ipq807x: add Xiaomi AX3600

[openwrt/openwrt.git] / package / firmware / ipq-wifi / Makefile

diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile
index 906f11ac962ab61528f954fe2dd8d517aafde898..9b490e6f74e1cc868e71787a662c19fcc815b4ad 100644 (file)
--- a/package/firmware/ipq-wifi/Makefile
+++ b/package/firmware/ipq-wifi/Makefile
@@ -14,6 +14,8 @@ endef
 define Build/Compile
 endef
 
+# Use ath10k-bdencoder from https://github.com/qca/qca-swiss-army-knife.git
+# to generate the board-* files here.
 #
 # This is intended to be used on an interim basis until device-specific
 # board data for new devices is available through the upstream compilation
@@ -21,13 +23,27 @@ endef
 # Please send a mail with your device-specific board files upstream.
 # You can find instructions and examples on the linux-wireless wiki:
 # <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
-#
 
 ALLWIFIBOARDS:= \
-       aruba_ap-303 \
-       avm_fritzrepeater-1200 \
+       aruba_ap-365 \
+       devolo_magic-2-wifi-next \
+       edgecore_ecw5410 \
+       edgecore_oap100 \
+       extreme-networks_ws-ap3915i \
+       glinet_gl-a1300 \
+       glinet_gl-ap1300 \
+       glinet_gl-s1300 \
        linksys_ea8300 \
-       qxwlan_e2600ac
+       linksys_whw03v2 \
+       p2w_r619ac \
+       pakedge_wr-1 \
+       qxwlan_e2600ac-c1 \
+       qxwlan_e2600ac-c2 \
+       sony_ncp-hg100-cellular \
+       teltonika_rutx \
+       xiaomi_ax3600 \
+       zte_mf18a \
+       zte_mf289f
 
 ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
 
@@ -35,7 +51,7 @@ define Package/ipq-wifi-default
   SUBMENU:=ath10k Board-Specific Overrides
   SECTION:=firmware
   CATEGORY:=Firmware
-  DEPENDS:=@TARGET_ipq40xx
+  DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x||TARGET_ipq807x)
   TITLE:=Custom Board
 endef
 
@@ -44,17 +60,26 @@ define ipq-wifi-install-one-to
   $(INSTALL_DATA) $(1) $(2)/lib/firmware/ath10k/$(3)/board-2.bin
 endef
 
-# Note: .bin deprecated; supports existing boards
+define ipq-wifi-install-ath11-one-to
+  $(INSTALL_DIR)  $(2)/lib/firmware/ath11k/$(3)/
+  $(INSTALL_DATA) $(1) $(2)/lib/firmware/ath11k/$(3)/board-2.bin
+endef
 
 define ipq-wifi-install-one
-  $(if $(filter $(suffix $(1)),.QCA4019 .qca4019 .bin),\
+  $(if $(filter $(suffix $(1)),.QCA4019 .qca4019),\
     $(call ipq-wifi-install-one-to,$(1),$(2),QCA4019/hw1.0),\
   $(if $(filter $(suffix $(1)),.QCA9888 .qca9888),\
     $(call ipq-wifi-install-one-to,$(1),$(2),QCA9888/hw2.0),\
+  $(if $(filter $(suffix $(1)),.QCA9889 .qca9889),\
+    $(call ipq-wifi-install-one-to,$(1),$(2),QCA9887/hw1.0),\
   $(if $(filter $(suffix $(1)),.QCA9984 .qca9984),\
     $(call ipq-wifi-install-one-to,$(1),$(2),QCA9984/hw1.0),\
+  $(if $(filter $(suffix $(1)),.QCA99X0 .qca99x0),\
+    $(call ipq-wifi-install-one-to,$(1),$(2),QCA99X0/hw2.0),\
+  $(if $(filter $(suffix $(1)),.IPQ8074 .ipq8074),\
+    $(call ipq-wifi-install-ath11-one-to,$(1),$(2),IPQ8074/hw2.0),\
     $(error Unrecognized board-file suffix '$(suffix $(1))' for '$(1)')\
-  )))
+  ))))))
 
 endef
 # Blank line required at end of above define due to foreach context
@@ -87,12 +112,27 @@ Do not install it for any other device!
 endef
 
 # Add board name to ALLWIFIBOARDS
-# Place files in this directory as board-<devicename>.<qca4019|qca9888|qca9984>
+# Place files in this directory as board-<devicename>.<qca4019|qca9888|qca9889|qca9984|qca99x0|ipq8074>
 # Add $(eval $(call generate-ipq-wifi-package,<devicename>,<display name>))
 
-$(eval $(call generate-ipq-wifi-package,aruba_ap-303,Aruba AP-303))
-$(eval $(call generate-ipq-wifi-package,avm_fritzrepeater-1200,AVM FRITZRepeater 1200))
+$(eval $(call generate-ipq-wifi-package,aruba_ap-365,Aruba AP-365))
+$(eval $(call generate-ipq-wifi-package,devolo_magic-2-wifi-next,devolo Magic 2 WiFi next))
+$(eval $(call generate-ipq-wifi-package,edgecore_ecw5410,Edgecore ECW5410))
+$(eval $(call generate-ipq-wifi-package,edgecore_oap100,Edgecore OAP100))
+$(eval $(call generate-ipq-wifi-package,extreme-networks_ws-ap3915i,Edgecore OAP100))
+$(eval $(call generate-ipq-wifi-package,glinet_gl-a1300,GL.iNet GL-A1300))
+$(eval $(call generate-ipq-wifi-package,glinet_gl-ap1300,GL.iNet GL-AP1300))
+$(eval $(call generate-ipq-wifi-package,glinet_gl-s1300,GL.iNet GL-S1300))
 $(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
-$(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,Qxwlan E2600AC))
+$(eval $(call generate-ipq-wifi-package,linksys_whw03v2,Linksys WHW03 V2))
+$(eval $(call generate-ipq-wifi-package,p2w_r619ac,P&W R619AC))
+$(eval $(call generate-ipq-wifi-package,pakedge_wr-1,Pakedge WR-1))
+$(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac-c1,Qxwlan E2600AC C1))
+$(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac-c2,Qxwlan E2600AC C2))
+$(eval $(call generate-ipq-wifi-package,sony_ncp-hg100-cellular,Sony NCP-HG100/Cellular))
+$(eval $(call generate-ipq-wifi-package,teltonika_rutx,Teltonika RUTX))
+$(eval $(call generate-ipq-wifi-package,xiaomi_ax3600,Xiaomi AX3600))
+$(eval $(call generate-ipq-wifi-package,zte_mf18a,ZTE MF18A))
+$(eval $(call generate-ipq-wifi-package,zte_mf289f,ZTE MF289F))
 
 $(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))