layerscape: add 64b/32b target for ls1043ardb device

[openwrt/staging/yousong.git] / package / boot / uboot-layerscape / patches / 0005-armv8-set-openwrt-lede-default-boot-env-for-ls1043ar.patch

diff --git a/package/boot/uboot-layerscape/patches/0005-armv8-set-openwrt-lede-default-boot-env-for-ls1043ar.patch b/package/boot/uboot-layerscape/patches/0005-armv8-set-openwrt-lede-default-boot-env-for-ls1043ar.patch
new file mode 100644 (file)
index 0000000..2754859
--- /dev/null
+++ b/package/boot/uboot-layerscape/patches/0005-armv8-set-openwrt-lede-default-boot-env-for-ls1043ar.patch
@@ -0,0 +1,68 @@
+From 3c22f3fcbdb9f919ebdfa87a2ec237ac2abb7e03 Mon Sep 17 00:00:00 2001
+From: Yutang Jiang <yutang.jiang@nxp.com>
+Date: Thu, 27 Oct 2016 23:45:45 +0800
+Subject: [PATCH 05/93] armv8: set openwrt/lede default boot env for
+ ls1043ardb
+
+Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
+---
+ include/configs/ls1043a_common.h |   28 +++++++++++++++++++++++++---
+ 1 file changed, 25 insertions(+), 3 deletions(-)
+
+diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
+index 68678f3..1db05bb 100644
+--- a/include/configs/ls1043a_common.h
++++ b/include/configs/ls1043a_common.h
+@@ -273,6 +273,16 @@
+                       "5m(kernel),1m(dtb),9m(file_system)"
+ #endif
+ 
++#define WRTBOOT_DEFAULT "setenv bootargs root=/dev/mtdblock6 " \
++      "rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 " \
++      "console=ttyS0,115200 mtdparts=60000000.nor:1M(rcw),1M(u-boot)," \
++      "1M(u-boot-env),1M(fman),1M(dtb),5M(kernel),54M(rootfs),64M(otherbank)" \
++      " && cp.b 60400000 $fdtaddr 100000 && cp.b 60500000 $loadaddr 500000" \
++      " && bootm $loadaddr - $fdtaddr"
++#define WRTUPDATE_DEFAULT "tftp a0000000 <tftp_folder>/" \
++      "lede-layerscape-64b-ls1043ardb-squashfs-firmware.bin && protect off all" \
++      " && erase 60000000 +4000000 && cp.b a0000000 60000000 $filesize && reset"
++
+ /* Initial environment variables */
+ #define CONFIG_EXTRA_ENV_SETTINGS             \
+       "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
+@@ -286,6 +296,19 @@
+       "kernel_load=0xa0000000\0"              \
+       "kernel_size=0x2800000\0"               \
+       "console=ttyAMA0,38400n8\0"             \
++      "ethaddr=00:e0:0c:00:77:00\0"   \
++      "eth1addr=00:e0:0c:00:77:01\0"  \
++      "eth2addr=00:e0:0c:00:77:02\0"  \
++      "eth3addr=00:e0:0c:00:77:03\0"  \
++      "eth4addr=00:e0:0c:00:77:04\0"  \
++      "eth5addr=00:e0:0c:00:77:05\0"  \
++      "eth6addr=00:e0:0c:00:77:06\0"  \
++      "ethact=FM1@DTSEC2\0"                   \
++      "loadaddr=82000000\0"                   \
++      "ramdiskaddr=88000000\0"                \
++      "fdtaddr=8f000000\0"                    \
++      "wrtboot=" WRTBOOT_DEFAULT "\0" \
++      "wrtupdate=" WRTUPDATE_DEFAULT "\0"     \
+       "mtdparts=" MTDPARTS_DEFAULT "\0"
+ 
+ #define CONFIG_BOOTARGS                       "console=ttyS0,115200 root=/dev/ram0 " \
+@@ -296,10 +319,9 @@
+ #define CONFIG_BOOTCOMMAND            "sf probe && sf read $kernel_load "    \
+                                       "e0000 f00000 && bootm $kernel_load"
+ #else
+-#define CONFIG_BOOTCOMMAND            "cp.b $kernel_start $kernel_load "     \
+-                                      "$kernel_size && bootm $kernel_load"
++#define CONFIG_BOOTCOMMAND            "run wrtboot"
+ #endif
+-#define CONFIG_BOOTDELAY              10
++#define CONFIG_BOOTDELAY              3
+ 
+ /* Monitor Command Prompt */
+ #define CONFIG_SYS_CBSIZE             512     /* Console I/O Buffer Size */
+-- 
+1.7.9.5
+