broadcom-wl: remove package
[openwrt/staging/wigyori.git] / package / kernel / broadcom-wl / files / lib / wifi / broadcom.sh
diff --git a/package/kernel/broadcom-wl/files/lib/wifi/broadcom.sh b/package/kernel/broadcom-wl/files/lib/wifi/broadcom.sh
deleted file mode 100644 (file)
index 352c365..0000000
+++ /dev/null
@@ -1,480 +0,0 @@
-append DRIVERS "broadcom"
-
-scan_broadcom() {
-       local device="$1"
-       local vif vifs wds
-       local adhoc sta apmode mon disabled
-       local adhoc_if sta_if ap_if mon_if
-
-       config_get vifs "$device" vifs
-       for vif in $vifs; do
-               config_get_bool disabled "$vif" disabled 0
-               [ $disabled -eq 0 ] || continue
-
-               local mode
-               config_get mode "$vif" mode
-               case "$mode" in
-                       adhoc)
-                               adhoc=1
-                               adhoc_if="$vif"
-                       ;;
-                       sta)
-                               sta=1
-                               sta_if="$vif"
-                       ;;
-                       ap)
-                               apmode=1
-                               ap_if="${ap_if:+$ap_if }$vif"
-                       ;;
-                       wds)
-                               local addr
-                               config_get addr "$vif" bssid
-                               [ -z "$addr" ] || {
-                                       addr=$(echo "$addr" | tr 'A-F' 'a-f')
-                                       append wds "$addr"
-                               }
-                       ;;
-                       monitor)
-                               mon=1
-                               mon_if="$vif"
-                       ;;
-                       *) echo "$device($vif): Invalid mode";;
-               esac
-       done
-       config_set "$device" wds "$wds"
-
-       local _c=
-       for vif in ${adhoc_if:-$sta_if $ap_if $mon_if}; do
-               config_set "$vif" ifname "${device}${_c:+-$_c}"
-               _c=$((${_c:-0} + 1))
-       done
-       config_set "$device" vifs "${adhoc_if:-$sta_if $ap_if $mon_if}"
-
-       ap=1
-       infra=1
-       if [ "$_c" -gt 1 ]; then
-               mssid=1
-       else
-               mssid=
-       fi
-       apsta=0
-       radio=1
-       monitor=0
-       case "$adhoc:$sta:$apmode:$mon" in
-               1*)
-                       ap=0
-                       mssid=
-                       infra=0
-               ;;
-               :1:1:)
-                       apsta=1
-                       wet=1
-               ;;
-               :1::)
-                       wet=1
-                       ap=0
-                       mssid=
-               ;;
-               :::1)
-                       wet=1
-                       ap=0
-                       mssid=
-                       monitor=1
-               ;;
-               ::)
-                       radio=0
-               ;;
-       esac
-}
-
-disable_broadcom() {
-       local device="$1"
-       set_wifi_down "$device"
-       (
-               include /lib/network
-
-               local pid_file=/var/run/nas.$device.pid
-               [ -e $pid_file ] && start-stop-daemon -K -q -s SIGKILL -p $pid_file && rm $pid_file
-
-               # make sure the interfaces are down and removed from all bridges
-               local dev ifname
-               for dev in /sys/class/net/wds${device##wl}-* /sys/class/net/${device}-* /sys/class/net/${device}; do
-                       if [ -e "$dev" ]; then
-                               ifname=${dev##/sys/class/net/}
-                               ip link set dev "$ifname" down
-                               unbridge "$ifname"
-                       fi
-               done
-
-               # make sure all of the devices are disabled in the driver
-               local ifdown=
-               local bssmax=$(wlc ifname "$device" bssmax)
-               local vif=$((${bssmax:-4} - 1))
-               append ifdown "down" "$N"
-               append ifdown "wds none" "$N"
-               while [ $vif -ge 0 ]; do
-                       append ifdown "vif $vif" "$N"
-                       append ifdown "enabled 0" "$N"
-                       vif=$(($vif - 1))
-               done
-
-               wlc ifname "$device" stdin <<EOF
-$ifdown
-leddc 0xffff
-EOF
-       )
-       true
-}
-
-enable_broadcom() {
-       local device="$1"
-       local channel country maxassoc wds vifs distance slottime rxantenna txantenna
-       local frameburst macfilter maclist macaddr txpower frag rts hwmode htmode
-       config_get channel "$device" channel
-       config_get country "$device" country
-       config_get maxassoc "$device" maxassoc
-       config_get wds "$device" wds
-       config_get vifs "$device" vifs
-       config_get distance "$device" distance
-       config_get slottime "$device" slottime
-       config_get rxantenna "$device" rxantenna
-       config_get txantenna "$device" txantenna
-       config_get_bool frameburst "$device" frameburst
-       config_get macfilter "$device" macfilter
-       config_get maclist "$device" maclist
-       config_get macaddr "$device" macaddr $(wlc ifname "$device" default_bssid)
-       config_get txpower "$device" txpower
-       config_get frag "$device" frag
-       config_get rts "$device" rts
-       config_get hwmode "$device" hwmode
-       config_get htmode "$device" htmode
-       local doth=0
-       local wmm=1
-
-       [ -z "$slottime" ] && {
-               [ -n "$distance" ] && {
-                       # slottime = 9 + (distance / 150) + (distance % 150 ? 1 : 0)
-                       slottime="$((9 + ($distance / 150) + 1 - (150 - ($distance % 150)) / 150 ))"
-               }
-       } || {
-               slottime="${slottime:--1}"
-       }
-
-       case "$macfilter" in
-               allow|2)
-                       macfilter=2;
-               ;;
-               deny|1)
-                       macfilter=1;
-               ;;
-               disable|none|0)
-                       macfilter=0;
-               ;;
-       esac
-
-       local gmode=2 nmode=0 nreqd=
-       case "$hwmode" in
-               *a)     gmode=;;
-               *b)     gmode=0;;
-               *bg)    gmode=1;;
-               *g)     gmode=2;;
-               *gst)   gmode=4;;
-               *lrs)   gmode=5;;
-               *)      nmode=1; nreqd=0;;
-       esac
-
-       case "$hwmode" in
-               n|11n)  nmode=1; nreqd=1;;
-               *n*)    nmode=1; nreqd=0;;
-       esac
-
-        # Use 'nmode' for N-Phy only
-       [ "$(wlc ifname "$device" phytype)" = 4 ] || nmode=
-
-       local band chanspec
-       [ ${channel:-0} -ge 1 -a ${channel:-0} -le 14 ] && band=2
-       [ ${channel:-0} -ge 36 ] && {
-               band=1
-               gmode=
-       }
-
-       # Use 'chanspec' instead of 'channel' for 'N' modes (See bcmwifi.h)
-       [ -n "$nmode" -a -n "$band" -a -n "$channel" ] && {
-               case "$htmode" in
-                       HT40)
-                               if [ -n "$gmode" ]; then
-                                       [ $channel -lt 7 ] && htmode="HT40+" || htmode="HT40-"
-                               else
-                                       [ $(( ($channel / 4) % 2 )) -eq 1 ] && htmode="HT40+" || htmode="HT40-"
-                               fi
-                       ;;
-               esac
-               case "$htmode" in
-                       HT40-)  chanspec=$(printf 0x%x%x%02x $band 0xe $(($channel - 2))); nmode=1; channel=;;
-                       HT40+)  chanspec=$(printf 0x%x%x%02x $band 0xd $(($channel + 2))); nmode=1; channel=;;
-                       HT20)   chanspec=$(printf 0x%x%x%02x $band 0xb $channel); nmode=1; channel=;;
-                       *) ;;
-               esac
-       }
-
-       local leddc=$(wlc ifname "$device" leddc)
-       [ $((leddc)) -eq $((0xffff)) ] && {
-               leddc=0x005a000a;
-       }
-
-       local _c=0
-       local nas="$(command -v nas)"
-       local if_pre_up if_up nas_cmd
-       local vif vif_pre_up vif_post_up vif_do_up vif_txpower
-       local bssmax=$(wlc ifname "$device" bssmax)
-       bssmax=${bssmax:-4}
-
-       for vif in $vifs; do
-               [ $_c -ge $bssmax ] && break
-
-               config_get vif_txpower "$vif" txpower
-
-               local mode
-               config_get mode "$vif" mode
-               append vif_pre_up "vif $_c" "$N"
-               append vif_post_up "vif $_c" "$N"
-               append vif_do_up "vif $_c" "$N"
-
-               config_get_bool wmm "$vif" wmm "$wmm"
-               config_get_bool doth "$vif" doth "$doth"
-
-               [ "$mode" = "sta" ] || {
-                       local hidden isolate
-                       config_get_bool hidden "$vif" hidden 0
-                       append vif_pre_up "closed $hidden" "$N"
-                       config_get_bool isolate "$vif" isolate 0
-                       append vif_pre_up "ap_isolate $isolate" "$N"
-               }
-
-               local wsec_r=0
-               local eap_r=0
-               local wsec=0
-               local auth=0
-               local nasopts=
-               local enc key rekey
-
-               config_get enc "$vif" encryption
-               case "$enc" in
-                       *wep*)
-                               local def defkey k knr
-                               wsec_r=1
-                               wsec=1
-                               defkey=1
-                               config_get key "$vif" key
-                               case "$enc" in
-                                       *shared*) append vif_do_up "wepauth 1" "$N";;
-                                       *) append vif_do_up "wepauth 0" "$N";;
-                               esac
-                               case "$key" in
-                                       [1234])
-                                               defkey="$key"
-                                               for knr in 1 2 3 4; do
-                                                       config_get k "$vif" key$knr
-                                                       [ -n "$k" ] || continue
-                                                       [ "$defkey" = "$knr" ] && def="=" || def=""
-                                                       append vif_do_up "wepkey $def$knr,$k" "$N"
-                                               done
-                                       ;;
-                                       "");;
-                                       *) append vif_do_up "wepkey =1,$key" "$N";;
-                               esac
-                       ;;
-                       *psk*)
-                               wsec_r=1
-                               config_get key "$vif" key
-
-                               # psk version + default cipher
-                               case "$enc" in
-                                       *mixed*|*psk+psk2*) auth=132; wsec=6;;
-                                       *psk2*) auth=128; wsec=4;;
-                                       *) auth=4; wsec=2;;
-                               esac
-
-                               # cipher override
-                               case "$enc" in
-                                       *tkip+aes*|*tkip+ccmp*|*aes+tkip*|*ccmp+tkip*) wsec=6;;
-                                       *aes*|*ccmp*) wsec=4;;
-                                       *tkip*) wsec=2;;
-                               esac
-
-                               # group rekey interval
-                               config_get rekey "$vif" wpa_group_rekey
-
-                               eval "${vif}_key=\"\$key\""
-                               nasopts="-k \"\$${vif}_key\"${rekey:+ -g $rekey}"
-                       ;;
-                       *wpa*)
-                               local auth_port auth_secret auth_server
-                               wsec_r=1
-                               eap_r=1
-                               config_get auth_server "$vif" auth_server
-                               [ -z "$auth_server" ] && config_get auth_server "$vif" server
-                               config_get auth_port "$vif" auth_port
-                               [ -z "$auth_port" ] && config_get auth_port "$vif" port
-                               config_get auth_secret "$vif" auth_secret
-                               [ -z "$auth_secret" ] && config_get auth_secret "$vif" key
-
-                               # wpa version + default cipher
-                               case "$enc" in
-                                       *mixed*|*wpa+wpa2*) auth=66; wsec=6;;
-                                       *wpa2*) auth=64; wsec=4;;
-                                       *) auth=2; wsec=2;;
-                               esac
-
-                               # cipher override
-                               case "$enc" in
-                                       *tkip+aes*|*tkip+ccmp*|*aes+tkip*|*ccmp+tkip*) wsec=6;;
-                                       *aes*|*ccmp*) wsec=4;;
-                                       *tkip*) wsec=2;;
-                               esac
-
-                               # group rekey interval
-                               config_get rekey "$vif" wpa_group_rekey
-
-                               eval "${vif}_key=\"\$auth_secret\""
-                               nasopts="-r \"\$${vif}_key\" -h $auth_server -p ${auth_port:-1812}${rekey:+ -g $rekey}"
-                       ;;
-               esac
-               append vif_do_up "wsec $wsec" "$N"
-               append vif_do_up "wpa_auth $auth" "$N"
-               append vif_do_up "wsec_restrict $wsec_r" "$N"
-               append vif_do_up "eap_restrict $eap_r" "$N"
-
-               local ssid
-               config_get ssid "$vif" ssid
-               append vif_post_up "vlan_mode 0" "$N"
-               append vif_pre_up "ssid $ssid" "$N"
-
-               [ "$mode" = "monitor" ] && {
-                       append vif_post_up "monitor $monitor" "$N"
-               }
-
-               [ "$mode" = "adhoc" ] && {
-                       local bssid
-                       config_get bssid "$vif" bssid
-                       [ -n "$bssid" ] && {
-                               append vif_pre_up "bssid $bssid" "$N"
-                               append vif_pre_up "ibss_merge 0" "$N"
-                       } || {
-                               append vif_pre_up "ibss_merge 1" "$N"
-                       }
-               }
-
-               append vif_post_up "enabled 1" "$N"
-
-               local ifname
-               config_get ifname "$vif" ifname
-               local if_cmd="if_pre_up"
-               [ "$ifname" != "${ifname##${device}-}" ] && if_cmd="if_up"
-               append $if_cmd "macaddr=\$(wlc ifname '$ifname' cur_etheraddr)" ";$N"
-               append $if_cmd "ip link set dev '$ifname' address \$macaddr" ";$N"
-               append if_up "ip link set dev '$ifname' up" ";$N"
-
-               local net_cfg="$(find_net_config "$vif")"
-               [ -z "$net_cfg" ] || {
-                       ubus -t 30 wait_for network.interface."$net_cfg"
-                       append if_up "set_wifi_up '$vif' '$ifname'" ";$N"
-                       append if_up "start_net '$ifname' '$net_cfg'" ";$N"
-               }
-               [ -z "$nas" -o -z "$nasopts" ] || {
-                       eval "${vif}_ssid=\"\$ssid\""
-                       local nas_mode="-A"
-                       [ "$mode" = "sta" ] && nas_mode="-S"
-                       [ -z "$nas_cmd" ] && {
-                               local pid_file=/var/run/nas.$device.pid
-                               nas_cmd="start-stop-daemon -S -b -p $pid_file -x $nas -- -P $pid_file -H 34954"
-                       }
-                       append nas_cmd "-i $ifname $nas_mode -m $auth -w $wsec -s \"\$${vif}_ssid\" -g 3600 -F $nasopts"
-               }
-               _c=$(($_c + 1))
-       done
-       wlc ifname "$device" stdin <<EOF
-${macaddr:+bssid $macaddr}
-${macaddr:+cur_etheraddr $macaddr}
-band ${band:-0}
-${nmode:+nmode $nmode}
-${nmode:+${nreqd:+nreqd $nreqd}}
-${gmode:+gmode $gmode}
-leddc $leddc
-apsta $apsta
-ap $ap
-${mssid:+mssid $mssid}
-infra $infra
-${wet:+wet 1}
-802.11d 0
-802.11h ${doth:-0}
-wme ${wmm:-1}
-rxant ${rxantenna:-3}
-txant ${txantenna:-3}
-fragthresh ${frag:-2346}
-rtsthresh ${rts:-2347}
-monitor ${monitor:-0}
-
-radio ${radio:-1}
-macfilter ${macfilter:-0}
-maclist ${maclist:-none}
-${wds:+wds $wds}
-country ${country:-US}
-${channel:+channel $channel}
-${chanspec:+chanspec $chanspec}
-maxassoc ${maxassoc:-128}
-slottime ${slottime:--1}
-${frameburst:+frameburst $frameburst}
-
-$vif_pre_up
-EOF
-       eval "$if_pre_up"
-       wlc ifname "$device" stdin <<EOF
-up
-$vif_post_up
-EOF
-       eval "$if_up"
-       wlc ifname "$device" stdin <<EOF
-$vif_do_up
-EOF
-
-       # use vif_txpower (from last wifi-iface) instead of txpower (from
-       # wifi-device) if the latter does not exist
-       txpower=${txpower:-$vif_txpower}
-       [ -z "$txpower" ] || iwconfig $device txpower ${txpower}dBm
-
-       # fd 1000 is an inherited lock file descriptor for preventing concurrent
-       # init script executions. Close it here to prevent the nas daemon from
-       # inheriting it further to avoid holding the lock indefinitely.
-       eval "$nas_cmd 1000>&-"
-}
-
-
-detect_broadcom() {
-       local i=-1
-
-       while grep -qs "^ *wl$((++i)):" /proc/net/dev; do
-               local channel type
-
-               config_get type wl${i} type
-               [ "$type" = broadcom ] && continue
-               channel=`wlc ifname wl${i} channel`
-
-               uci -q batch <<-EOF
-                       set wireless.wl${i}=wifi-device
-                       set wireless.wl${i}.type=broadcom
-                       set wireless.wl${i}.channel=${channel:-11}
-                       set wireless.wl${i}.txantenna=3
-                       set wireless.wl${i}.rxantenna=3
-                       set wireless.wl${i}.disabled=1
-
-                       set wireless.default_wl${i}=wifi-iface
-                       set wireless.default_wl${i}.device=wl${i}
-                       set wireless.default_wl${i}.network=lan
-                       set wireless.default_wl${i}.mode=ap
-                       set wireless.default_wl${i}.ssid=OpenWrt${i#0}
-                       set wireless.default_wl${i}.encryption=none
-EOF
-               uci -q commit wireless
-       done
-}