ipq40xx: add support for MikroTik SXTsq 5 ac

[openwrt/openwrt.git] / package / firmware / ipq-wifi / Makefile

diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile
index 906f11ac962ab61528f954fe2dd8d517aafde898..e3b25bb556658ef9399b6e6399f9f218870be996 100644 (file)
--- a/package/firmware/ipq-wifi/Makefile
+++ b/package/firmware/ipq-wifi/Makefile
@@ -14,6 +14,8 @@ endef
 define Build/Compile
 endef
 
+# Use ath10k-bdencoder from https://github.com/qca/qca-swiss-army-knife.git
+# to generate the board-* files here.
 #
 # This is intended to be used on an interim basis until device-specific
 # board data for new devices is available through the upstream compilation
@@ -21,12 +23,32 @@ endef
 # Please send a mail with your device-specific board files upstream.
 # You can find instructions and examples on the linux-wireless wiki:
 # <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
-#
 
 ALLWIFIBOARDS:= \
+       8dev_habanero-dvk \
        aruba_ap-303 \
        avm_fritzrepeater-1200 \
+       buffalo_wtr-m2133hp \
+       cellc_rtl30vw \
+       devolo_magic-2-wifi-next \
+       dlink_dap2610 \
+       edgecore_ecw5410 \
+       edgecore_oap100 \
+       engenius_eap2200 \
+       engenius_emd1 \
+       engenius_emr3500 \
+       ezviz_cs-w3-wd1200g-eup \
+       glinet_gl-ap1300 \
+       glinet_gl-s1300 \
        linksys_ea8300 \
+       linksys_mr8300-v0 \
+       luma_wrtq-329acn \
+       mikrotik_hap-ac2 \
+       mikrotik_sxtsq-5-ac \
+       mobipromo_cm520-79f \
+       nec_wg2600hp3 \
+       plasmacloud_pa1200 \
+       plasmacloud_pa2200 \
        qxwlan_e2600ac
 
 ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
@@ -35,7 +57,7 @@ define Package/ipq-wifi-default
   SUBMENU:=ath10k Board-Specific Overrides
   SECTION:=firmware
   CATEGORY:=Firmware
-  DEPENDS:=@TARGET_ipq40xx
+  DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x)
   TITLE:=Custom Board
 endef
 
@@ -44,10 +66,8 @@ define ipq-wifi-install-one-to
   $(INSTALL_DATA) $(1) $(2)/lib/firmware/ath10k/$(3)/board-2.bin
 endef
 
-# Note: .bin deprecated; supports existing boards
-
 define ipq-wifi-install-one
-  $(if $(filter $(suffix $(1)),.QCA4019 .qca4019 .bin),\
+  $(if $(filter $(suffix $(1)),.QCA4019 .qca4019),\
     $(call ipq-wifi-install-one-to,$(1),$(2),QCA4019/hw1.0),\
   $(if $(filter $(suffix $(1)),.QCA9888 .qca9888),\
     $(call ipq-wifi-install-one-to,$(1),$(2),QCA9888/hw2.0),\
@@ -90,9 +110,30 @@ endef
 # Place files in this directory as board-<devicename>.<qca4019|qca9888|qca9984>
 # Add $(eval $(call generate-ipq-wifi-package,<devicename>,<display name>))
 
+$(eval $(call generate-ipq-wifi-package,8dev_habanero-dvk,8devices Habanero DVK))
 $(eval $(call generate-ipq-wifi-package,aruba_ap-303,Aruba AP-303))
 $(eval $(call generate-ipq-wifi-package,avm_fritzrepeater-1200,AVM FRITZRepeater 1200))
+$(eval $(call generate-ipq-wifi-package,buffalo_wtr-m2133hp,Buffalo WTR-M2133HP))
+$(eval $(call generate-ipq-wifi-package,cellc_rtl30vw, Cell C RTL30VW))
+$(eval $(call generate-ipq-wifi-package,devolo_magic-2-wifi-next,devolo Magic 2 WiFi next))
+$(eval $(call generate-ipq-wifi-package,dlink_dap2610,D-Link DAP-2610))
+$(eval $(call generate-ipq-wifi-package,edgecore_ecw5410,Edgecore ECW5410))
+$(eval $(call generate-ipq-wifi-package,edgecore_oap100,Edgecore OAP100))
+$(eval $(call generate-ipq-wifi-package,engenius_eap2200,EnGenius EAP2200))
+$(eval $(call generate-ipq-wifi-package,engenius_emd1,EnGenius EMD1))
+$(eval $(call generate-ipq-wifi-package,engenius_emr3500,EnGenius EMR3500))
+$(eval $(call generate-ipq-wifi-package,ezviz_cs-w3-wd1200g-eup,EZVIZ CS-W3-WD1200G EUP))
+$(eval $(call generate-ipq-wifi-package,glinet_gl-ap1300,GL.iNet GL-AP1300))
+$(eval $(call generate-ipq-wifi-package,glinet_gl-s1300,GL.iNet GL-S1300))
 $(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
+$(eval $(call generate-ipq-wifi-package,linksys_mr8300-v0,Linksys MR8300))
+$(eval $(call generate-ipq-wifi-package,luma_wrtq-329acn,Luma WRTQ-329ACN))
+$(eval $(call generate-ipq-wifi-package,mikrotik_hap-ac2,Mikrotik hAP ac2))
+$(eval $(call generate-ipq-wifi-package,mikrotik_sxtsq-5-ac,MikroTik SXTsq 5 ac))
+$(eval $(call generate-ipq-wifi-package,mobipromo_cm520-79f,MobiPromo CM520-79F))
+$(eval $(call generate-ipq-wifi-package,nec_wg2600hp3,NEC Platforms WG2600HP3))
+$(eval $(call generate-ipq-wifi-package,plasmacloud_pa1200,Plasma Cloud PA1200))
+$(eval $(call generate-ipq-wifi-package,plasmacloud_pa2200,Plasma Cloud PA2200))
 $(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,Qxwlan E2600AC))
 
 $(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))