$(eval $(call KernelPackage,mii))
+define KernelPackage/mdio-devres
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=Supports MDIO device registration
+ DEPENDS:=+kmod-libphy +(TARGET_armvirt||TARGET_bcm27xx_bcm2708||TARGET_malta||TARGET_tegra):kmod-of-mdio
+ KCONFIG:=CONFIG_MDIO_DEVRES
+ HIDDEN:=1
+ FILES:=$(LINUX_DIR)/drivers/net/phy/mdio_devres.ko
+ AUTOLOAD:=$(call AutoProbe,mdio-devres)
+endef
+
+define KernelPackage/mdio-devres/description
+ Supports MDIO device registration
+endef
+
+$(eval $(call KernelPackage,mdio-devres))
+
+
define KernelPackage/mdio-gpio
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:= Supports GPIO lib-based MDIO busses
- DEPENDS:=+kmod-libphy @GPIO_SUPPORT +(TARGET_armvirt||TARGET_bcm27xx_bcm2708||TARGET_tegra):kmod-of-mdio
+ DEPENDS:=+kmod-libphy @GPIO_SUPPORT +(TARGET_armvirt||TARGET_bcm27xx_bcm2708||TARGET_malta||TARGET_tegra):kmod-of-mdio
KCONFIG:= \
CONFIG_MDIO_BITBANG \
CONFIG_MDIO_GPIO
FILES:= \
- $(LINUX_DIR)/drivers/net/phy/mdio-gpio.ko \
- $(LINUX_DIR)/drivers/net/phy/mdio-bitbang.ko
+ $(LINUX_DIR)/drivers/net/mdio/mdio-gpio.ko \
+ $(LINUX_DIR)/drivers/net/mdio/mdio-bitbang.ko
AUTOLOAD:=$(call AutoProbe,mdio-gpio)
endef
$(eval $(call KernelPackage,et131x))
+define KernelPackage/phy-microchip
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=Microchip Ethernet PHY driver
+ KCONFIG:=CONFIG_MICROCHIP_PHY
+ DEPENDS:=+kmod-libphy
+ FILES:=$(LINUX_DIR)/drivers/net/phy/microchip.ko
+ AUTOLOAD:=$(call AutoLoad,18,microchip,1)
+endef
+
+define KernelPackage/phy-microchip/description
+ Supports the LAN88XX PHYs.
+endef
+
+$(eval $(call KernelPackage,phy-microchip))
+
define KernelPackage/phylib-broadcom
SUBMENU:=$(NETWORK_DEVICES_MENU)
$(eval $(call KernelPackage,phylib-broadcom))
+define KernelPackage/phy-ax88796b
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=Asix PHY driver
+ KCONFIG:=CONFIG_AX88796B_PHY
+ DEPENDS:=+kmod-libphy
+ FILES:=$(LINUX_DIR)/drivers/net/phy/ax88796b.ko
+ AUTOLOAD:=$(call AutoProbe,ax88796b)
+endef
+
+define KernelPackage/phy-ax88796b/description
+ Currently supports the Asix Electronics PHY found in the X-Surf 100
+ AX88796B package.
+endef
+
+$(eval $(call KernelPackage,phy-ax88796b))
+
+
define KernelPackage/phy-broadcom
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=Broadcom Ethernet PHY driver
$(eval $(call KernelPackage,switch-bcm53xx-mdio))
-define KernelPackage/switch-mvsw61xx
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- TITLE:=Marvell 88E61xx switch support
- DEPENDS:=+kmod-swconfig
- KCONFIG:=CONFIG_MVSW61XX_PHY
- FILES:=$(LINUX_DIR)/drivers/net/phy/mvsw61xx.ko
- AUTOLOAD:=$(call AutoLoad,42,mvsw61xx)
-endef
-
-define KernelPackage/switch-mvsw61xx/description
- Marvell 88E61xx switch support
-endef
-
-$(eval $(call KernelPackage,switch-mvsw61xx))
define KernelPackage/switch-ip17xx
SUBMENU:=$(NETWORK_DEVICES_MENU)
define KernelPackage/switch-rtl8366-smi
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=Realtek RTL8366 SMI switch interface support
- DEPENDS:=@GPIO_SUPPORT +kmod-swconfig +(TARGET_armvirt||TARGET_bcm27xx_bcm2708||TARGET_tegra):kmod-of-mdio
+ DEPENDS:=@GPIO_SUPPORT +kmod-swconfig +(TARGET_armvirt||TARGET_bcm27xx_bcm2708||TARGET_malta||TARGET_tegra):kmod-of-mdio
KCONFIG:=CONFIG_RTL8366_SMI
FILES:=$(LINUX_DIR)/drivers/net/phy/rtl8366_smi.ko
AUTOLOAD:=$(call AutoLoad,42,rtl8366_smi,1)
DEPENDS:=+kmod-switch-rtl8366-smi
KCONFIG:=CONFIG_RTL8366RB_PHY
FILES:=$(LINUX_DIR)/drivers/net/phy/rtl8366rb.ko
- AUTOLOAD:=$(call AutoLoad,43,rtl8366rb)
+ AUTOLOAD:=$(call AutoLoad,43,rtl8366rb,1)
endef
define KernelPackage/switch-rtl8366rb/description
DEPENDS:=+kmod-switch-rtl8366-smi
KCONFIG:=CONFIG_RTL8366S_PHY
FILES:=$(LINUX_DIR)/drivers/net/phy/rtl8366s.ko
- AUTOLOAD:=$(call AutoLoad,43,rtl8366s)
+ AUTOLOAD:=$(call AutoLoad,43,rtl8366s,1)
endef
define KernelPackage/switch-rtl8366s/description
$(eval $(call KernelPackage,switch-rtl8366s))
+define KernelPackage/switch-rtl8367
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=Realtek RTL8367 switch support
+ DEPENDS:=+kmod-switch-rtl8366-smi
+ KCONFIG:=CONFIG_RTL8367_PHY
+ FILES:=$(LINUX_DIR)/drivers/net/phy/rtl8367.ko
+ AUTOLOAD:=$(call AutoLoad,43,rtl8367,1)
+endef
+
+define KernelPackage/switch-rtl8367/description
+ Realtek RTL8367 switch support
+endef
+
+$(eval $(call KernelPackage,switch-rtl8367))
+
+
define KernelPackage/switch-rtl8367b
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=Realtek RTL8367R/B switch support
$(eval $(call KernelPackage,switch-rtl8367b))
+define KernelPackage/switch-ar8xxx
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=Atheros AR8216/8327 switch support
+ DEPENDS:=+kmod-swconfig +kmod-mdio-devres
+ KCONFIG:=CONFIG_AR8216_PHY
+ FILES:=$(LINUX_DIR)/drivers/net/phy/ar8xxx.ko
+ AUTOLOAD:=$(call AutoLoad,43,ar8xxx,1)
+endef
+
+define KernelPackage/switch-ar8xxx/description
+ Atheros AR8216/8327 switch support
+endef
+
+$(eval $(call KernelPackage,switch-ar8xxx))
+
+
define KernelPackage/natsemi
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=National Semiconductor DP8381x series
define KernelPackage/r8169
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=RealTek RTL-8169 PCI Gigabit Ethernet Adapter kernel support
- DEPENDS:=@PCI_SUPPORT +kmod-mii +r8169-firmware +kmod-phy-realtek
- KCONFIG:=CONFIG_R8169 \
+ DEPENDS:=@PCI_SUPPORT +kmod-mii +r8169-firmware +kmod-phy-realtek +kmod-mdio-devres
+ KCONFIG:= \
+ CONFIG_R8169 \
CONFIG_R8169_NAPI=y \
CONFIG_R8169_VLAN=n
FILES:=$(LINUX_DIR)/drivers/net/ethernet/realtek/r8169.ko
CONFIG_IGB_HWMON=y \
CONFIG_IGB_DCA=n
FILES:=$(LINUX_DIR)/drivers/net/ethernet/intel/igb/igb.ko
- AUTOLOAD:=$(call AutoLoad,35,igb)
+ AUTOLOAD:=$(call AutoLoad,35,igb,1)
endef
define KernelPackage/igb/description
define KernelPackage/ixgbe
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=Intel(R) 82598/82599 PCI-Express 10 Gigabit Ethernet support
- DEPENDS:=@PCI_SUPPORT +kmod-mdio +kmod-ptp +kmod-hwmon-core +!LINUX_4_19:kmod-libphy
+ DEPENDS:=@PCI_SUPPORT +kmod-mdio +kmod-ptp +kmod-hwmon-core +kmod-libphy +kmod-mdio-devres
KCONFIG:=CONFIG_IXGBE \
CONFIG_IXGBE_VXLAN=n \
CONFIG_IXGBE_HWMON=y \
define KernelPackage/i40e
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=Intel(R) Ethernet Controller XL710 Family support
- DEPENDS:=@PCI_SUPPORT +kmod-mdio +kmod-ptp +kmod-hwmon-core +!LINUX_4_19:kmod-libphy
+ DEPENDS:=@PCI_SUPPORT +kmod-mdio +kmod-ptp +kmod-hwmon-core +kmod-libphy
KCONFIG:=CONFIG_I40E \
CONFIG_I40E_VXLAN=n \
CONFIG_I40E_HWMON=y \
CONFIG_I40EVF \
CONFIG_IAVF
FILES:= \
- $(LINUX_DIR)/drivers/net/ethernet/intel/i40evf/i40evf.ko@lt4.20 \
- $(LINUX_DIR)/drivers/net/ethernet/intel/iavf/iavf.ko@ge4.20
+ $(LINUX_DIR)/drivers/net/ethernet/intel/iavf/iavf.ko
AUTOLOAD:=$(call AutoProbe,i40evf iavf)
AUTOLOAD:=$(call AutoProbe,iavf)
endef
$(eval $(call KernelPackage,hfcmulti))
-define KernelPackage/gigaset
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- TITLE:=Siemens Gigaset support for isdn4linux
- DEPENDS:=@USB_SUPPORT +kmod-isdn4linux +kmod-lib-crc-ccitt +kmod-usb-core @LINUX_4_19
- URL:=http://gigaset307x.sourceforge.net/
- KCONFIG:= \
- CONFIG_ISDN_DRV_GIGASET \
- CONFIG_GIGASET_BASE \
- CONFIG_GIGASET_M101 \
- CONFIG_GIGASET_M105 \
- CONFIG_GIGASET_UNDOCREQ=y \
- CONFIG_GIGASET_I4L=y
- FILES:= \
- $(LINUX_DIR)/drivers/isdn/gigaset/gigaset.ko \
- $(LINUX_DIR)/drivers/isdn/gigaset/bas_gigaset.ko \
- $(LINUX_DIR)/drivers/isdn/gigaset/ser_gigaset.ko \
- $(LINUX_DIR)/drivers/isdn/gigaset/usb_gigaset.ko
- AUTOLOAD:=$(call AutoProbe,gigaset bas_gigaset ser_gigaset usb_gigaset)
-endef
-
-define KernelPackage/gigaset/description
- This driver supports the Siemens Gigaset SX205/255 family of
- ISDN DECT bases, including the predecessors Gigaset 3070/3075
- and 4170/4175 and their T-Com versions Sinus 45isdn and Sinus
- 721X.
-endef
-
-$(eval $(call KernelPackage,gigaset))
-
-
define KernelPackage/macvlan
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=MAC-VLAN support
$(eval $(call KernelPackage,macvlan))
+define KernelPackage/ipvlan
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=IP-VLAN support
+ KCONFIG:=CONFIG_IPVLAN
+ FILES:=$(LINUX_DIR)/drivers/net/ipvlan/ipvlan.ko
+ AUTOLOAD:=$(call AutoProbe,ipvlan)
+endef
+
+define KernelPackage/ipvlan/description
+ A kernel module which allows one to create virtual interfaces that
+ map packets to or from specific IP addresses to a particular interface
+endef
+
+$(eval $(call KernelPackage,ipvlan))
+
+
define KernelPackage/tulip
TITLE:=Tulip family network device support
DEPENDS:=@PCI_SUPPORT +kmod-mii
$(eval $(call KernelPackage,forcedeth))
+define KernelPackage/fixed-phy
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=MDIO Bus/PHY emulation with fixed speed/link PHYs
+ DEPENDS:=+kmod-libphy
+ KCONFIG:=CONFIG_FIXED_PHY
+ FILES:=$(LINUX_DIR)/drivers/net/phy/fixed_phy.ko
+ AUTOLOAD:=$(call AutoProbe,fixed_phy)
+endef
+
+define KernelPackage/fixed-phy/description
+ Kernel driver for "fixed" MDIO Bus to cover the boards
+ and devices that use PHYs that are not connected to the real MDIO bus.
+endef
+
+$(eval $(call KernelPackage,fixed-phy))
+
define KernelPackage/of-mdio
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=OpenFirmware MDIO support
- DEPENDS:=+kmod-libphy
+ DEPENDS:=+kmod-libphy +kmod-fixed-phy @!TARGET_x86
KCONFIG:=CONFIG_OF_MDIO
FILES:= \
- $(LINUX_DIR)/drivers/net/phy/fixed_phy.ko \
- $(LINUX_DIR)/drivers/of/of_mdio.ko
+ $(LINUX_DIR)/drivers/net/mdio/of_mdio.ko \
+ $(LINUX_DIR)/drivers/net/mdio/fwnode_mdio.ko@ge5.15
AUTOLOAD:=$(call AutoLoad,41,of_mdio)
endef
$(eval $(call KernelPackage,mlx5-core))
+define KernelPackage/net-selftests
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ DEPENDS:=+kmod-libphy
+ TITLE:=Network generic selftest support
+ KCONFIG:=CONFIG_NET_SELFTESTS
+ FILES:=$(LINUX_DIR)/net/core/selftests.ko
+ AUTOLOAD:=$(call AutoLoad,99,selftests)
+endef
+
+define KernelPackage/net-selftests/description
+ Kernel modules for the generic selftest support
+endef
+
+$(eval $(call KernelPackage,net-selftests))
+
+
+define KernelPackage/qlcnic
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ DEPENDS:=@PCI_SUPPORT +kmod-hwmon-core
+ TITLE:=QLogic QLE8240 and QLE8242 device support
+ KCONFIG:= \
+ CONFIG_QLCNIC \
+ CONFIG_QLCNIC_HWMON=y \
+ CONFIG_QLCNIC_SRIOV=y
+ FILES:=$(LINUX_DIR)/drivers/net/ethernet/qlogic/qlcnic/qlcnic.ko
+ AUTOLOAD:=$(call AutoProbe,qlcnic)
+endef
+
+define KernelPackage/qlcnic/description
+ This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
+ devices.
+endef
+
+$(eval $(call KernelPackage,qlcnic))
+
+
define KernelPackage/sfp
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=SFP cage support
CONFIG_MDIO_I2C
FILES:= \
$(LINUX_DIR)/drivers/net/phy/sfp.ko \
- $(LINUX_DIR)/drivers/net/phy/mdio-i2c.ko
+ $(LINUX_DIR)/drivers/net/mdio/mdio-i2c.ko
AUTOLOAD:=$(call AutoProbe,mdio-i2c sfp)
endef
endef
$(eval $(call KernelPackage,sfp))
+
+define KernelPackage/igc
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=Intel(R) Ethernet Controller I225 Series support
+ DEPENDS:=@PCI_SUPPORT +kmod-ptp
+ KCONFIG:=CONFIG_IGC
+ FILES:=$(LINUX_DIR)/drivers/net/ethernet/intel/igc/igc.ko
+ AUTOLOAD:=$(call AutoProbe,igc)
+endef
+
+define KernelPackage/igc/description
+ Kernel modules for Intel(R) Ethernet Controller I225 Series
+endef
+
+$(eval $(call KernelPackage,igc))
+
+define KernelPackage/sfc
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=Solarflare SFC9000/SFC9100/EF100-family support
+ DEPENDS:=@PCI_SUPPORT +kmod-mdio +kmod-lib-crc32c +kmod-ptp +kmod-hwmon-core
+ KCONFIG:= \
+ CONFIG_SFC \
+ CONFIG_SFC_MTD=y \
+ CONFIG_SFC_MCDI_MON=y \
+ CONFIG_SFC_MCDI_LOGGING=y \
+ CONFIG_SFC_SRIOV=y
+ FILES:=$(LINUX_DIR)/drivers/net/ethernet/sfc/sfc.ko
+ AUTOLOAD:=$(call AutoProbe,sfc)
+endef
+
+define KernelPackage/sfc/description
+ Solarflare SFC9000/SFC9100/EF100-family support
+ Solarflare EF100 support requires at least kernel version 5.9
+endef
+
+$(eval $(call KernelPackage,sfc))
+
+define KernelPackage/sfc-falcon
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=Solarflare SFC4000 support
+ DEPENDS:=@PCI_SUPPORT +kmod-mdio +kmod-lib-crc32c +kmod-i2c-algo-bit
+ KCONFIG:= \
+ CONFIG_SFC_FALCON \
+ CONFIG_SFC_FALCON_MTD=y
+ FILES:=$(LINUX_DIR)/drivers/net/ethernet/sfc/falcon/sfc-falcon.ko
+ AUTOLOAD:=$(call AutoProbe,sfc-falcon)
+endef
+
+define KernelPackage/sfc-falcon/description
+ Solarflare SFC4000 support
+endef
+
+$(eval $(call KernelPackage,sfc-falcon))
+
+
+define KernelPackage/wwan
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=WWAN Driver Core
+ DEPENDS:=@LINUX_5_15
+ KCONFIG:=CONFIG_WWAN
+ FILES:=$(LINUX_DIR)/drivers/net/wwan/wwan.ko
+ AUTOLOAD:=$(call AutoProbe,wwan)
+endef
+
+define KernelPackage/wwan/description
+ his driver provides a common framework for WWAN drivers.
+endef
+
+$(eval $(call KernelPackage,wwan))
+
+
+define KernelPackage/mhi-net
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=MHI Network Device
+ DEPENDS:=@LINUX_5_15 @PCI_SUPPORT +kmod-mhi-bus
+ KCONFIG:=CONFIG_MHI_NET
+ FILES:=$(LINUX_DIR)/drivers/net/mhi_net.ko
+ AUTOLOAD:=$(call AutoProbe,mhi_net)
+endef
+
+define KernelPackage/mhi-net/description
+ Driver for MHI network interface
+endef
+
+$(eval $(call KernelPackage,mhi-net))
+
+define KernelPackage/mhi-wwan-ctrl
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=MHI WWAN Control
+ DEPENDS:=@LINUX_5_15 @PCI_SUPPORT +kmod-mhi-bus +kmod-wwan
+ KCONFIG:=CONFIG_MHI_WWAN_CTRL
+ FILES:=$(LINUX_DIR)/drivers/net/wwan/mhi_wwan_ctrl.ko
+ AUTOLOAD:=$(call AutoProbe,mhi_wwan_ctrl)
+endef
+
+define KernelPackage/mhi-wwan-ctrl/description
+ Driver for MHI WWAN Control
+ This exposes all modem control ports like AT, MBIM, QMI, DIAG, ..
+endef
+
+$(eval $(call KernelPackage,mhi-wwan-ctrl))
+
+define KernelPackage/mhi-wwan-mbim
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=MHI MBIM
+ DEPENDS:=@LINUX_5_15 @PCI_SUPPORT +kmod-mhi-bus +kmod-wwan
+ KCONFIG:=CONFIG_MHI_WWAN_MBIM
+ FILES:=$(LINUX_DIR)/drivers/net/wwan/mhi_wwan_mbim.ko
+ AUTOLOAD:=$(call AutoProbe,mhi_wwan_mbim)
+endef
+
+define KernelPackage/mhi-wwan-mbim/description
+ Driver for MHI MBIM
+ This implements MBIM over MHI
+endef
+
+$(eval $(call KernelPackage,mhi-wwan-mbim))
projects / openwrt / openwrt.git / blobdiff