$(eval $(call KernelPackage,usb-phy-nop))
-define KernelPackage/usb-phy-qcom-dwc3
- TITLE:=DWC3 USB QCOM PHY driver
- DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x)
- KCONFIG:= CONFIG_PHY_QCOM_DWC3
- FILES:= \
- $(LINUX_DIR)/drivers/phy/qualcomm/phy-qcom-dwc3.ko
- AUTOLOAD:=$(call AutoLoad,45,phy-qcom-dwc3,1)
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-phy-qcom-dwc3/description
- This driver provides support for the integrated DesignWare
- USB3 IP Core within the QCOM SoCs.
-endef
-
-$(eval $(call KernelPackage,usb-phy-qcom-dwc3))
-
-
define KernelPackage/phy-ath79-usb
TITLE:=Support for ATH79 USB PHY
KCONFIG:=CONFIG_PHY_AR7100_USB \
$(eval $(call KernelPackage,usb-gadget-eth))
+define KernelPackage/usb-gadget-ncm
+ TITLE:=USB Network Control Model (NCM) Gadget support
+ KCONFIG:=CONFIG_USB_G_NCM
+ DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite \
+ +kmod-usb-gadget-eth
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_ncm.ko \
+ $(LINUX_DIR)/drivers/usb/gadget/legacy/g_ncm.ko
+ AUTOLOAD:=$(call AutoLoad,52,usb_f_ncm)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-gadget-ncm/description
+ Kernel support for USB Network Control Model (NCM) Gadget
+endef
+
+$(eval $(call KernelPackage,usb-gadget-ncm))
define KernelPackage/usb-gadget-serial
TITLE:=USB Serial Gadget support
define KernelPackage/usb-dwc2
TITLE:=DWC2 USB controller driver
- DEPENDS:=+USB_GADGET_SUPPORT:kmod-usb-gadget
+ DEPENDS:=+USB_GADGET_SUPPORT:kmod-usb-gadget +kmod-usb-roles
KCONFIG:= \
- CONFIG_USB_PCI=y \
CONFIG_USB_DWC2 \
- CONFIG_USB_DWC2_PCI \
- CONFIG_USB_DWC2_PLATFORM \
CONFIG_USB_DWC2_DEBUG=n \
CONFIG_USB_DWC2_VERBOSE=n \
CONFIG_USB_DWC2_TRACK_MISSED_SOFS=n \
$(eval $(call KernelPackage,usb-dwc2))
+define KernelPackage/usb-dwc2-pci
+ TITLE:=DWC2 USB controller driver (PCI)
+ DEPENDS:=@PCI_SUPPORT +kmod-usb-dwc2 +kmod-usb-phy-nop
+ KCONFIG:= \
+ CONFIG_USB_PCI=y \
+ CONFIG_USB_DWC2_PCI
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/dwc2/dwc2_pci.ko
+ AUTOLOAD:=$(call AutoLoad,54,dwc2_pci,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-dwc2-pci/description
+ The Designware USB2.0 PCI interface module for controllers
+ connected to a PCI bus.
+endef
+
+$(eval $(call KernelPackage,usb-dwc2-pci))
+
+
define KernelPackage/usb-dwc3
TITLE:=DWC3 USB controller driver
KCONFIG:= \
$(eval $(call KernelPackage,usb-dwc3))
-define KernelPackage/usb-dwc3-of-simple
- TITLE:=DWC3 USB simple OF driver
- DEPENDS:=@LINUX_4_14 @(TARGET_ipq40xx||TARGET_ipq806x) +kmod-usb-dwc3
- KCONFIG:= CONFIG_USB_DWC3_OF_SIMPLE
- FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3-of-simple.ko
- AUTOLOAD:=$(call AutoLoad,53,dwc3-of-simple,1)
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-dwc3-of-simple/description
- This driver provides generic platform glue for the integrated DesignWare
- USB3 IP Core.
-endef
-
-
-$(eval $(call KernelPackage,usb-dwc3-of-simple))
-
-
define KernelPackage/usb-dwc3-qcom
TITLE:=DWC3 Qualcomm USB driver
- DEPENDS:=@!LINUX_4_14 @(TARGET_ipq40xx||TARGET_ipq806x) +kmod-usb-dwc3
+ DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x||TARGET_ipq807x) +kmod-usb-dwc3
KCONFIG:= CONFIG_USB_DWC3_QCOM
FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3-qcom.ko
AUTOLOAD:=$(call AutoLoad,53,dwc3-qcom,1)
define AddDepends/usb-serial
SUBMENU:=$(USB_MENU)
- DEPENDS+=kmod-usb-serial $(1)
+ DEPENDS+=+kmod-usb-serial $(1)
endef
define AddDepends/usb-net
SUBMENU:=$(USB_MENU)
- DEPENDS+=kmod-usb-net $(1)
+ DEPENDS+=+kmod-usb-net $(1)
+endef
+
+
+define KernelPackage/usb-net-aqc111
+ TITLE:=Support for USB-to-Ethernet Aquantia AQtion 5/2.5GbE
+ KCONFIG:=CONFIG_USB_NET_AQC111
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/aqc111.ko
+ AUTOLOAD:=$(call AutoProbe,aqc111)
+ $(call AddDepends/usb-net)
endef
+define KernelPackage/usb-net-aqc111/description
+ Support for USB-to-Ethernet Aquantia AQtion 5/2.5GbE
+endef
+
+$(eval $(call KernelPackage,usb-net-aqc111))
+
define KernelPackage/usb-net-asix
TITLE:=Kernel module for USB-to-Ethernet Asix convertors
- DEPENDS:=+kmod-libphy
+ DEPENDS:=+kmod-libphy +LINUX_5_15:kmod-net-selftests +LINUX_5_15:kmod-mdio-devres +kmod-phy-ax88796b
KCONFIG:=CONFIG_USB_NET_AX8817X
FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/asix.ko
AUTOLOAD:=$(call AutoProbe,asix)
$(eval $(call KernelPackage,usb-net-kaweth))
+define KernelPackage/usb-net-lan78xx
+ TITLE:=USB-To-Ethernet Microchip LAN78XX convertors
+ DEPENDS:=+kmod-fixed-phy +kmod-phy-microchip +PACKAGE_kmod-of-mdio:kmod-of-mdio
+ KCONFIG:=CONFIG_USB_LAN78XX
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/lan78xx.ko
+ AUTOLOAD:=$(call AutoProbe,lan78xx)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-lan78xx/description
+ Kernel module for Microchip LAN78XX based USB 2 & USB 3
+ 10/100/1000 Ethernet adapters.
+endef
+
+$(eval $(call KernelPackage,usb-net-lan78xx))
+
+
define KernelPackage/usb-net-pegasus
TITLE:=Kernel module for USB-to-Ethernet Pegasus convertors
KCONFIG:=CONFIG_USB_PEGASUS
$(eval $(call KernelPackage,usb-net-mcs7830))
+define KernelPackage/usb-net-smsc75xx
+ TITLE:=SMSC LAN75XX based USB 2.0 Gigabit ethernet devices
+ DEPENDS:=+kmod-libphy
+ KCONFIG:=CONFIG_USB_NET_SMSC75XX
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/smsc75xx.ko
+ AUTOLOAD:=$(call AutoProbe,smsc75xx)
+ $(call AddDepends/usb-net, +kmod-lib-crc16)
+endef
+
+define KernelPackage/usb-net-smsc75xx/description
+ Kernel module for SMSC LAN75XX based devices
+endef
+
+$(eval $(call KernelPackage,usb-net-smsc75xx))
+
+
define KernelPackage/usb-net-smsc95xx
TITLE:=SMSC LAN95XX based USB 2.0 10/100 ethernet devices
+ DEPENDS:=+kmod-libphy +kmod-phy-smsc
KCONFIG:=CONFIG_USB_NET_SMSC95XX
FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/smsc95xx.ko
AUTOLOAD:=$(call AutoProbe,smsc95xx)
define KernelPackage/usb-net-rtl8152
TITLE:=Kernel module for USB-to-Ethernet Realtek convertors
+ DEPENDS:=+r8152-firmware +kmod-crypto-sha256 +kmod-usb-net-cdc-ncm
KCONFIG:=CONFIG_USB_RTL8152
FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/r8152.ko
AUTOLOAD:=$(call AutoProbe,r8152)
- $(call AddDepends/usb-net)
+ $(call AddDepends/usb-net, +LINUX_5_10:kmod-crypto-hash)
endef
define KernelPackage/usb-net-rtl8152/description
KCONFIG:=CONFIG_USB_NET_CDC_NCM
FILES:= $(LINUX_DIR)/drivers/$(USBNET_DIR)/cdc_ncm.ko
AUTOLOAD:=$(call AutoProbe,cdc_ncm)
- $(call AddDepends/usb-net)
+ $(call AddDepends/usb-net,+kmod-usb-net-cdc-ether)
endef
define KernelPackage/usb-net-cdc-ncm/description
$(eval $(call KernelPackage,usb-hid))
+define KernelPackage/usb-hid-cp2112
+ SUBMENU:=$(USB_MENU)
+ TITLE:=Silicon Labs CP2112 HID USB to SMBus Master Bridge
+ KCONFIG:=CONFIG_HID_CP2112
+ DEPENDS:=@GPIO_SUPPORT +kmod-usb-hid +kmod-i2c-core
+ FILES:=$(LINUX_DIR)/drivers/hid/hid-cp2112.ko
+ AUTOLOAD:=$(call AutoProbe,hid-cp2112)
+endef
+
+define KernelPackage/usb-hid-cp2112/description
+ HID device driver which registers as an i2c adapter and gpiochip to expose
+ these functions of the CP2112.
+endef
+
+$(eval $(call KernelPackage,usb-hid-cp2112))
+
+
+define KernelPackage/usb-hid-mcp2221
+ SUBMENU:=$(USB_MENU)
+ TITLE:=Microchip USB 2.0 to I2C/UART Protocol Converter with GPIO
+ KCONFIG:=CONFIG_HID_MCP2221
+ DEPENDS:=@GPIO_SUPPORT +kmod-usb-hid +kmod-i2c-core
+ FILES:=$(LINUX_DIR)/drivers/hid/hid-mcp2221.ko
+ AUTOLOAD:=$(call AutoProbe,hid-mcp2221)
+endef
+
+define KernelPackage/usb-hid-mcp2221/description
+ HID device driver which registers as an i2c adapter and gpiochip to expose
+ these functions of the MCP2221.
+endef
+
+$(eval $(call KernelPackage,usb-hid-mcp2221))
+
+
define KernelPackage/usb-yealink
TITLE:=USB Yealink VOIP phone
DEPENDS:=+kmod-input-evdev
$(eval $(call KernelPackage,usbip-server))
-
define KernelPackage/usb-chipidea
TITLE:=Host and device support for Chipidea controllers
- DEPENDS:=+USB_GADGET_SUPPORT:kmod-usb-gadget @TARGET_ar71xx||TARGET_ath79 +kmod-usb-ehci +kmod-usb-phy-nop
+ DEPENDS:=+USB_GADGET_SUPPORT:kmod-usb-gadget @TARGET_ath79 +kmod-usb-ehci +kmod-usb-phy-nop +kmod-usb-roles
KCONFIG:= \
CONFIG_EXTCON \
CONFIG_USB_CHIPIDEA \
+ CONFIG_USB_CHIPIDEA_GENERIC \
CONFIG_USB_CHIPIDEA_HOST=y \
CONFIG_USB_CHIPIDEA_UDC=y \
CONFIG_USB_CHIPIDEA_DEBUG=y
FILES:= \
$(LINUX_DIR)/drivers/extcon/extcon-core.ko \
$(LINUX_DIR)/drivers/usb/chipidea/ci_hdrc.ko \
- $(LINUX_DIR)/drivers/usb/common/ulpi.ko@ge4.18 \
- $(LINUX_DIR)/drivers/usb/roles/roles.ko@ge5.0
+ $(LINUX_DIR)/drivers/usb/common/ulpi.ko
AUTOLOAD:=$(call AutoLoad,39,ci_hdrc,1)
$(call AddDepends/usb)
endef
$(eval $(call KernelPackage,usbmon))
-XHCI_MODULES := xhci-hcd xhci-pci xhci-plat-hcd
-ifdef CONFIG_TARGET_ramips_mt7621
- XHCI_MODULES += xhci-mtk
-endif
+XHCI_MODULES := xhci-pci xhci-plat-hcd
XHCI_FILES := $(wildcard $(patsubst %,$(LINUX_DIR)/drivers/usb/host/%.ko,$(XHCI_MODULES)))
XHCI_AUTOLOAD := $(patsubst $(LINUX_DIR)/drivers/usb/host/%.ko,%,$(XHCI_FILES))
define KernelPackage/usb3
TITLE:=Support for USB3 controllers
DEPENDS:= \
+ +kmod-usb-xhci-hcd \
+TARGET_bcm53xx:kmod-usb-bcma \
- +TARGET_bcm53xx:kmod-phy-bcm-ns-usb3
+ +TARGET_bcm53xx:kmod-phy-bcm-ns-usb3 \
+ +TARGET_ramips_mt7621:kmod-usb-xhci-mtk \
+ +TARGET_mediatek:kmod-usb-xhci-mtk \
+ +TARGET_apm821xx_nand:kmod-usb-xhci-pci-renesas \
+ +TARGET_mvebu_cortexa9:kmod-usb-xhci-pci-renesas
KCONFIG:= \
CONFIG_USB_PCI=y \
- CONFIG_USB_XHCI_HCD \
CONFIG_USB_XHCI_PCI \
- CONFIG_USB_XHCI_PLATFORM \
- CONFIG_USB_XHCI_MTK \
- CONFIG_USB_XHCI_HCD_DEBUGGING=n
+ CONFIG_USB_XHCI_PLATFORM
FILES:= \
$(XHCI_FILES)
AUTOLOAD:=$(call AutoLoad,54,$(XHCI_AUTOLOAD),1)
$(eval $(call KernelPackage,usb-net2280))
+define KernelPackage/usb-roles
+ TITLE:=USB Role Switch Library Module
+ KCONFIG:=CONFIG_USB_ROLE_SWITCH
+ HIDDEN:=1
+ FILES:=$(LINUX_DIR)/drivers/usb/roles/roles.ko
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-roles/description
+ Support for USB Role Switch
+endef
+
+$(eval $(call KernelPackage,usb-roles))
+
+
+define KernelPackage/usb-xhci-hcd
+ TITLE:=xHCI HCD (USB 3.0) support
+ KCONFIG:= \
+ CONFIG_USB_XHCI_HCD \
+ CONFIG_USB_XHCI_HCD_DEBUGGING=n
+ HIDDEN:=1
+ FILES:=$(LINUX_DIR)/drivers/usb/host/xhci-hcd.ko
+ AUTOLOAD:=$(call AutoLoad,54,xhci-hcd,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-xhci-hcd/description
+ The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
+ "SuperSpeed" host controller hardware.
+endef
+
+$(eval $(call KernelPackage,usb-xhci-hcd))
+
+
+define KernelPackage/usb-xhci-mtk
+ TITLE:=xHCI support for MediaTek SoCs
+ DEPENDS:=+kmod-usb-xhci-hcd
+ KCONFIG:=CONFIG_USB_XHCI_MTK
+ HIDDEN:=1
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/host/xhci-mtk-hcd.ko
+ AUTOLOAD:=$(call AutoLoad,54,xhci-mtk-hcd,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-xhci-mtk/description
+ Kernel support for the xHCI host controller found in MediaTek SoCs.
+endef
+
+$(eval $(call KernelPackage,usb-xhci-mtk))
+
+
+define KernelPackage/usb-xhci-pci-renesas
+ TITLE:=Support for additional Renesas xHCI controller with firmware
+ KCONFIG:=CONFIG_USB_XHCI_PCI_RENESAS
+ HIDDEN:=1
+ FILES:=$(LINUX_DIR)/drivers/usb/host/xhci-pci-renesas.ko
+ AUTOLOAD:=$(call AutoLoad,54,xhci-pci-renesas,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-xhci-pci-renesas/description
+ Kernel support for the Renesas xHCI controller with firmware. Make sure you have
+ the firwmare for the device and installed on your system for this device to work.
+endef
+
+$(eval $(call KernelPackage,usb-xhci-pci-renesas))
+
+
define KernelPackage/chaoskey
SUBMENU:=$(USB_MENU)
TITLE:=Chaoskey hardware RNG support
projects / openwrt / openwrt.git / blobdiff