--- /dev/null
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Networking Utilities"
+
+config BUSYBOX_CONFIG_FEATURE_IPV6
+ bool "Enable IPv6 support"
+ default y
+ help
+ Enable IPv6 support to busybox. This makes applets that talk IP
+ able to work with IPv6.
+
+config BUSYBOX_CONFIG_ARPING
+ bool "arping"
+ default y
+ help
+ Ping hosts by ARP packets
+
+config BUSYBOX_CONFIG_FTPGET
+ bool "ftpget"
+ default n
+ help
+ Retrieve a remote file via FTP.
+
+config BUSYBOX_CONFIG_FTPPUT
+ bool "ftpput"
+ default n
+ help
+ Store a remote file via FTP.
+
+config BUSYBOX_CONFIG_HOSTNAME
+ bool "hostname"
+ default n
+ help
+ Show or set the system's host name
+
+config BUSYBOX_CONFIG_HTTPD
+ bool "httpd"
+ default y
+ help
+ Serve web pages via an HTTP server.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY
+ bool " Support using httpd only from inetd"
+ default n
+ depends on BUSYBOX_CONFIG_HTTPD
+ help
+ This option disables uid and port options for the httpd applet
+ but requires inetd server daemon.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
+ bool " Enable Basic http Authentication"
+ default y
+ depends on BUSYBOX_CONFIG_HTTPD
+ help
+ Utilizes password settings from /etc/httpd.conf for basic
+ authentication on a per url basis.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5
+ bool " Support MD5 crypted passwords for http Authentication"
+ default y
+ depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
+ help
+ Enables basic per url authentication from /etc/httpd.conf
+ using md5 passwords.
+
+
+if !CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY
+config BUSYBOX_CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP
+ bool " Support reloading the global config file using hup signal"
+ default y
+ depends on BUSYBOX_CONFIG_HTTPD
+ help
+ This option enables processing of SIGHUP to reload cached
+ configuration settings.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID
+ bool " Enable support -u <user> option"
+ default n
+ depends on BUSYBOX_CONFIG_HTTPD
+ help
+ This option allows the server to run as a specific user
+ rather than defaulting to the user that starts the server.
+ Use of this option requires special privileges to change to a
+ different user.
+endif
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES
+ bool " Support loading additional MIME types at run-time"
+ default y
+ depends on BUSYBOX_CONFIG_HTTPD
+ help
+ This option enables support for additional MIME types at
+ run-time to be specified in the configuration file.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
+ bool " Support Common Gateway Interface (CGI)"
+ default y
+ depends on BUSYBOX_CONFIG_HTTPD
+ help
+ This option allows scripts and executables to be invoked
+ when specific urls are requested.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
+ bool " Support the REMOTE_PORT environment variable for CGI"
+ default y
+ depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
+ help
+ Use of this option can assist scripts in generating
+ references that contain a unique port number.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR
+ bool " Enable the -e option for shell script CGI simplification."
+ default y
+ depends on BUSYBOX_CONFIG_HTTPD
+ help
+ After set, this option allows html encoding arbitrary
+ strings for display of the browser. Output goes to stdout.
+ For example, httpd -e "<Hello World>" as
+ "<Hello World>".
+
+config BUSYBOX_CONFIG_IFCONFIG
+ bool "ifconfig"
+ default y
+ help
+ Ifconfig is used to configure the kernel-resident network interfaces.
+
+config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS
+ bool " Enable status reporting output (+7k)"
+ default y
+ depends on BUSYBOX_CONFIG_IFCONFIG
+ help
+ If ifconfig is called with no arguments it will display the status
+ of the currently active interfaces.
+
+config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP
+ bool " Enable slip-specific options \"keepalive\" and \"outfill\""
+ default n
+ depends on BUSYBOX_CONFIG_IFCONFIG
+ help
+ Allow "keepalive" and "outfill" support for SLIP. If you're not
+ planning on using serial lines, leave this unchecked.
+
+config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
+ bool " Enable options \"mem_start\", \"io_addr\", and \"irq\""
+ default n
+ depends on BUSYBOX_CONFIG_IFCONFIG
+ help
+ Allow the start address for shared memory, start address for I/O,
+ and/or the interrupt line used by the specified device.
+
+config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW
+ bool " Enable option \"hw\" (ether only)"
+ default y
+ depends on BUSYBOX_CONFIG_IFCONFIG
+ help
+ Set the hardware address of this interface, if the device driver
+ supports this operation. Currently, we only support the 'ether'
+ class.
+
+config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS
+ bool " Set the broadcast automatically"
+ default y
+ depends on BUSYBOX_CONFIG_IFCONFIG
+ help
+ Setting this will make ifconfig attempt to find the broadcast
+ automatically if the value '+' is used.
+
+config BUSYBOX_CONFIG_IFUPDOWN
+ bool "ifupdown"
+ default n
+ help
+ Activate or deactivate the specified interfaces. This applet makes
+ use of either "ifconfig" and "route" or the "ip" command to actually
+ configure network interfaces. Therefore, you will probably also want
+ to enable either BUSYBOX_CONFIG_IFCONFIG and BUSYBOX_CONFIG_ROUTE, or enable
+ BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP and the various BUSYBOX_CONFIG_IP options. Of
+ course you could use non-busybox versions of these programs, so
+ against my better judgement (since this will surely result in plenty
+ of support questions on the mailing list), I do not force you to
+ enable these additional options. It is up to you to supply either
+ "ifconfig" and "route" or the "ip" command, either via busybox or via
+ standalone utilities.
+
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
+ bool " Use ip applet"
+ default n
+ depends on BUSYBOX_CONFIG_IFUPDOWN
+ help
+ Use the iproute "ip" command to implement "ifup" and "ifdown", rather
+ than the default of using the older 'ifconfig' and 'route' utilities.
+
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN
+ bool " Use busybox ip applet"
+ default n
+ depends on BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
+ select BUSYBOX_CONFIG_IP
+ select BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
+ select BUSYBOX_CONFIG_FEATURE_IP_LINK
+ select BUSYBOX_CONFIG_FEATURE_IP_ROUTE
+ help
+ Use the busybox iproute "ip" applet to implement "ifupdown".
+
+ If leave this disabled, you must install the full-blown iproute2
+ utility or the "ifup" and "ifdown" applets will not work.
+
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN
+ bool " Use busybox ifconfig and route applets"
+ default n
+ depends on BUSYBOX_CONFIG_IFUPDOWN && !CONFIG_FEATURE_IFUPDOWN_IP
+ select BUSYBOX_CONFIG_IFCONFIG
+ select BUSYBOX_CONFIG_ROUTE
+ help
+ Use the busybox iproute "ifconfig" and "route" applets to
+ implement the "ifup" and "ifdown" utilities.
+
+ If leave this disabled, you must install the full-blown ifconfig
+ and route utilities, or the "ifup" and "ifdown" applets will not
+ work.
+
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4
+ bool " Enable support for IPv4"
+ default n
+ depends on BUSYBOX_CONFIG_IFUPDOWN
+ help
+ If you want busybox to talk IPv4, leave this on.
+
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6
+ bool " Enable support for IPv6"
+ default n
+ depends on BUSYBOX_CONFIG_IFUPDOWN
+ help
+ If you need support for IPv6, turn this option on.
+
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPX
+ bool " Enable support for IPX"
+ default n
+ depends on BUSYBOX_CONFIG_IFUPDOWN
+ help
+ If this option is selected you can use busybox to work with IPX
+ networks.
+
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING
+ bool " Enable mapping support"
+ default n
+ depends on BUSYBOX_CONFIG_IFUPDOWN
+ help
+ This enables support for the "mapping" stanza, unless you have
+ a weird network setup you don't need it.
+
+config BUSYBOX_CONFIG_INETD
+ bool "inetd"
+ default n
+ help
+ Internet superserver daemon
+
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_ECHO
+ bool " Support echo service"
+ default n
+ depends on BUSYBOX_CONFIG_INETD
+ help
+ Echo received data internal inetd service
+
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_DISCARD
+ bool " Support discard service"
+ default n
+ depends on BUSYBOX_CONFIG_INETD
+ help
+ Internet /dev/null internal inetd service
+
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_TIME
+ bool " Support time service"
+ default n
+ depends on BUSYBOX_CONFIG_INETD
+ help
+ Return 32 bit time since 1900 internal inetd service
+
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_DAYTIME
+ bool " Support daytime service"
+ default n
+ depends on BUSYBOX_CONFIG_INETD
+ help
+ Return human-readable time internal inetd service
+
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_CHARGEN
+ bool " Support chargen service"
+ default n
+ depends on BUSYBOX_CONFIG_INETD
+ help
+ Familiar character generator internal inetd service
+
+
+config BUSYBOX_CONFIG_IP
+ bool "ip"
+ default n
+ help
+ The "ip" applet is a TCP/IP interface configuration and routing
+ utility. You generally don't need "ip" to use busybox with
+ TCP/IP.
+
+if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPADDR
+ config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
+ default n
+ comment " address (forced enabled for ipaddr)"
+endif
+if ! (CONFIG_IP && BUSYBOX_CONFIG_IPADDR)
+ config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
+ bool " address"
+ default n
+ depends on BUSYBOX_CONFIG_IP
+ help
+ Address manipulation support for the "ip" applet.
+endif
+
+if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPLINK
+ config BUSYBOX_CONFIG_FEATURE_IP_LINK
+ default n
+ comment " link (forced enabled for iplink)"
+endif
+if !(CONFIG_IP && BUSYBOX_CONFIG_IPLINK)
+ config BUSYBOX_CONFIG_FEATURE_IP_LINK
+ bool " link"
+ default n
+ depends on BUSYBOX_CONFIG_IP
+ help
+ Configure network devices with "ip".
+endif
+
+if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPROUTE
+ config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
+ default n
+ comment " route (forced enabled for iproute)"
+endif
+if !(CONFIG_IP && BUSYBOX_CONFIG_IPROUTE)
+ config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
+ bool " route"
+ default n
+ depends on BUSYBOX_CONFIG_IP
+ help
+ Add support for routing table management to "ip".
+endif
+
+if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPTUNNEL
+ config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
+ default n
+ comment " tunnel (forced enabled for iptunnel)"
+endif
+if !(CONFIG_IP && BUSYBOX_CONFIG_IPTUNNEL)
+ config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
+ bool " tunnel"
+ default n
+ depends on BUSYBOX_CONFIG_IP
+ help
+ Add support for tunneling commands to "ip".
+endif
+
+config BUSYBOX_CONFIG_IPCALC
+ bool "ipcalc"
+ default n
+ help
+ ipcalc takes an IP address and netmask and calculates the
+ resulting broadcast, network, and host range.
+
+config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY
+ bool " Fancy IPCALC, more options, adds 1 kbyte"
+ default y
+ depends on BUSYBOX_CONFIG_IPCALC
+ help
+ Adds the options hostname, prefix and silent to the output of "ipcalc".
+
+config BUSYBOX_CONFIG_IPADDR
+ bool "ipaddr"
+ default n
+ help
+ Equivalent to selecting address support to "ip", above.
+
+config BUSYBOX_CONFIG_IPLINK
+ bool "iplink"
+ default n
+ help
+ Equivalent to selecting link support to "ip", above.
+
+config BUSYBOX_CONFIG_IPROUTE
+ bool "iproute"
+ default n
+ help
+ Equivalent to selecting route support to "ip", above.
+
+config BUSYBOX_CONFIG_IPTUNNEL
+ bool "iptunnel"
+ default n
+ help
+ Equivalent to selecting tunnel support to "ip", above.
+
+config BUSYBOX_CONFIG_NAMEIF
+ bool "nameif"
+ default n
+ help
+ nameif is used to rename network interface by its MAC address.
+ Renamed interfaces MUST be in the down state.
+ It is possible to use a file (default: /etc/mactab)
+ with list of new interface names and MACs.
+ Maximum interface name length: IF_NAMESIZE = 16
+ File fields are separated by space or tab.
+ File format:
+ # Comment
+ new_interface_name XX:XX:XX:XX:XX:XX
+
+config BUSYBOX_CONFIG_NC
+ bool "nc"
+ default y
+ help
+ A simple Unix utility which reads and writes data across network
+ connections.
+
+config BUSYBOX_CONFIG_NETMSG
+ bool "netmsg"
+ default y
+ help
+ simple program for sending udp broadcast messages
+
+config BUSYBOX_CONFIG_NETSTAT
+ bool "netstat"
+ default y
+ help
+ netstat prints information about the Linux networking subsystem.
+
+config BUSYBOX_CONFIG_NSLOOKUP
+ bool "nslookup"
+ default y
+ help
+ nslookup is a tool to query Internet name servers.
+
+config BUSYBOX_CONFIG_PING
+ bool "ping"
+ default y
+ help
+ ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
+ elicit an ICMP ECHO_RESPONSE from a host or gateway.
+
+config BUSYBOX_CONFIG_FEATURE_FANCY_PING
+ bool " Enable fancy ping output"
+ default y
+ depends on BUSYBOX_CONFIG_PING
+ help
+ Make the output from the ping applet include statistics, and at the
+ same time provide full support for ICMP packets.
+
+config BUSYBOX_CONFIG_PING6
+ bool "ping6"
+ default y
+ depends on BUSYBOX_CONFIG_FEATURE_IPV6
+ help
+ This will give you a ping that can talk IPv6.
+
+config BUSYBOX_CONFIG_FEATURE_FANCY_PING6
+ bool " Enable fancy ping6 output"
+ default y
+ depends on BUSYBOX_CONFIG_PING6
+ help
+ Make the output from the ping6 applet include statistics, and at the
+ same time provide full support for ICMP packets.
+
+config BUSYBOX_CONFIG_ROUTE
+ bool "route"
+ default y
+ help
+ Route displays or manipulates the kernel's IP routing tables.
+
+config BUSYBOX_CONFIG_TELNET
+ bool "telnet"
+ default y
+ help
+ Telnet is an interface to the TELNET protocol, but is also commonly
+ used to test other simple protocols.
+
+config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE
+ bool " Pass TERM type to remote host"
+ default y
+ depends on BUSYBOX_CONFIG_TELNET
+ help
+ Setting this option will forward the TERM environment variable to the
+ remote host you are connecting to. This is useful to make sure that
+ things like ANSI colors and other control sequences behave.
+
+config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN
+ bool " Pass USER type to remote host"
+ default n
+ depends on BUSYBOX_CONFIG_TELNET
+ help
+ Setting this option will forward the USER environment variable to the
+ remote host you are connecting to. This is useful when you need to
+ log into a machine without telling the username (autologin). This
+ option enables `-a' and `-l USER' arguments.
+
+config BUSYBOX_CONFIG_TELNETD
+ bool "telnetd"
+ default y
+ #select BUSYBOX_CONFIG_LOGIN
+ help
+ A daemon for the TELNET protocol, allowing you to log onto the host
+ running the daemon. Please keep in mind that the TELNET protocol
+ sends passwords in plain text. If you can't afford the space for an
+ SSH daemon and you trust your network, you may say 'y' here. As a
+ more secure alternative, you should seriously consider installing the
+ very small Dropbear SSH daemon instead:
+ http://matt.ucc.asn.au/dropbear/dropbear.html
+
+ Note that for busybox telnetd to work you need several things:
+ First of all, your kernel needs:
+ BUSYBOX_CONFIG_UNIX98_PTYS=y
+ BUSYBOX_CONFIG_DEVPTS_FS=y
+
+ Next, you need a /dev/pts directory on your root filesystem:
+
+ $ ls -ld /dev/pts
+ drwxr-xr-x 2 root root 0 Sep 23 13:21 /dev/pts/
+
+ Next you need the pseudo terminal master multiplexer /dev/ptmx:
+
+ $ ls -la /dev/ptmx
+ crw-rw-rw- 1 root tty 5, 2 Sep 23 13:55 /dev/ptmx
+
+ Any /dev/ttyp[0-9]* files you may have can be removed.
+ Next, you need to mount the devpts filesystem on /dev/pts using:
+
+ mount -t devpts devpts /dev/pts
+
+ You need to be sure that Busybox has BUSYBOX_CONFIG_LOGIN and
+ BUSYBOX_CONFIG_FEATURE_SUID enabled. And finally, you should make
+ certain that Busybox has been installed setuid root:
+
+ chown root.root /bin/busybox
+ chmod 4755 /bin/busybox
+
+ with all that done, telnetd _should_ work....
+
+
+config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD
+ bool " Support call from inetd only"
+ default n
+ depends on BUSYBOX_CONFIG_TELNETD
+ help
+ Selecting this will make telnetd only callable from inetd,
+ removing the standalone support.
+
+config BUSYBOX_CONFIG_TFTP
+ bool "tftp"
+ default n
+ help
+ This enables the Trivial File Transfer Protocol client program. TFTP
+ is usually used for simple, small transfers such as a root image
+ for a network-enabled bootloader.
+
+config BUSYBOX_CONFIG_FEATURE_TFTP_GET
+ bool " Enable \"get\" command"
+ default n
+ depends on BUSYBOX_CONFIG_TFTP
+ help
+ Add support for the GET command within the TFTP client. This allows
+ a client to retrieve a file from a TFTP server.
+
+config BUSYBOX_CONFIG_FEATURE_TFTP_PUT
+ bool " Enable \"put\" command"
+ default n
+ depends on BUSYBOX_CONFIG_TFTP
+ help
+ Add support for the PUT command within the TFTP client. This allows
+ a client to transfer a file to a TFTP server.
+
+config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
+ bool " Enable \"blocksize\" command"
+ default n
+ depends on BUSYBOX_CONFIG_TFTP
+ help
+ Allow the client to specify the desired block size for transfers.
+
+config BUSYBOX_CONFIG_FEATURE_TFTP_DEBUG
+ bool " Enable debug"
+ default n
+ depends on BUSYBOX_CONFIG_TFTP
+ help
+ Enable debug settings for tftp. This is useful if you're running
+ into problems with tftp as the protocol doesn't help you much when
+ you run into problems.
+
+config BUSYBOX_CONFIG_TRACEROUTE
+ bool "traceroute"
+ default y
+ help
+ Utility to trace the route of IP packets
+
+config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE
+ bool " Enable verbose output"
+ default y
+ depends on BUSYBOX_CONFIG_TRACEROUTE
+ help
+ Add some verbosity to traceroute. This includes amongst other things
+ hostnames and ICMP response types.
+
+config BUSYBOX_CONFIG_VCONFIG
+ bool "vconfig"
+ default y
+ help
+ Creates, removes, and configures VLAN interfaces
+
+config BUSYBOX_CONFIG_WGET
+ bool "wget"
+ default y
+ help
+ wget is a utility for non-interactive download of files from HTTP,
+ HTTPS, and FTP servers.
+
+config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR
+ bool " Enable a nifty process meter (+2k)"
+ default y
+ depends on BUSYBOX_CONFIG_WGET
+ help
+ Enable the transfer progress bar for wget transfers.
+
+config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION
+ bool " Enable HTTP authentication"
+ default y
+ depends on BUSYBOX_CONFIG_WGET
+ help
+ Support authenticated HTTP transfers.
+
+config BUSYBOX_CONFIG_FEATURE_WGET_IP6_LITERAL
+ bool " Enable IPv6 literal addresses"
+ default y
+ depends on BUSYBOX_CONFIG_WGET
+ help
+ Support IPv6 address literal notation in URLs.
+
+source package/busybox/config/networking/udhcp/Config.in
+
+endmenu
+
projects / openwrt / svn-archive / openwrt.git / blobdiff