move comgt to trunk and add network scripts for umts compatible with the wrt54g3g

[openwrt/staging/yousong.git] / package / comgt / files / 3g.sh

diff --git a/package/comgt/files/3g.sh b/package/comgt/files/3g.sh
new file mode 100644 (file)
index 0000000..125bec3
--- /dev/null
+++ b/package/comgt/files/3g.sh
@@ -0,0 +1,89 @@
+set_3g_led() {
+       grep WRT54G3G /proc/diag/model >/dev/null || return 0
+       echo "$1" > /proc/diag/led/3g_green
+       echo "$2" > /proc/diag/led/3g_blue
+       echo "$3" > /proc/diag/led/3g_blink
+}
+
+scan_3g() {
+       local device
+
+       scan_ppp "$@"
+       config_get device "$1" device
+
+       # try to figure out the device if it's invalid
+       [ -n "$device" -a -e "$device" ] || {
+               for device in /dev/tts/2 /dev/usb/tts/0 /dev/noz0; do
+                       [ -e "$device" ] && {
+                               config_set "$1" device "$device"
+                               break
+                       }
+               done
+       }
+
+       # enable 3G with the 3G button by default
+       config_get button "$1" button
+       [ -z "$button" ] && {
+               config_set "$1" button 1
+       }
+}
+
+stop_interface_3g() {
+       set_3g_led 0 0 0
+       killall gcom >/dev/null 2>/dev/null
+}
+
+setup_interface_3g() {
+       local iface="$1"
+       local config="$2"
+       
+       config_get device "$config" device
+
+       for module in slhc ppp_generic ppp_async; do
+               /sbin/insmod $module 2>&- >&-
+       done
+
+       config_get apn "$cfg" apn
+       config_get service "$cfg" service
+       config_get pincode "$cfg" pincode
+       config_get mtu "$cfg" mtu
+
+       set_3g_led 1 0 1
+
+       # figure out hardware specific commands for the card
+       if gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | grep Novatel 2>/dev/null >/dev/null; then
+               case "$service" in
+                       umts_only) CODE=2;;
+                       gprs_only) CODE=1;;
+                       *) CODE=0;;
+               esac
+               mode="AT\$NWRAT=${CODE},2"
+       else
+               case "$service" in
+                       umts_only) CODE=1;;
+                       gprs_only) CODE=0;;
+                       *) CODE=3;;
+               esac
+               mode="AT_OPSYS=${CODE}"
+       fi
+       
+       PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
+               echo "$cfg(3g): Failed to set the PIN code."
+               set_3g_led 0 0 0
+               return 1
+       }
+       MODE="$mode" gcom -d "$device" -s /etc/gcom/setmode.gcom
+       set_3g_led 1 0 0
+
+       start_pppd "$config" \
+               noaccomp \
+               nopcomp \
+               novj \
+               nobsdcomp \
+               noauth \
+               lock \
+               crtscts \
+               connect "USE_APN=\"$apn\" /etc/ppp/3g.connect" \
+               ${mtu:+mtu $mtu mru $mtu} \
+               460800 "$device"
+}