+static void collect_rx_frame(usb_fifo *fifo,__u8 *data,int len,int finish)
-+{
-+ hfcusb_data *hfc = fifo->hfc;
-+ int transp_mode,fifon;
-+
-+ fifon=fifo->fifonum;
-+ transp_mode=0;
-+ if(fifon<4 && hfc->b_mode[fifon/2]==L1_MODE_TRANS) transp_mode=TRUE;
-+
-+ //printk(KERN_INFO "HFC-USB: got %d bytes finish:%d max_size:%d fifo:%d\n",len,finish,fifo->max_size,fifon);
-+ if(!fifo->skbuff)
-+ {
-+ // allocate sk buffer
-+ fifo->skbuff=dev_alloc_skb(fifo->max_size + 3);
-+ if(!fifo->skbuff)
-+ {
-+ printk(KERN_INFO "HFC-USB: cannot allocate buffer (dev_alloc_skb) fifo:%d\n",fifon);
-+ return;
-+ }
-+
-+ }
-+
-+ if(len && fifo->skbuff->len+len<fifo->max_size)
-+ {
-+ memcpy(skb_put(fifo->skbuff,len),data,len);
-+ }
-+ else printk(KERN_INFO "HCF-USB: got frame exceeded fifo->max_size:%d\n",fifo->max_size);
-+
-+ // give transparent data up, when 128 byte are available
-+ if(transp_mode && fifo->skbuff->len>=128)
-+ {
-+ fifo->hif->l1l2(fifo->hif,PH_DATA | INDICATION,fifo->skbuff);
-+ fifo->skbuff = NULL; // buffer was freed from upper layer
-+ return;
-+ }
-+
-+ // we have a complete hdlc packet
-+ if(finish)
-+ {
-+ if(!fifo->skbuff->data[fifo->skbuff->len-1])
-+ {
-+ skb_trim(fifo->skbuff,fifo->skbuff->len-3); // remove CRC & status
-+
-+ //printk(KERN_INFO "HFC-USB: got frame %d bytes on fifo:%d\n",fifo->skbuff->len,fifon);
-+
-+ if(fifon==HFCUSB_PCM_RX) fifo->hif->l1l2(fifo->hif,PH_DATA_E | INDICATION,fifo->skbuff);
-+ else fifo->hif->l1l2(fifo->hif,PH_DATA | INDICATION,fifo->skbuff);
-+
-+ fifo->skbuff = NULL; // buffer was freed from upper layer
-+ }
-+ else
-+ {
-+ printk(KERN_INFO "HFC-USB: got frame %d bytes but CRC ERROR!!!\n",fifo->skbuff->len);
-+
-+ skb_trim(fifo->skbuff,0); // clear whole buffer
-+ }
-+ }
-+
-+ // LED flashing only in HDLC mode
-+ if(!transp_mode)
-+ {
-+ if(fifon==HFCUSB_B1_RX) handle_led(hfc,LED_B1_DATA);
-+ if(fifon==HFCUSB_B2_RX) handle_led(hfc,LED_B2_DATA);
-+ }
-+}
-+
-+/***********************************************/
-+/* receive completion routine for all rx fifos */
-+/***********************************************/
-+static void rx_complete(struct urb *urb)
-+{
-+ int len;
-+ __u8 *buf;
-+ usb_fifo *fifo = (usb_fifo *) urb->context; /* pointer to our fifo */
-+ hfcusb_data *hfc = fifo->hfc;
-+
-+ urb->dev = hfc->dev; /* security init */
-+
-+ if((!fifo->active) || (urb->status)) {
-+#ifdef VERBOSE_USB_DEBUG
-+ printk(KERN_INFO "HFC-USB: RX-Fifo %i is going down (%i)\n", fifo->fifonum, urb->status);
-+#endif
-+ fifo->urb->interval = 0; /* cancel automatic rescheduling */
-+ if(fifo->skbuff) {
-+ dev_kfree_skb_any(fifo->skbuff);
-+ fifo->skbuff = NULL;
- }
-+ return;
- }
-- fifo->rx_offset = (urb->actual_length < fifo->usb_maxlen) ? 2 : 0;
--} /* rx_complete */
-+
-+ len=urb->actual_length;
-+ buf=fifo->buffer;
-+
-+ if(fifo->last_urblen!=fifo->usb_packet_maxlen) {
-+ // the threshold mask is in the 2nd status byte
-+ hfc->threshold_mask=buf[1];
-+ // the S0 state is in the upper half of the 1st status byte
-+ state_handler(hfc,buf[0] >> 4);
-+ // if we have more than the 2 status bytes -> collect data
-+ if(len>2) collect_rx_frame(fifo,buf+2,urb->actual_length-2,buf[0]&1);
-+ } else
-+ collect_rx_frame(fifo,buf,urb->actual_length,0);
-+
-+ fifo->last_urblen=urb->actual_length;
-+
-+
-+} /* rx_complete */
-+
-+
-
- /***************************************************/
- /* start the interrupt transfer for the given fifo */
- /***************************************************/
--static void
--start_rx_fifo(usb_fifo * fifo)
-+static void start_int_fifo(usb_fifo * fifo)
- {
-- if (fifo->buff)
-- return; /* still active */
-- if (!
-- (fifo->buff =
-- dev_alloc_skb(fifo->max_size + (fifo->transmode ? 0 : 3))))
-- return;
-- fifo->act_ptr = fifo->buff->data;
-- FILL_INT_URB(&fifo->urb, fifo->hfc->dev, fifo->pipe, fifo->buffer,
-- fifo->usb_maxlen, rx_complete, fifo, fifo->intervall);
-- fifo->next_complete = 0;
-- fifo->rx_offset = 2;
-- fifo->active = 1; /* must be marked active */
-- fifo->hfc->active_fifos |= fifo->fifo_mask;
-- if (usb_submit_urb(&fifo->urb)) {
-+ int errcode;
-+
-+#ifdef VERBOSE_USB_DEBUG
-+ printk(KERN_INFO "HFC-USB: starting intr IN fifo:%d\n", fifo->fifonum);
-+#endif
-+ if (!fifo->urb) {
-+ fifo->urb = usb_alloc_urb(0);
-+ if (!fifo->urb)
-+ return;
-+ }
-+ usb_fill_int_urb(fifo->urb, fifo->hfc->dev, fifo->pipe, fifo->buffer,
-+ fifo->usb_packet_maxlen, rx_complete, fifo, fifo->intervall);
-+ fifo->active = 1; /* must be marked active */
-+ errcode = usb_submit_urb(fifo->urb);
-+
-+ if(errcode)
-+ {
-+ printk(KERN_INFO "HFC-USB: submit URB error(start_int_info): status:%i\n", errcode);
- fifo->active = 0;
-- fifo->hfc->active_fifos &= ~fifo->fifo_mask;
-- dev_kfree_skb_any(fifo->buff);
-- fifo->buff = NULL;
-+ fifo->skbuff = NULL;
- }
--} /* start_rx_fifo */
-+} /* start_int_fifo */
-
--/***************************************************************/
--/* control completion routine handling background control cmds */
--/***************************************************************/
--static void
--ctrl_complete(purb_t urb)
-+/*****************************/
-+/* set the B-channel mode */
-+/*****************************/
-+static void set_hfcmode(hfcusb_data *hfc,int channel,int mode)
- {
-- hfcusb_data *hfc = (hfcusb_data *) urb->context;
-+ __u8 val,idx_table[2]={0,2};
-
-- urb->dev = hfc->dev;
-- if (hfc->ctrl_cnt) {
-- switch (hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg) {
-- case HFCUSB_FIFO:
-- hfc->ctrl_fifo =
-- hfc->ctrl_buff[hfc->ctrl_out_idx].
-- reg_val;
-- break;
-- case HFCUSB_F_USAGE:
-- if (!hfc->dfifo_fill) {
-- fill_tx_urb(hfc->fifos +
-- HFCUSB_D_TX);
-- if (hfc->fifos[HFCUSB_D_TX].buff)
-- usb_submit_urb(&hfc->
-- fifos
-- [HFCUSB_D_TX].
-- urb);
-- } else {
-- queue_control_request(hfc,
-- HFCUSB_FIFO,
-- HFCUSB_D_TX);
-- queue_control_request(hfc,
-- HFCUSB_F_USAGE,
-- 0);
-- }
-- break;
-- case HFCUSB_SCTRL_R:
-- switch (hfc->ctrl_fifo) {
-- case HFCUSB_B1_RX:
-- if (hfc->bch_enables & 1)
-- start_rx_fifo(hfc->
-- fifos
-- +
-- HFCUSB_B1_RX);
-- break;
-- case HFCUSB_B2_RX:
-- if (hfc->bch_enables & 2)
-- start_rx_fifo(hfc->
-- fifos
-- +
-- HFCUSB_B2_RX);
-- break;
-- }
-- if (hfc->bch_enables & 3)
-- hfc->led_req |= LED_BCH;
-- else
-- hfc->led_req &= ~LED_BCH;
-- break;
-- case HFCUSB_P_DATA:
-- hfc->led_act =
-- hfc->ctrl_buff[hfc->ctrl_out_idx].
-- reg_val;
-- break;
-- }
-- hfc->ctrl_cnt--; /* decrement actual count */
-- if (++hfc->ctrl_out_idx >= HFC_CTRL_BUFSIZE)
-- hfc->ctrl_out_idx = 0; /* pointer wrap */
-- ctrl_start_transfer(hfc); /* start next transfer */
-+#ifdef VERBOSE_ISDN_DEBUG
-+ printk (KERN_INFO "HFC-USB: setting channel %d to mode %d\n",channel,mode);
-+#endif
-+
-+ hfc->b_mode[channel]=mode;
-+
-+ // setup CON_HDLC
-+ val=0;
-+ if(mode!=L1_MODE_NULL) val=8; // enable fifo?
-+ if(mode==L1_MODE_TRANS) val|=2; // set transparent bit
-+
-+ queue_control_request(hfc,HFCUSB_FIFO,idx_table[channel],1); // set FIFO to transmit register
-+ queue_control_request(hfc,HFCUSB_CON_HDLC,val,1);
-+ queue_control_request(hfc,HFCUSB_INC_RES_F,2,1); // reset fifo
-+
-+ queue_control_request(hfc,HFCUSB_FIFO,idx_table[channel]+1,1); // set FIFO to receive register
-+ queue_control_request(hfc,HFCUSB_CON_HDLC,val,1);
-+ queue_control_request(hfc,HFCUSB_INC_RES_F,2,1); // reset fifo
-+
-+ val=0x40;
-+ if(hfc->b_mode[0]) val|=1;
-+ if(hfc->b_mode[1]) val|=2;
-+ queue_control_request(hfc,HFCUSB_SCTRL,val,1);
-+
-+ val=0;
-+ if(hfc->b_mode[0]) val|=1;
-+ if(hfc->b_mode[1]) val|=2;
-+ queue_control_request(hfc,HFCUSB_SCTRL_R,val,1);
-+
-+ if(mode==L1_MODE_NULL)
-+ {
-+ if(channel) handle_led(hfc,LED_B2_OFF);
-+ else handle_led(hfc,LED_B1_OFF);
- }
--} /* ctrl_complete */
-+ else
-+ {
-+ if(channel) handle_led(hfc,LED_B2_ON);
-+ else handle_led(hfc,LED_B1_ON);
-+ }
-+}
-
--/*****************************************/
--/* Layer 1 + D channel access from HiSax */
--/*****************************************/
--static void
--hfcusb_l1_access(void *drvarg, int pr, void *arg)
--{
-- hfcusb_data *hfc = (hfcusb_data *) drvarg;
--
-- switch (pr) {
-- case (PH_DATA | REQUEST):
-- case (PH_PULL | INDICATION):
-- skb_queue_tail(hfc->regd.dsq,
-- (struct sk_buff *) arg);
-- if (!hfc->fifos[HFCUSB_D_TX].active
-- && !hfc->dfifo_fill) {
-- fill_tx_urb(hfc->fifos + HFCUSB_D_TX);
-- hfc->active_fifos |=
-- hfc->fifos[HFCUSB_D_TX].fifo_mask;
-- usb_submit_urb(&hfc->fifos[HFCUSB_D_TX].
-- urb);
-- }
-- break;
-- case (PH_ACTIVATE | REQUEST):
-- switch (hfc->l1_state) {
-- case 6:
-- case 8:
-- hfc->regd.dch_l1l2(hfc->regd.arg_hisax,
-- (PH_DEACTIVATE |
-- INDICATION), NULL);
-+/*
-+ --------------------------------------------------------------------------------------
-+ from here : hisax_if callback routines :
-+ - void hfc_usb_d_l2l1(struct hisax_if *hisax_d_if, int pr, void *arg) {
-
-- break;
-- case 7:
-- hfc->regd.dch_l1l2(hfc->regd.arg_hisax,
-- (PH_ACTIVATE |
-- INDICATION), NULL);
-+ l1 to l2 routines :
-+ - static void hfc_usb_l1l2(hfcusb_data * hfc)
-
-- break;
-- default:
-- queue_control_request(hfc, HFCUSB_STATES, 0x60); /* start activation */
-- hfc->t3_timer.expires =
-- jiffies + (HFC_TIMER_T3 * HZ) / 1000;
-- if (!timer_pending(&hfc->t3_timer))
-- add_timer(&hfc->t3_timer);
-- break;
-- }
-- break;
-+*/
-
-- case (PH_DEACTIVATE | REQUEST):
-- queue_control_request(hfc, HFCUSB_STATES, 0x40); /* start deactivation */
-- break;
-- default:
-- printk(KERN_INFO "unknown hfcusb l1_access 0x%x\n",
-- pr);
-- break;
-- }
--} /* hfcusb_l1_access */
--
--/*******************************/
--/* B channel access from HiSax */
--/*******************************/
--static void
--hfcusb_bch_access(void *drvarg, int chan, int pr, void *arg)
--{
-- hfcusb_data *hfc = (hfcusb_data *) drvarg;
-- usb_fifo *fifo = hfc->fifos + (chan ? HFCUSB_B2_TX : HFCUSB_B1_TX);
-- long flags;
--
-- switch (pr) {
-- case (PH_DATA | REQUEST):
-- case (PH_PULL | INDICATION):
-- save_flags(flags);
-- cli();
-- if (!fifo->active) {
-- fill_tx_urb(fifo);
-- hfc->active_fifos |= fifo->fifo_mask;
-- usb_submit_urb(&fifo->urb);
-- }
-- restore_flags(flags);
-- break;
-- case (PH_ACTIVATE | REQUEST):
-- if (!((int) arg)) {
-- hfc->bch_enables &= ~(1 << chan);
-- if (fifo->active) {
-- fifo->active = 0;
-- usb_unlink_urb(&fifo->urb);
-+void hfc_usb_l2l1(struct hisax_if *my_hisax_if, int pr, void *arg)
-+{
-+ usb_fifo *fifo = my_hisax_if->priv;
-+ hfcusb_data *hfc = fifo->hfc;
-+
-+ switch (pr) {
-+ case PH_ACTIVATE | REQUEST:
-+ if(fifo->fifonum==HFCUSB_D_TX)
-+ {
-+#ifdef VERBOSE_ISDN_DEBUG
-+ printk (KERN_INFO "HFC_USB: hfc_usb_d_l2l1 D-chan: PH_ACTIVATE | REQUEST\n");
-+#endif
-+ queue_control_request(hfc, HFCUSB_STATES,0x60,1); /* make activation */
-+ hfc->t3_timer.expires = jiffies + (HFC_TIMER_T3 * HZ) / 1000;
-+ if(!timer_pending(&hfc->t3_timer)) add_timer(&hfc->t3_timer);
- }
-- save_flags(flags);
-- cli();
-- queue_control_request(hfc, HFCUSB_FIFO,
-- fifo->fifonum);
-- queue_control_request(hfc,
-- HFCUSB_INC_RES_F, 2);
-- queue_control_request(hfc, HFCUSB_CON_HDLC,
-- 9);
-- queue_control_request(hfc, HFCUSB_SCTRL,
-- 0x40 +
-- hfc->bch_enables);
-- queue_control_request(hfc, HFCUSB_SCTRL_R,
-- hfc->bch_enables);
-- restore_flags(flags);
-- fifo++;
-- if (fifo->active) {
-- fifo->active = 0;
-- usb_unlink_urb(&fifo->urb);
-+ else
-+ {
-+#ifdef VERBOSE_ISDN_DEBUG
-+ printk (KERN_INFO "HFC_USB: hfc_usb_d_l2l1 Bx-chan: PH_ACTIVATE | REQUEST\n");
-+#endif
-+ set_hfcmode(hfc,(fifo->fifonum==HFCUSB_B1_TX) ? 0 : 1 ,(int)arg);
-+ fifo->hif->l1l2(fifo->hif,PH_ACTIVATE | INDICATION, NULL);
- }
-- return; /* fifo deactivated */
-- }
-- fifo->transmode = ((int) arg == L1_MODE_TRANS);
-- fifo->max_size =
-- ((fifo->transmode) ? fifo->
-- usb_maxlen : MAX_BCH_SIZE);
-- (fifo + 1)->transmode = fifo->transmode;
-- (fifo + 1)->max_size = fifo->max_size;
-- hfc->bch_enables |= (1 << chan);
-- save_flags(flags);
-- cli();
-- queue_control_request(hfc, HFCUSB_FIFO,
-- fifo->fifonum);
-- queue_control_request(hfc, HFCUSB_CON_HDLC,
-- ((!fifo->
-- transmode) ? 9 : 11));
-- queue_control_request(hfc, HFCUSB_INC_RES_F, 2);
-- queue_control_request(hfc, HFCUSB_SCTRL,
-- 0x40 + hfc->bch_enables);
-- if ((int) arg == L1_MODE_HDLC)
-- queue_control_request(hfc, HFCUSB_CON_HDLC,
-- 8);
-- queue_control_request(hfc, HFCUSB_FIFO,
-- fifo->fifonum + 1);
-- queue_control_request(hfc, HFCUSB_CON_HDLC,
-- ((!fifo->
-- transmode) ? 8 : 10));
-- queue_control_request(hfc, HFCUSB_INC_RES_F, 2);
-- queue_control_request(hfc, HFCUSB_SCTRL_R,
-- hfc->bch_enables);
-- restore_flags(flags);
--
-- break;
--
-- default:
-- printk(KERN_INFO
-- "unknown hfcusb bch_access chan %d 0x%x\n",
-- chan, pr);
-- break;
-- }
--} /* hfcusb_bch_access */
-+ break;
-+ case PH_DEACTIVATE | REQUEST:
-+ if(fifo->fifonum==HFCUSB_D_TX)
-+ {
-+#ifdef VERBOSE_ISDN_DEBUG
-+ printk (KERN_INFO "HFC_USB: hfc_usb_d_l2l1 D-chan: PH_DEACTIVATE | REQUEST\n");
-+#endif
-+ printk (KERN_INFO "HFC-USB: ISDN TE device should not deativate...\n");
-+ }
-+ else
-+ {
-+#ifdef VERBOSE_ISDN_DEBUG
-+ printk (KERN_INFO "HFC_USB: hfc_usb_d_l2l1 Bx-chan: PH_DEACTIVATE | REQUEST\n");
-+#endif
-+ set_hfcmode(hfc,(fifo->fifonum==HFCUSB_B1_TX) ? 0 : 1 ,(int)L1_MODE_NULL);
-+ fifo->hif->l1l2(fifo->hif,PH_DEACTIVATE | INDICATION, NULL);
-+ }
-+ break;
-+ case PH_DATA | REQUEST:
-+ if(fifo->skbuff && fifo->delete_flg)
-+ {
-+ dev_kfree_skb_any(fifo->skbuff);
-+ //printk(KERN_INFO "skbuff=NULL on fifo:%d\n",fifo->fifonum);
-+ fifo->skbuff = NULL;
-+ fifo->delete_flg=FALSE;
-+ }
-+
-+ fifo->skbuff=arg; // we have a new buffer
-+
-+ //if(fifo->fifonum==HFCUSB_D_TX) printk (KERN_INFO "HFC_USB: hfc_usb_d_l2l1 D-chan: PH_DATA | REQUEST\n");
-+ //else printk (KERN_INFO "HFC_USB: hfc_usb_d_l2l1 Bx-chan: PH_DATA | REQUEST\n");
-+ break;
-+ default:
-+ printk (KERN_INFO "HFC_USB: hfc_usb_d_l2l1: unkown state : %#x\n", pr);
-+ break;
-+ }
-+}
-+
-+// valid configurations
-+#define CNF_4INT3ISO 1 // 4 INT IN, 3 ISO OUT
-+#define CNF_3INT3ISO 2 // 3 INT IN, 3 ISO OUT
-+#define CNF_4ISO3ISO 3 // 4 ISO IN, 3 ISO OUT
-+#define CNF_3ISO3ISO 4 // 3 ISO IN, 3 ISO OUT
-+
-+
-+/*
-+ --------------------------------------------------------------------------------------
-+ From here on USB initialization and deactivation related routines are implemented :
-+
-+ - hfc_usb_init :
-+ is the main Entry Point for the USB Subsystem when the device get plugged
-+ in. This function calls usb_register with usb_driver as parameter.
-+ Here, further entry points for probing (hfc_usb_probe) and disconnecting
-+ the device (hfc_usb_disconnect) are published, as the id_table
-+
-+ - hfc_usb_probe
-+ this function is called by the usb subsystem, and steps through the alternate
-+ settings of the currently plugged in device to detect all Endpoints needed to
-+ run an ISDN TA.
-+ Needed EndPoints are
-+ 3 (+1) IntIn EndPoints (D-in, E-in, B1-in, B2-in, (E-in)) or
-+ 3 (+1) Isochron In Endpoints (D-out, B1-out, B2-out) and 3 IsoOut Endpoints
-+ The currently used transfer mode of on the Out-Endpoints will be stored in
-+ hfc->usb_transfer_mode and is either USB_INT or USB_ISO
-+ When a valid alternate setting could be found, the usb_init (see blow)
-+ function is called
-+
-+ - usb_init
-+ Here, the HFC_USB Chip itself gets initialized and the USB framework to send/receive
-+ Data to/from the several EndPoints are initialized:
-+ The E- and D-Channel Int-In chain gets started
-+ The IsoChain for the Iso-Out traffic get started
-+
-+ - hfc_usb_disconnect
-+ this function is called by the usb subsystem and has to free all resources
-+ and stop all usb traffic to allow a proper hotplugging disconnect.
-+
-+*/
-
- /***************************************************************************/
- /* usb_init is called once when a new matching device is detected to setup */
--/* main parmeters. It registers the driver at the main hisax module. */
-+/* main parameters. It registers the driver at the main hisax module. */
- /* on success 0 is returned. */
- /***************************************************************************/
--static int
--usb_init(hfcusb_data * hfc)
-+static int usb_init(hfcusb_data * hfc)
- {
- usb_fifo *fifo;
-- int i;
-+ int i, err;
- u_char b;
--
-+ struct hisax_b_if *p_b_if[2];
-+
- /* check the chip id */
-- if ((Read_hfc(hfc, HFCUSB_CHIP_ID, &b) != 1) ||
-- (b != HFCUSB_CHIPID)) {
-+ printk(KERN_INFO "HFCUSB_CHIP_ID begin\n");
-+ if (read_usb(hfc, HFCUSB_CHIP_ID, &b) != 1) {
-+ printk(KERN_INFO "HFC-USB: cannot read chip id\n");
-+ return(1);
-+ }
-+ printk(KERN_INFO "HFCUSB_CHIP_ID %x\n", b);
-+ if (b != HFCUSB_CHIPID) {
- printk(KERN_INFO "HFC-USB: Invalid chip id 0x%02x\n", b);
-- return (1);
-+ return(1);
- }
-
- /* first set the needed config, interface and alternate */
-- usb_set_configuration(hfc->dev, 1);
-- usb_set_interface(hfc->dev, hfc->if_used, hfc->alt_used);
-+ printk(KERN_INFO "usb_init 1\n");
-+// usb_set_configuration(hfc->dev, 1);
-+ printk(KERN_INFO "usb_init 2\n");
-+ err = usb_set_interface(hfc->dev, hfc->if_used, hfc->alt_used);
-+ printk(KERN_INFO "usb_init usb_set_interface return %d\n", err);
-+ /* now we initialize the chip */
-+ write_usb(hfc, HFCUSB_CIRM, 8); // do reset
-+ write_usb(hfc, HFCUSB_CIRM, 0x10); // aux = output, reset off
-
-- /* init the led state request */
-- hfc->led_req = LED_DRIVER;
-+ // set USB_SIZE to match the the wMaxPacketSize for INT or BULK transfers
-+ write_usb(hfc, HFCUSB_USB_SIZE,(hfc->packet_size/8) | ((hfc->packet_size/8) << 4));
-
-- /* now we initialise the chip */
-- Write_hfc(hfc, HFCUSB_CIRM, 0x10); /* aux = output, reset off */
-- Write_hfc(hfc, HFCUSB_P_DATA, 0); /* leds = off */
-- Write_hfc(hfc, HFCUSB_USB_SIZE,
-- (hfc->fifos[HFCUSB_B1_TX].usb_maxlen >> 3) |
-- ((hfc->fifos[HFCUSB_B1_RX].usb_maxlen >> 3) << 4));
-+ // set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers
-+ write_usb(hfc, HFCUSB_USB_SIZE_I, hfc->iso_packet_size);
-
- /* enable PCM/GCI master mode */
-- Write_hfc(hfc, HFCUSB_MST_MODE1, 0); /* set default values */
-- Write_hfc(hfc, HFCUSB_MST_MODE0, 1); /* enable master mode */
-+ write_usb(hfc, HFCUSB_MST_MODE1, 0); /* set default values */
-+ write_usb(hfc, HFCUSB_MST_MODE0, 1); /* enable master mode */
-
- /* init the fifos */
-- Write_hfc(hfc, HFCUSB_F_THRES, (HFCUSB_TX_THRESHOLD >> 3) |
-- ((HFCUSB_RX_THRESHOLD >> 3) << 4));
-+ write_usb(hfc, HFCUSB_F_THRES, (HFCUSB_TX_THRESHOLD/8) |((HFCUSB_RX_THRESHOLD/8) << 4));
-
-- for (i = 0, fifo = hfc->fifos + i; i < HFCUSB_NUM_FIFOS;
-- i++, fifo++) {
-- Write_hfc(hfc, HFCUSB_FIFO, i); /* select the desired fifo */
--
-- fifo->transmode = 0; /* hdlc mode selected */
-- fifo->buff = NULL; /* init buffer pointer */
-- fifo->max_size =
-- (i <= HFCUSB_B2_RX) ? MAX_BCH_SIZE : MAX_DFRAME_LEN;
-- Write_hfc(hfc, HFCUSB_HDLC_PAR, ((i <= HFCUSB_B2_RX) ? 0 : 2)); /* data length */
-- Write_hfc(hfc, HFCUSB_CON_HDLC, ((i & 1) ? 0x08 : 0x09)); /* rx hdlc, tx fill 1 */
-- Write_hfc(hfc, HFCUSB_INC_RES_F, 2); /* reset the fifo */
-- }
--
-- Write_hfc(hfc, HFCUSB_CLKDEL, 0x0f); /* clock delay value */
-- Write_hfc(hfc, HFCUSB_STATES, 3 | 0x10); /* set deactivated mode */
-- Write_hfc(hfc, HFCUSB_STATES, 3); /* enable state machine */
-+ fifo = hfc->fifos;
-+ for(i = 0; i < HFCUSB_NUM_FIFOS; i++)
-+ {
-+ write_usb(hfc, HFCUSB_FIFO, i); /* select the desired fifo */
-+ fifo[i].skbuff = NULL; /* init buffer pointer */
-+ fifo[i].max_size = (i <= HFCUSB_B2_RX) ? MAX_BCH_SIZE : MAX_DFRAME_LEN;
-+ fifo[i].last_urblen=0;
-+ write_usb(hfc, HFCUSB_HDLC_PAR, ((i <= HFCUSB_B2_RX) ? 0 : 2)); // set 2 bit for D- & E-channel
-+ write_usb(hfc, HFCUSB_CON_HDLC, ((i==HFCUSB_D_TX) ? 0x09 : 0x08)); // rx hdlc, enable IFF for D-channel
-+ write_usb(hfc, HFCUSB_INC_RES_F, 2); /* reset the fifo */
-+ }
-
-- Write_hfc(hfc, HFCUSB_SCTRL_R, 0); /* disable both B receivers */
-- Write_hfc(hfc, HFCUSB_SCTRL, 0x40); /* disable B transmitters + cap mode */
-+ write_usb(hfc, HFCUSB_CLKDEL, 0x0f); /* clock delay value */
-+ write_usb(hfc, HFCUSB_STATES, 3 | 0x10); /* set deactivated mode */
-+ write_usb(hfc, HFCUSB_STATES, 3); /* enable state machine */
-+
-+ write_usb(hfc, HFCUSB_SCTRL_R, 0); /* disable both B receivers */
-+ write_usb(hfc, HFCUSB_SCTRL, 0x40); /* disable B transmitters + capacitive mode */
-+
-+ // set both B-channel to not connected
-+ hfc->b_mode[0]=L1_MODE_NULL;
-+ hfc->b_mode[1]=L1_MODE_NULL;
-+
-+ hfc->l1_activated=FALSE;
-+ hfc->led_state=0;
-+ hfc->led_new_data=0;
-
-- /* init the l1 timer */
-+ /* init the t3 timer */
- init_timer(&hfc->t3_timer);
- hfc->t3_timer.data = (long) hfc;
-- hfc->t3_timer.function = (void *) l1_timer_expire;
-+ hfc->t3_timer.function = (void *) l1_timer_expire_t3;
-+ /* init the t4 timer */
-+ init_timer(&hfc->t4_timer);
- hfc->t4_timer.data = (long) hfc;
-- hfc->t4_timer.function = (void *) l1_timer_expire;
-- hfc->l1_tq.routine = (void *) (void *) usb_l1d_bh;
-- hfc->l1_tq.sync = 0;
-- hfc->l1_tq.data = hfc;
--
-- /* init the background control machinery */
-- hfc->ctrl_read.requesttype = 0xc0;
-- hfc->ctrl_read.request = 1;
-- hfc->ctrl_read.length = 1;
-- hfc->ctrl_write.requesttype = 0x40;
-- hfc->ctrl_write.request = 0;
-- hfc->ctrl_write.length = 0;
-- FILL_CONTROL_URB(&hfc->ctrl_urb, hfc->dev, hfc->ctrl_out_pipe,
-- (u_char *) & hfc->ctrl_write, NULL, 0,
-- ctrl_complete, hfc);
--
-- /* init the TX-urbs */
-- fifo = hfc->fifos + HFCUSB_D_TX;
-- FILL_BULK_URB(&fifo->urb, hfc->dev, fifo->pipe,
-- (u_char *) fifo->buffer, 0, tx_complete, fifo);
-- fifo = hfc->fifos + HFCUSB_B1_TX;
-- FILL_BULK_URB(&fifo->urb, hfc->dev, fifo->pipe,
-- (u_char *) fifo->buffer, 0, tx_complete, fifo);
-- fifo = hfc->fifos + HFCUSB_B2_TX;
-- FILL_BULK_URB(&fifo->urb, hfc->dev, fifo->pipe,
-- (u_char *) fifo->buffer, 0, tx_complete, fifo);
--
-- /* init the E-buffer */
-- skb_queue_head_init(&hfc->regd.erq);
--
-- /* now register ourself at hisax */
-- hfc->regd.version = HISAX_LOAD_VERSION; /* set our version */
-- hfc->regd.cmd = HISAX_LOAD_REGISTER; /* register command */
-- hfc->regd.argl1 = (void *) hfc; /* argument for our local routine */
-- hfc->regd.dch_l2l1 = hfcusb_l1_access;
-- hfc->regd.bch_l2l1 = hfcusb_bch_access;
-- hfc->regd.drvname = "hfc_usb";
-- if (hisax_register_hfcusb(&hfc->regd)) {
-- printk(KERN_INFO "HFC-USB failed to register at hisax\n");
-- Write_hfc(hfc, HFCUSB_CIRM, 0x08); /* aux = input, reset on */
-- return (1);
-- }
--
-- /* startup the D- and E-channel fifos */
-- start_rx_fifo(hfc->fifos + HFCUSB_D_RX); /* D-fifo */
-- if (hfc->fifos[HFCUSB_PCM_RX].pipe)
-- start_rx_fifo(hfc->fifos + HFCUSB_PCM_RX); /* E-fifo */
-+ hfc->t4_timer.function = (void *) l1_timer_expire_t4;
-+ /* init the led timer */
-+ init_timer(&hfc->led_timer);
-+ hfc->led_timer.data = (long) hfc;
-+ hfc->led_timer.function = (void *) led_timer;
-+ // trigger 4 hz led timer
-+ hfc->led_timer.expires = jiffies + (LED_TIME * HZ) / 1000;
-+ if(!timer_pending(&hfc->led_timer)) add_timer(&hfc->led_timer);
-+
-+ // init the background machinery for control requests
-+ hfc->ctrl_read.bRequestType = 0xc0;
-+ hfc->ctrl_read.bRequest = 1;
-+ hfc->ctrl_read.wLength = 1;
-+ hfc->ctrl_write.bRequestType = 0x40;
-+ hfc->ctrl_write.bRequest = 0;
-+ hfc->ctrl_write.wLength = 0;
-+ usb_fill_control_urb(hfc->ctrl_urb, hfc->dev, hfc->ctrl_out_pipe,(u_char *) & hfc->ctrl_write, NULL, 0, ctrl_complete, hfc);
-+
-+ /* Init All Fifos */
-+ for(i = 0; i < HFCUSB_NUM_FIFOS; i++)
-+ {
-+ hfc->fifos[i].iso[0].purb = NULL;
-+ hfc->fifos[i].iso[1].purb = NULL;
-+ hfc->fifos[i].active = 0;
-+ }
-+
-+ // register like Germaschewski :
-+ hfc->d_if.owner = THIS_MODULE;
-+ hfc->d_if.ifc.priv = &hfc->fifos[HFCUSB_D_TX];
-+ hfc->d_if.ifc.l2l1 = hfc_usb_l2l1;
-+
-+ for (i=0; i<2; i++)
-+ {
-+ hfc->b_if[i].ifc.priv = &hfc->fifos[HFCUSB_B1_TX+i*2];
-+ hfc->b_if[i].ifc.l2l1 = hfc_usb_l2l1;
-+ p_b_if[i] = &hfc->b_if[i];
-+ }
-+
-+ hfc->protocol = 2; /* default EURO ISDN, should be a module_param */
-+ hisax_register(&hfc->d_if, p_b_if, "hfc_usb", hfc->protocol);
-+
-+ for (i=0; i<4; i++)
-+ hfc->fifos[i].hif=&p_b_if[i/2]->ifc;
-+ for (i=4; i<8; i++)
-+ hfc->fifos[i].hif=&hfc->d_if.ifc;
-+
-+ // 3 (+1) INT IN + 3 ISO OUT
-+ if(hfc->cfg_used == CNF_3INT3ISO || hfc->cfg_used == CNF_4INT3ISO)
-+ {
-+ start_int_fifo(hfc->fifos + HFCUSB_D_RX); // Int IN D-fifo
-+ if(hfc->fifos[HFCUSB_PCM_RX].pipe) start_int_fifo(hfc->fifos + HFCUSB_PCM_RX); // E-fifo
-+ start_int_fifo(hfc->fifos + HFCUSB_B1_RX); // Int IN B1-fifo
-+ start_int_fifo(hfc->fifos + HFCUSB_B2_RX); // Int IN B2-fifo
-+ }
-+
-+ // 3 (+1) ISO IN + 3 ISO OUT
-+ if(hfc->cfg_used==CNF_3ISO3ISO || hfc->cfg_used==CNF_4ISO3ISO)
-+ {
-+ start_isoc_chain(hfc->fifos + HFCUSB_D_RX, ISOC_PACKETS_D, rx_iso_complete,16);
-+ if(hfc->fifos[HFCUSB_PCM_RX].pipe) start_isoc_chain(hfc->fifos + HFCUSB_PCM_RX, ISOC_PACKETS_D, rx_iso_complete,16);
-+ start_isoc_chain(hfc->fifos + HFCUSB_B1_RX, ISOC_PACKETS_B, rx_iso_complete,16);
-+ start_isoc_chain(hfc->fifos + HFCUSB_B2_RX, ISOC_PACKETS_B, rx_iso_complete,16);
-+ }
-+
-+ start_isoc_chain(hfc->fifos + HFCUSB_D_TX, ISOC_PACKETS_D, tx_iso_complete,1);
-+ start_isoc_chain(hfc->fifos + HFCUSB_B1_TX, ISOC_PACKETS_B, tx_iso_complete,1);
-+ start_isoc_chain(hfc->fifos + HFCUSB_B2_TX, ISOC_PACKETS_B, tx_iso_complete,1);
-+
-+ handle_led(hfc,LED_POWER_ON);
-+
-+ return(0);
-+} /* usb_init */
-+
-+
-+/****************************************/
-+/* data defining the devices to be used */
-+/****************************************/
-+// static __devinitdata const struct usb_device_id hfc_usb_idtab[3] = {
-+static struct usb_device_id hfc_usb_idtab[] = {
-+ {USB_DEVICE(0x7b0, 0x0007)}, /* Billion USB TA 2 */
-+ {USB_DEVICE(0x742, 0x2008)}, /* Stollmann USB TA */
-+ {USB_DEVICE(0x959, 0x2bd0)}, /* Colognechip USB eval TA */
-+ {USB_DEVICE(0x8e3, 0x0301)}, /* OliTec ISDN USB */
-+ {USB_DEVICE(0x675, 0x1688)}, /* DrayTec ISDN USB */
-+ {USB_DEVICE(0x7fa, 0x0846)}, /* Bewan ISDN USB TA */
-+ {} /* end with an all-zeroes entry */
-+};
-+
-+MODULE_AUTHOR("Peter Sprenger (sprenger@moving-byters.de)/Martin Bachem (info@colognechip.com)");
-+MODULE_DESCRIPTION("HFC I4L USB driver");
-+MODULE_DEVICE_TABLE(usb, hfc_usb_idtab);
-+MODULE_LICENSE("GPL");
-+
-+#define EP_NUL 1 // Endpoint at this position not allowed
-+#define EP_NOP 2 // all type of endpoints allowed at this position
-+#define EP_ISO 3 // Isochron endpoint mandatory at this position
-+#define EP_BLK 4 // Bulk endpoint mandatory at this position
-+#define EP_INT 5 // Interrupt endpoint mandatory at this position
-+
-+// this array represents all endpoints possible in the HCF-USB
-+// the last 2 entries are the configuration number and the minimum interval for Interrupt endpoints
-+int validconf[][18]=
-+{
-+ // INT in, ISO out config
-+ {EP_NUL,EP_INT,EP_NUL,EP_INT,EP_NUL,EP_INT,EP_NOP,EP_INT,EP_ISO,EP_NUL,EP_ISO,EP_NUL,EP_ISO,EP_NUL,EP_NUL,EP_NUL,CNF_4INT3ISO,2},
-+ {EP_NUL,EP_INT,EP_NUL,EP_INT,EP_NUL,EP_INT,EP_NUL,EP_NUL,EP_ISO,EP_NUL,EP_ISO,EP_NUL,EP_ISO,EP_NUL,EP_NUL,EP_NUL,CNF_3INT3ISO,2},
-+ // ISO in, ISO out config
-+ {EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_ISO,EP_ISO,EP_ISO,EP_ISO,EP_ISO,EP_ISO,EP_NOP,EP_ISO,CNF_4ISO3ISO,2},
-+ {EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_NUL,EP_ISO,EP_ISO,EP_ISO,EP_ISO,EP_ISO,EP_ISO,EP_NUL,EP_NUL,CNF_3ISO3ISO,2},
-+ {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0} // EOL element
-+};
-+
-+// string description of chosen config
-+char *conf_str[]=
-+{
-+ "4 Interrupt IN + 3 Isochron OUT",
-+ "3 Interrupt IN + 3 Isochron OUT",
-+ "4 Isochron IN + 3 Isochron OUT",
-+ "3 Isochron IN + 3 Isochron OUT"
-+};
-
-- return (0);
--} /* usb_init */
-
- /*************************************************/
- /* function called to probe a new plugged device */
- /*************************************************/
--static void *
--hfc_usb_probe(struct usb_device *dev, unsigned int interface
--#ifdef COMPAT_HAS_USB_IDTAB
-- , const struct usb_device_id *id_table)
--#else
-- )
--#endif
-+//static int hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
-+static void* hfc_usb_probe(struct usb_device *dev, unsigned int ifnum, const struct usb_device_id *id)
- {
-+ //struct usb_device *dev= interface_to_usbdev(intf);
-+ struct usb_interface* intf = dev->actconfig->interface + ifnum;
- hfcusb_data *context;
-- struct usb_interface *ifp = dev->actconfig->interface + interface;
-- struct usb_interface_descriptor *ifdp =
-- ifp->altsetting + ifp->act_altsetting;
-- struct usb_endpoint_descriptor *epd;
-- int i, idx, ep_msk;
--
--#ifdef COMPAT_HAS_USB_IDTAB
-- if (id_table && (dev->descriptor.idVendor == id_table->idVendor) &&
-- (dev->descriptor.idProduct == id_table->idProduct) &&
--#else
-- if ((((dev->descriptor.idVendor == 0x959) &&
-- (dev->descriptor.idProduct == 0x2bd0)) ||
-- ((dev->descriptor.idVendor == 0x7b0) &&
-- (dev->descriptor.idProduct == 0x0006))) &&
--#endif
-- (ifdp->bNumEndpoints >= 6) && (ifdp->bNumEndpoints <= 16)) {
-- if (!(context = kmalloc(sizeof(hfcusb_data), GFP_KERNEL))) {
-- return (NULL); /* got no mem */
-- };
-- memset(context, 0, sizeof(hfcusb_data)); /* clear the structure */
-- i = ifdp->bNumEndpoints; /* get number of endpoints */
-- ep_msk = 0; /* none found */
-- epd = ifdp->endpoint; /* first endpoint descriptor */
-- while (i-- && ((ep_msk & 0xcf) != 0xcf)) {
--
-- idx = (((epd->bEndpointAddress & 0x7f) - 1) << 1); /* get endpoint base */
-- if (idx < 7) {
-- switch (epd->bmAttributes) {
-- case USB_ENDPOINT_XFER_INT:
-- if (!
-- (epd->
-- bEndpointAddress &
-- 0x80))
-- break; /* only interrupt in allowed */
-- idx++; /* input index is odd */
-- context->fifos[idx].pipe =
-- usb_rcvintpipe(dev,
-- epd->
-- bEndpointAddress);
-- break;
--
-- case USB_ENDPOINT_XFER_BULK:
-- if (epd->
-- bEndpointAddress &
-- 0x80)
-- break; /* only bulk out allowed */
-- context->fifos[idx].pipe =
-- usb_sndbulkpipe(dev,
-- epd->
-- bEndpointAddress);
-- break;
-- default:
-- context->fifos[idx].pipe = 0; /* reset data */
-- } /* switch attribute */
--
-- if (context->fifos[idx].pipe) {
-- context->fifos[idx].fifonum = idx;
-- context->fifos[idx].fifo_mask =
-- 1 << idx;
-- context->fifos[idx].hfc = context;
-- context->fifos[idx].usb_maxlen =
-- epd->wMaxPacketSize;
-- context->fifos[idx].intervall =
-- epd->bInterval;
-- ep_msk |= (1 << idx);
-- } else
-- ep_msk &= ~(1 << idx);
-- } /* idx < 7 */
-- epd++;
-- }
-+ //struct usb_host_interface *iface = intf->cur_altsetting;
-+ //struct usb_host_interface *iface_used = NULL;
-+ //struct usb_host_endpoint *ep;
-+ struct usb_endpoint_descriptor* ep;
-+ //int ifnum = iface->desc.bInterfaceNumber;
-+ struct usb_interface_descriptor* intfdesc = intf->altsetting + intf->act_altsetting;
-+ struct usb_interface_descriptor* intfdesc_used = NULL;
-+ int i, idx, alt_idx, probe_alt_setting, vend_idx, cfg_used, *vcf, attr, cfg_found, cidx, ep_addr;
-+ int cmptbl[16],small_match,iso_packet_size,packet_size,alt_used=0;
-+
-+// usb_show_device(dev);
-+// usb_show_device_descriptor(&dev->descriptor);
-+// usb_show_interface_descriptor(&iface->desc);
-+ vend_idx=0xffff;
-+ for(i=0;vdata[i].vendor;i++)
-+ {
-+ if(dev->descriptor.idVendor==vdata[i].vendor && dev->descriptor.idProduct==vdata[i].prod_id) vend_idx=i;
-+ }
-+
-
-- if ((ep_msk & 0x3f) != 0x3f) {
-- kfree(context);
-- return (NULL);
-- }
-- MOD_INC_USE_COUNT; /* lock our module */
-- context->dev = dev; /* save device */
-- context->if_used = interface; /* save used interface */
-- context->alt_used = ifp->act_altsetting; /* and alternate config */
-- context->ctrl_paksize = dev->descriptor.bMaxPacketSize0; /* control size */
--
-- /* create the control pipes needed for register access */
-- context->ctrl_in_pipe = usb_rcvctrlpipe(context->dev, 0);
-- context->ctrl_out_pipe = usb_sndctrlpipe(context->dev, 0);
--
-- /* init the chip and register the driver */
-- if (usb_init(context)) {
-- kfree(context);
-- MOD_DEC_USE_COUNT;
-- return (NULL);
-- }
-+#ifdef VERBOSE_USB_DEBUG
-+ printk(KERN_INFO "HFC-USB: probing interface(%d) actalt(%d)\n",
-+ ifnum, intfdesc->bAlternateSetting);
-+ /* printk(KERN_INFO "HFC-USB: probing interface(%d) actalt(%d) minor(%d)\n",
-+ ifnum, intfdesc->bAlternateSetting, intf->driver->minor); */
-+#endif
-
-- printk(KERN_INFO
-- "HFC-USB: New device if=%d alt=%d registered\n",
-- context->if_used, context->alt_used);
-- return (context);
-- }
-+ if (vend_idx != 0xffff) {
-+#ifdef VERBOSE_USB_DEBUG
-+ printk(KERN_INFO "HFC-USB: found vendor idx:%d name:%s\n",vend_idx,vdata[vend_idx].vend_name);
-+#endif
-+ /* if vendor and product ID is OK, start probing a matching alternate setting ... */
-+ alt_idx = 0;
-+ small_match=0xffff;
-+ // default settings
-+ iso_packet_size=16;
-+ packet_size=64;
-+
-+ while (alt_idx < intf->num_altsetting) {
-+ //iface = intf->altsetting + alt_idx;
-+ intfdesc = intf->altsetting + alt_idx;
-+ probe_alt_setting = intfdesc->bAlternateSetting;
-+ cfg_used=0;
-
-- return (NULL); /* no matching entry */
--} /* hfc_usb_probe */
-+#ifdef VERBOSE_USB_DEBUG
-+ printk(KERN_INFO "HFC-USB: test alt_setting %d\n", probe_alt_setting);
-+#endif
-+ // check for config EOL element
-+ while (validconf[cfg_used][0]) {
-+ cfg_found=TRUE;
-+ vcf=validconf[cfg_used];
-+ ep = intfdesc->endpoint; /* first endpoint descriptor */
-+
-+#ifdef VERBOSE_USB_DEBUG
-+ printk(KERN_INFO "HFC-USB: (if=%d alt=%d cfg_used=%d)\n",
-+ ifnum, probe_alt_setting, cfg_used);
-+#endif
-+ // copy table
-+ memcpy(cmptbl,vcf,16*sizeof(int));
-+
-+ // check for all endpoints in this alternate setting
-+ for (i=0; i < intfdesc->bNumEndpoints; i++) {
-+ ep_addr = ep->bEndpointAddress;
-+ idx = ((ep_addr & 0x7f)-1)*2; /* get endpoint base */
-+ if (ep_addr & 0x80)
-+ idx++;
-+ attr = ep->bmAttributes;
-+
-+ if (cmptbl[idx] == EP_NUL) {
-+ printk(KERN_INFO "HFC-USB: cfg_found=FALSE in idx:%d attr:%d cmptbl[%d]:%d\n",
-+ idx, attr, idx, cmptbl[idx]);
-+ cfg_found = FALSE;
-+ }
-+
-+ if (attr == USB_ENDPOINT_XFER_INT && cmptbl[idx] == EP_INT)
-+ cmptbl[idx] = EP_NUL;
-+ if (attr == USB_ENDPOINT_XFER_BULK && cmptbl[idx] == EP_BLK)
-+ cmptbl[idx] = EP_NUL;
-+ if (attr == USB_ENDPOINT_XFER_ISOC && cmptbl[idx] == EP_ISO)
-+ cmptbl[idx] = EP_NUL;
-+
-+ // check if all INT endpoints match minimum interval
-+ if (attr == USB_ENDPOINT_XFER_INT && ep->bInterval < vcf[17]) {
-+#ifdef VERBOSE_USB_DEBUG
-+ if (cfg_found)
-+ printk(KERN_INFO "HFC-USB: Interrupt Endpoint interval < %d found - skipping config\n",
-+ vcf[17]);
-+#endif
-+ cfg_found = FALSE;
-+ }
-+
-+ ep++;
-+ }
-+
-+ for (i = 0; i < 16; i++) {
-+ // printk(KERN_INFO "HFC-USB: cmptbl[%d]:%d\n", i, cmptbl[i]);
-+
-+ // all entries must be EP_NOP or EP_NUL for a valid config
-+ if (cmptbl[i] != EP_NOP && cmptbl[i] != EP_NUL)
-+ cfg_found = FALSE;
-+ }
-+
-+ // we check for smallest match, to provide configuration priority
-+ // configurations with smaller index have higher priority
-+ if (cfg_found) {
-+ if (cfg_used < small_match) {
-+ small_match = cfg_used;
-+ alt_used = probe_alt_setting;
-+ //iface_used = iface;
-+ intfdesc_used = intfdesc;
-+ }
-+#ifdef VERBOSE_USB_DEBUG
-+ printk(KERN_INFO "HFC-USB: small_match=%x %x\n", small_match, alt_used);
-+#endif
-+ }
-+
-+ cfg_used++;
-+ }
-+
-+ alt_idx++;
-+ } /* (alt_idx < intf->num_altsetting) */
-+#ifdef VERBOSE_USB_DEBUG
-+ printk(KERN_INFO "HFC-USB: final small_match=%x alt_used=%x\n",small_match, alt_used);
-+#endif
-+ // yiipiee, we found a valid config
-+ if (small_match != 0xffff) {
-+ //iface = iface_used;
-+ intfdesc = intfdesc_used;
-+
-+ if (!(context = kmalloc(sizeof(hfcusb_data), GFP_KERNEL)))
-+ return(NULL); /* got no mem */
-+ memset(context, 0, sizeof(hfcusb_data)); /* clear the structure */
-+
-+ ep = intfdesc->endpoint; /* first endpoint descriptor */
-+ vcf = validconf[small_match];
-+
-+ for (i = 0; i < intfdesc->bNumEndpoints; i++) {
-+ ep_addr = ep->bEndpointAddress;
-+ idx = ((ep_addr & 0x7f)-1)*2; /* get endpoint base */
-+ if (ep_addr & 0x80)
-+ idx++;
-+ cidx = idx & 7;
-+ attr = ep->bmAttributes;
-+
-+ // only initialize used endpoints
-+ if (vcf[idx] != EP_NOP && vcf[idx] != EP_NUL) {
-+ switch (attr) {
-+ case USB_ENDPOINT_XFER_INT:
-+ context->fifos[cidx].pipe = usb_rcvintpipe(dev, ep->bEndpointAddress);
-+ context->fifos[cidx].usb_transfer_mode = USB_INT;
-+ packet_size = ep->wMaxPacketSize; // remember max packet size
-+#ifdef VERBOSE_USB_DEBUG
-+ printk (KERN_INFO "HFC-USB: Interrupt-In Endpoint found %d ms(idx:%d cidx:%d)!\n",
-+ ep->bInterval, idx, cidx);
-+#endif
-+ break;
-+ case USB_ENDPOINT_XFER_BULK:
-+ if (ep_addr & 0x80)
-+ context->fifos[cidx].pipe = usb_rcvbulkpipe(dev, ep->bEndpointAddress);
-+ else
-+ context->fifos[cidx].pipe = usb_sndbulkpipe(dev, ep->bEndpointAddress);
-+ context->fifos[cidx].usb_transfer_mode = USB_BULK;
-+ packet_size = ep->wMaxPacketSize; // remember max packet size
-+#ifdef VERBOSE_USB_DEBUG
-+ printk (KERN_INFO "HFC-USB: Bulk Endpoint found (idx:%d cidx:%d)!\n",
-+ idx, cidx);
-+#endif
-+ break;
-+ case USB_ENDPOINT_XFER_ISOC:
-+ if (ep_addr & 0x80)
-+ context->fifos[cidx].pipe = usb_rcvisocpipe(dev, ep->bEndpointAddress);
-+ else
-+ context->fifos[cidx].pipe = usb_sndisocpipe(dev, ep->bEndpointAddress);
-+ context->fifos[cidx].usb_transfer_mode = USB_ISOC;
-+ iso_packet_size = ep->wMaxPacketSize; // remember max packet size
-+#ifdef VERBOSE_USB_DEBUG
-+ printk (KERN_INFO "HFC-USB: ISO Endpoint found (idx:%d cidx:%d)!\n",
-+ idx, cidx);
-+#endif
-+ break;
-+ default:
-+ context->fifos[cidx].pipe = 0; /* reset data */
-+ } /* switch attribute */
-+
-+ if (context->fifos[cidx].pipe) {
-+ context->fifos[cidx].fifonum = cidx;
-+ context->fifos[cidx].hfc = context;
-+ context->fifos[cidx].usb_packet_maxlen = ep->wMaxPacketSize;
-+ context->fifos[cidx].intervall = ep->bInterval;
-+ context->fifos[cidx].skbuff = NULL;
-+#ifdef VERBOSE_USB_DEBUG
-+ printk (KERN_INFO "HFC-USB: fifo%d pktlen %d interval %d\n",
-+ context->fifos[cidx].fifonum,
-+ context->fifos[cidx].usb_packet_maxlen,
-+ context->fifos[cidx].intervall);
-+#endif
-+ }
-+ }
-+
-+ ep++;
-+ }
-+
-+ // now share our luck
-+ context->dev = dev; /* save device */
-+ context->if_used = ifnum; /* save used interface */
-+ context->alt_used = alt_used; /* and alternate config */
-+ context->ctrl_paksize = dev->descriptor.bMaxPacketSize0; /* control size */
-+ context->cfg_used=vcf[16]; // store used config
-+ context->vend_idx=vend_idx; // store found vendor
-+ context->packet_size=packet_size;
-+ context->iso_packet_size=iso_packet_size;
-+
-+ /* create the control pipes needed for register access */
-+ context->ctrl_in_pipe = usb_rcvctrlpipe(context->dev, 0);
-+ context->ctrl_out_pipe = usb_sndctrlpipe(context->dev, 0);
-+ context->ctrl_urb = usb_alloc_urb(0);
-+
-+ printk(KERN_INFO "HFC-USB: detected \"%s\" configuration: %s (if=%d alt=%d)\n",
-+ vdata[vend_idx].vend_name, conf_str[small_match], context->if_used, context->alt_used);
-+
-+ /* init the chip and register the driver */
-+ if (usb_init(context))
-+ {
-+ if (context->ctrl_urb) {
-+ usb_unlink_urb(context->ctrl_urb);
-+ usb_free_urb(context->ctrl_urb);
-+ context->ctrl_urb = NULL;
-+ }
-+ kfree(context);
-+ return(NULL);
-+ }
-+ //usb_set_intfdata(intf, context);
-+ //intf->private_data = context;
-+ return(context);
-+ }
-+ }
-+ return(NULL);
-+}
-
- /****************************************************/
- /* function called when an active device is removed */
- /****************************************************/
--static void
--hfc_usb_disconnect(struct usb_device *usbdev, void *drv_context)
-+//static void hfc_usb_disconnect(struct usb_interface *intf)
-+static void hfc_usb_disconnect(struct usb_device *usbdev, void* drv_context)
- {
-- hfcusb_data *context = drv_context;
-+ //hfcusb_data *context = intf->private_data;
-+ hfcusb_data* context = drv_context;
- int i;
-- struct sk_buff *skb;
-
-- /* tell all fifos to terminate */
-- for (i = 0; i < HFCUSB_NUM_FIFOS; i++)
-- if (context->fifos[i].active) {
-- context->fifos[i].active = 0;
-- usb_unlink_urb(&context->fifos[i].urb);
-- }
-- while (context->active_fifos) {
-- set_current_state(TASK_INTERRUPTIBLE);
-- /* Timeout 10ms */
-- schedule_timeout((10 * HZ) / 1000);
-- }
-+ printk(KERN_INFO "HFC-USB: device disconnect\n");
-+
-+ //intf->private_data = NULL;
-+ if (!context)
-+ return;
- if (timer_pending(&context->t3_timer))
- del_timer(&context->t3_timer);
-- context->regd.release_driver(context->regd.arg_hisax);
-- while ((skb = skb_dequeue(&context->regd.erq)) != NULL)
-- dev_kfree_skb_any(skb);
-+ if (timer_pending(&context->t4_timer))
-+ del_timer(&context->t4_timer);
-+ if (timer_pending(&context->led_timer))
-+ del_timer(&context->led_timer);
-+
-+ hisax_unregister(&context->d_if);
-
-+ /* tell all fifos to terminate */
-+ for(i = 0; i < HFCUSB_NUM_FIFOS; i++) {
-+ if(context->fifos[i].usb_transfer_mode == USB_ISOC) {
-+ if(context->fifos[i].active > 0) {
-+ stop_isoc_chain(&context->fifos[i]);
-+#ifdef VERBOSE_USB_DEBUG
-+ printk (KERN_INFO "HFC-USB: hfc_usb_disconnect: stopping ISOC chain Fifo no %i\n", i);
-+#endif
-+ }
-+ } else {
-+ if(context->fifos[i].active > 0) {
-+ context->fifos[i].active = 0;
-+#ifdef VERBOSE_USB_DEBUG
-+ printk (KERN_INFO "HFC-USB: hfc_usb_disconnect: unlinking URB for Fifo no %i\n", i);
-+#endif
-+ }
-+ if (context->fifos[i].urb) {
-+ usb_unlink_urb(context->fifos[i].urb);
-+ usb_free_urb(context->fifos[i].urb);
-+ context->fifos[i].urb = NULL;
-+ }
-+ }
-+ context->fifos[i].active = 0;
-+ }
-+ if (context->ctrl_urb) {
-+ usb_unlink_urb(context->ctrl_urb);
-+ usb_free_urb(context->ctrl_urb);
-+ context->ctrl_urb = NULL;
-+ }
- kfree(context); /* free our structure again */
-- MOD_DEC_USE_COUNT; /* and decrement the usage counter */
- } /* hfc_usb_disconnect */
-
-+
- /************************************/
- /* our driver information structure */
- /************************************/
- static struct usb_driver hfc_drv = {
- name:"hfc_usb",
--#ifdef COMPAT_HAS_USB_IDTAB
- id_table:hfc_usb_idtab,
--#endif
- probe:hfc_usb_probe,
- disconnect:hfc_usb_disconnect,
- };
-
--static void __exit
--hfc_usb_exit(void)
--{
-
-+static void __exit hfc_usb_exit(void)
-+{
-+#ifdef VERBOSE_USB_DEBUG
-+ printk ("HFC-USB: calling \"hfc_usb_exit\" ...\n");
-+#endif
- usb_deregister(&hfc_drv); /* release our driver */
- printk(KERN_INFO "HFC-USB module removed\n");
- }
-
--static int __init
--hfc_usb_init(void)
-+static int __init hfc_usb_init(void)
- {
-- struct hisax_drvreg drv;
-+ printk ("HFC-USB: driver module revision %s loaded\n", hfcusb_revision);
-
-- drv.version = HISAX_LOAD_VERSION; /* set our version */
-- drv.cmd = HISAX_LOAD_CHKVER; /* check command only */
-- if (hisax_register_hfcusb(&drv)) {
-- printk(KERN_INFO "HFC-USB <-> hisax version conflict\n");
-- return (-1); /* unable to register */
-- }
-- if (usb_register(&hfc_drv)) {
-- printk(KERN_INFO
-- "Unable to register HFC-USB module at usb stack\n");
-- return (-1); /* unable to register */
-+ if(usb_register(&hfc_drv))
-+ {
-+ printk(KERN_INFO "HFC-USB: Unable to register HFC-USB module at usb stack\n");
-+ return(-1); /* unable to register */
- }
--
-- printk(KERN_INFO "HFC-USB module loaded\n");
-- return (0);
-+ return(0);
- }
-
-+
-+
-+
-+
- module_init(hfc_usb_init);
- module_exit(hfc_usb_exit);
-+
projects / openwrt / staging / mkresin.git / blobdiff