MP_CONFIG_BOOL="mesh_auto_open_plinks mesh_fwding"
MP_CONFIG_STRING="mesh_power_mode"
-NEWAPLIST=
-OLDAPLIST=
-NEWSPLIST=
-OLDSPLIST=
-NEWUMLIST=
-OLDUMLIST=
+wdev_tool() {
+ ucode /usr/share/hostap/wdev.uc "$@"
+}
drv_mac80211_init_device_config() {
hostapd_common_add_device_config
has_ap=1
}
-mac80211_iw_interface_add() {
- local phy="$1"
- local ifname="$2"
- local type="$3"
- local wdsflag="$4"
- local rc
- local oldifname
-
- iw phy "$phy" interface add "$ifname" type "$type" $wdsflag >/dev/null 2>&1
- rc="$?"
-
- [ "$rc" = 233 ] && {
- # Device might have just been deleted, give the kernel some time to finish cleaning it up
- sleep 1
-
- iw phy "$phy" interface add "$ifname" type "$type" $wdsflag >/dev/null 2>&1
- rc="$?"
- }
-
- [ "$rc" = 233 ] && {
- # Keep matching pre-existing interface
- [ -d "/sys/class/ieee80211/${phy}/device/net/${ifname}" ] && \
- case "$(iw dev $ifname info | grep "^\ttype" | cut -d' ' -f2- 2>/dev/null)" in
- "AP")
- [ "$type" = "__ap" ] && rc=0
- ;;
- "IBSS")
- [ "$type" = "adhoc" ] && rc=0
- ;;
- "managed")
- [ "$type" = "managed" ] && rc=0
- ;;
- "mesh point")
- [ "$type" = "mp" ] && rc=0
- ;;
- "monitor")
- [ "$type" = "monitor" ] && rc=0
- ;;
- esac
- }
-
- [ "$rc" = 233 ] && {
- iw dev "$ifname" del >/dev/null 2>&1
- [ "$?" = 0 ] && {
- sleep 1
-
- iw phy "$phy" interface add "$ifname" type "$type" $wdsflag >/dev/null 2>&1
- rc="$?"
- }
- }
-
- [ "$rc" != 0 ] && {
- # Device might not support virtual interfaces, so the interface never got deleted in the first place.
- # Check if the interface already exists, and avoid failing in this case.
- [ -d "/sys/class/ieee80211/${phy}/device/net/${ifname}" ] && rc=0
- }
-
- [ "$rc" != 0 ] && {
- # Device doesn't support virtual interfaces and may have existing interface other than ifname.
- oldifname="$(basename "/sys/class/ieee80211/${phy}/device/net"/* 2>/dev/null)"
- [ "$oldifname" ] && ip link set "$oldifname" name "$ifname" 1>/dev/null 2>&1
- rc="$?"
- }
-
- [ "$rc" != 0 ] && echo "Failed to create interface $ifname"
- return $rc
-}
-
mac80211_set_ifname() {
local phy="$1"
local prefix="$2"
mac80211_set_ifname "$phy" "$prefix"
}
+ append active_ifnames "$ifname"
set_default wds 0
set_default powersave 0
-
- json_select ..
+ json_add_string _ifname "$ifname"
if [ -z "$macaddr" ]; then
macaddr="$(mac80211_generate_mac $phy)"
elif [ "$macaddr" = 'random' ]; then
macaddr="$(macaddr_random)"
fi
+ json_add_string _macaddr "$macaddr"
+ json_select ..
- json_add_object data
- json_add_string ifname "$ifname"
- json_close_object
[ "$mode" == "ap" ] && {
[ -z "$wpa_psk_file" ] && hostapd_set_psk "$ifname"
# It is far easier to delete and create the desired interface
case "$mode" in
- adhoc)
- mac80211_iw_interface_add "$phy" "$ifname" adhoc || return
- ;;
ap)
# Hostapd will handle recreating the interface and
# subsequent virtual APs belonging to the same PHY
mac80211_hostapd_setup_bss "$phy" "$ifname" "$macaddr" "$type" || return
- NEWAPLIST="${NEWAPLIST}$ifname "
[ -n "$hostapd_ctrl" ] || {
ap_ifname="${ifname}"
hostapd_ctrl="${hostapd_ctrl:-/var/run/hostapd/$ifname}"
}
;;
- mesh)
- mac80211_iw_interface_add "$phy" "$ifname" mp || return
- ;;
- monitor)
- mac80211_iw_interface_add "$phy" "$ifname" monitor || return
- ;;
- sta)
- local wdsflag=
- [ "$enable" = 0 ] || staidx="$(($staidx + 1))"
- [ "$wds" -gt 0 ] && wdsflag="4addr on"
- mac80211_iw_interface_add "$phy" "$ifname" managed "$wdsflag" || return
- if [ "$wds" -gt 0 ]; then
- iw "$ifname" set 4addr on
- else
- iw "$ifname" set 4addr off
- fi
- [ "$powersave" -gt 0 ] && powersave="on" || powersave="off"
- iw "$ifname" set power_save "$powersave"
- ;;
esac
- case "$mode" in
- monitor|mesh)
- [ "$auto_channel" -gt 0 ] || iw dev "$ifname" set channel "$channel" $iw_htmode
- ;;
- esac
-
- if [ "$mode" != "ap" ]; then
- # ALL ap functionality will be passed to hostapd
- # All interfaces must have unique mac addresses
- # which can either be explicitly set in the device
- # section, or automatically generated
- ip link set dev "$ifname" address "$macaddr"
- fi
-
json_select ..
}
-mac80211_setup_supplicant() {
- local enable=$1
- local add_sp=0
- local spobj="$(ubus -S list | grep wpa_supplicant.${ifname})"
-
- [ "$enable" = 0 ] && {
- ubus call wpa_supplicant.${phy} config_remove "{\"iface\":\"$ifname\"}"
- ip link set dev "$ifname" down
- iw dev "$ifname" del
- return 0
- }
-
- wpa_supplicant_prepare_interface "$ifname" nl80211 || {
- iw dev "$ifname" del
- return 1
- }
- if [ "$mode" = "sta" ]; then
- wpa_supplicant_add_network "$ifname"
- else
- wpa_supplicant_add_network "$ifname" "$freq" "$htmode" "$noscan"
- fi
-
- NEWSPLIST="${NEWSPLIST}$ifname "
-
- if [ "${NEWAPLIST%% *}" != "${OLDAPLIST%% *}" ]; then
- [ "$spobj" ] && ubus call wpa_supplicant config_remove "{\"iface\":\"$ifname\"}"
- add_sp=1
- fi
- [ -z "$spobj" ] && add_sp=1
-
- NEW_MD5_SP=$(test -e "${_config}" && md5sum ${_config})
- OLD_MD5_SP=$(uci -q -P /var/state get wireless._${phy}.md5_${ifname})
- if [ "$add_sp" = "1" ]; then
- wpa_supplicant_run "$ifname" "$hostapd_ctrl"
- else
- [ "${NEW_MD5_SP}" == "${OLD_MD5_SP}" ] || ubus call $spobj reload
- fi
- uci -q -P /var/state set wireless._${phy}.md5_${ifname}="${NEW_MD5_SP}"
- return 0
-}
-
-mac80211_setup_supplicant_noctl() {
- local enable=$1
- local spobj="$(ubus -S list | grep wpa_supplicant.${ifname})"
- wpa_supplicant_prepare_interface "$ifname" nl80211 || {
- iw dev "$ifname" del
- return 1
- }
-
- wpa_supplicant_add_network "$ifname" "$freq" "$htmode" "$noscan"
-
- NEWSPLIST="${NEWSPLIST}$ifname "
- [ "$enable" = 0 ] && {
- ubus call wpa_supplicant config_remove "{\"iface\":\"$ifname\"}"
- ip link set dev "$ifname" down
- return 0
- }
- if [ -z "$spobj" ]; then
- wpa_supplicant_run "$ifname"
- else
- ubus call $spobj reload
- fi
-}
-
mac80211_prepare_iw_htmode() {
case "$htmode" in
VHT20|HT20|HE20) iw_htmode=HT20;;
esac
}
+mac80211_add_mesh_params() {
+ for var in $MP_CONFIG_INT $MP_CONFIG_BOOL $MP_CONFIG_STRING; do
+ eval "mp_val=\"\$var\""
+ [ -n "$mp_val" ] && json_add_string "$var" "$mp_val"
+ done
+}
+
mac80211_setup_adhoc() {
local enable=$1
json_get_vars bssid ssid key mcast_rate
mcval=
[ -n "$mcast_rate" ] && wpa_supplicant_add_rate mcval "$mcast_rate"
- iw dev "$ifname" set type ibss
- iw dev "$ifname" ibss join "$ssid" $freq $iw_htmode fixed-freq $bssid \
- beacon-interval $beacon_int \
- ${brstr:+basic-rates $brstr} \
- ${mcval:+mcast-rate $mcval} \
- ${keyspec:+keys $keyspec}
+ local prev
+ json_set_namespace wdev_uc prev
+
+ json_add_object "$ifname"
+ json_add_string mode adhoc
+ json_add_string macaddr "$macaddr"
+ json_add_string ssid "$ssid"
+ json_add_string freq "$freq"
+ json_add_string htmode "$iw_htmode"
+ [ -n "$bssid" ] && json_add_string bssid "$bssid"
+ json_add_int beacon-interval "$beacon_int"
+ [ -n "$brstr" ] && json_add_string basic-rates "$brstr"
+ [ -n "$mcval" ] && json_add_string mcast-rate "$mcval"
+ [ -n "$keyspec" ] && json_add_string keys "$keyspec"
+ json_close_object
+
+ json_set_namespace "$prev"
}
mac80211_setup_mesh() {
- local enable=$1
json_get_vars ssid mesh_id mcast_rate
- NEWUMLIST="${NEWUMLIST}$ifname "
-
- [ "$enable" = 0 ] && {
- ip link set dev "$ifname" down
- return 0
- }
-
mcval=
[ -n "$mcast_rate" ] && wpa_supplicant_add_rate mcval "$mcast_rate"
[ -n "$mesh_id" ] && ssid="$mesh_id"
- iw dev "$ifname" mesh join "$ssid" freq $freq $iw_htmode \
- ${mcval:+mcast-rate $mcval} \
- beacon-interval $beacon_int
+ local prev
+ json_set_namespace wdev_uc prev
+
+ json_add_object "$ifname"
+ json_add_string mode mesh
+ json_add_string macaddr "$macaddr"
+ json_add_string ssid "$ssid"
+ json_add_string freq "$freq"
+ json_add_string htmode "$iw_htmode"
+ [ -n "$mcval" ] && json_add_string mcast-rate "$mcval"
+ json_add_int beacon-interval "$beacon_int"
+ mac80211_add_mesh_params
+
+ json_close_object
+
+ json_set_namespace "$prev"
}
-mac80211_setup_vif() {
+mac80211_setup_monitor() {
+ local prev
+ json_set_namespace wdev_uc prev
+
+ json_add_object "$ifname"
+ json_add_string mode monitor
+ [ -n "$freq" ] && json_add_string freq "$freq"
+ json_add_string htmode "$iw_htmode"
+ json_close_object
+
+ json_set_namespace "$prev"
+}
+
+mac80211_set_vif_txpower() {
local name="$1"
- local failed
- local action=up
- json_select data
- json_get_vars ifname
+ json_select config
+ json_get_var ifname _ifname
+ json_get_vars vif_txpower
json_select ..
- json_select config
- json_get_vars mode
- json_get_var vif_txpower
- json_get_var vif_enable enable 1
-
- [ "$vif_enable" = 1 ] || action=down
- if [ "$mode" != "ap" ] || [ "$ifname" = "$ap_ifname" ]; then
- ip link set dev "$ifname" "$action" || {
- wireless_setup_vif_failed IFUP_ERROR
- json_select ..
- return
- }
- [ -z "$vif_txpower" ] || iw dev "$ifname" set txpower fixed "${vif_txpower%%.*}00"
+ [ -z "$vif_txpower" ] || iw dev "$ifname" set txpower fixed "${vif_txpower%%.*}00"
+}
+
+wpa_supplicant_init_config() {
+ json_set_namespace wpa_supp prev
+
+ json_init
+ json_add_array config
+
+ json_set_namespace "$prev"
+}
+
+wpa_supplicant_add_interface() {
+ local ifname="$1"
+ local mode="$2"
+ local hostapd_ctrl="$3"
+ local prev
+
+ _wpa_supplicant_common "$ifname"
+
+ json_set_namespace wpa_supp prev
+
+ json_add_object
+ json_add_string ctrl "$_rpath"
+ json_add_string iface "$ifname"
+ json_add_string mode "$mode"
+ json_add_string config "$_config"
+ json_add_string macaddr "$macaddr"
+ [ -n "$network_bridge" ] && json_add_string bridge "$network_bridge"
+ [ -n "$hostapd_ctrl" ] && json_add_string hostapd_ctrl "$hostapd_ctrl"
+ [ -n "$wds" ] && json_add_boolean 4addr "$wds"
+ json_add_boolean powersave "$powersave"
+ [ "$mode" = "mesh" ] && mac80211_add_mesh_params
+ json_close_object
+
+ json_set_namespace "$prev"
+
+ wpa_supp_init=1
+}
+
+wpa_supplicant_set_config() {
+ local phy="$1"
+ local prev
+
+ json_set_namespace wpa_supp prev
+ json_close_array
+ json_add_string phy "$phy"
+ json_add_boolean defer 1
+ local data="$(json_dump)"
+
+ json_cleanup
+ json_set_namespace "$prev"
+
+ ubus -S -t 0 wait_for wpa_supplicant || {
+ [ -n "$wpa_supp_init" ] || return 0
+
+ ubus wait_for wpa_supplicant
+ }
+
+ local supplicant_res="$(ubus call wpa_supplicant config_set "$data")"
+ ret="$?"
+ [ "$ret" != 0 -o -z "$supplicant_res" ] && wireless_setup_vif_failed WPA_SUPPLICANT_FAILED
+
+ wireless_add_process "$(jsonfilter -s "$supplicant_res" -l 1 -e @.pid)" "/usr/sbin/wpa_supplicant" 1 1
+
+}
+
+hostapd_set_config() {
+ [ -n "$hostapd_ctrl" ] || {
+ ubus call hostapd config_set '{ "phy": "'"$phy"'", "config": "", "prev_config": "'"${hostapd_conf_file}.prev"'" }' > /dev/null
+ return 0;
+ }
+
+ ubus wait_for hostapd
+ local hostapd_res="$(ubus call hostapd config_set "{ \"phy\": \"$phy\", \"config\":\"${hostapd_conf_file}\", \"prev_config\": \"${hostapd_conf_file}.prev\"}")"
+ ret="$?"
+ [ "$ret" != 0 -o -z "$hostapd_res" ] && {
+ wireless_setup_failed HOSTAPD_START_FAILED
+ return
+ }
+ wireless_add_process "$(jsonfilter -s "$hostapd_res" -l 1 -e @.pid)" "/usr/sbin/hostapd" 1 1
+}
+
+
+wpa_supplicant_start() {
+ local phy="$1"
+
+ [ -n "$wpa_supp_init" ] || return 0
+
+ ubus call wpa_supplicant config_set '{ "phy": "'"$phy"'" }' > /dev/null
+}
+
+mac80211_setup_supplicant() {
+ local enable=$1
+ local add_sp=0
+
+ wpa_supplicant_prepare_interface "$ifname" nl80211 || return 1
+
+ if [ "$mode" = "sta" ]; then
+ wpa_supplicant_add_network "$ifname"
+ else
+ wpa_supplicant_add_network "$ifname" "$freq" "$htmode" "$noscan"
fi
+ wpa_supplicant_add_interface "$ifname" "$mode" "$hostapd_ctrl"
+
+ return 0
+}
+
+mac80211_setup_vif() {
+ local name="$1"
+ local failed
+
+ json_select config
+ json_get_var ifname _ifname
+ json_get_var macaddr _macaddr
+ json_get_vars mode wds powersave
+
+ set_default powersave 0
+ set_default wds 0
+
case "$mode" in
mesh)
+ json_get_vars $MP_CONFIG_INT $MP_CONFIG_BOOL $MP_CONFIG_STRING
wireless_vif_parse_encryption
[ -z "$htmode" ] && htmode="NOHT";
- if wpa_supplicant -vmesh || [ "$wpa" -gt 0 -o "$auto_channel" -gt 0 ] || chan_is_dfs "$phy" "$channel"; then
- mac80211_setup_supplicant $vif_enable || failed=1
+ if wpa_supplicant -vmesh; then
+ mac80211_setup_supplicant || failed=1
else
- mac80211_setup_mesh $vif_enable
+ mac80211_setup_mesh
fi
- for var in $MP_CONFIG_INT $MP_CONFIG_BOOL $MP_CONFIG_STRING; do
- json_get_var mp_val "$var"
- [ -n "$mp_val" ] && iw dev "$ifname" set mesh_param "$var" "$mp_val"
- done
;;
adhoc)
wireless_vif_parse_encryption
if [ "$wpa" -gt 0 -o "$auto_channel" -gt 0 ]; then
- mac80211_setup_supplicant_noctl $vif_enable || failed=1
+ mac80211_setup_supplicant || failed=1
else
- mac80211_setup_adhoc $vif_enable
+ mac80211_setup_adhoc
fi
;;
sta)
- mac80211_setup_supplicant $vif_enable || failed=1
+ mac80211_setup_supplicant || failed=1
+ ;;
+ monitor)
+ mac80211_setup_monitor
;;
esac
'
}
-
chan_is_dfs() {
local phy="$1"
local chan="$2"
return $!
}
-mac80211_vap_cleanup() {
- local service="$1"
- local vaps="$2"
-
- for wdev in $vaps; do
- [ "$service" != "none" ] && ubus call ${service} config_remove "{\"iface\":\"$wdev\"}"
- ip link set dev "$wdev" down 2>/dev/null
- iw dev "$wdev" del
- done
-}
-
-mac80211_interface_cleanup() {
- local phy="$1"
- local primary_ap=$(uci -q -P /var/state get wireless._${phy}.aplist)
- primary_ap=${primary_ap%% *}
-
- mac80211_vap_cleanup hostapd "${primary_ap}"
- mac80211_vap_cleanup wpa_supplicant "$(uci -q -P /var/state get wireless._${phy}.splist)"
- mac80211_vap_cleanup none "$(uci -q -P /var/state get wireless._${phy}.umlist)"
-}
-
mac80211_set_noscan() {
hostapd_noscan=1
}
hostapd_common_cleanup
}
+mac80211_reset_config() {
+ local phy="$1"
+
+ hostapd_conf_file="/var/run/hostapd-$phy.conf"
+ ubus call hostapd config_set '{ "phy": "'"$phy"'", "config": "", "prev_config": "'"$hostapd_conf_file"'" }' > /dev/null
+ ubus call wpa_supplicant config_set '{ "phy": "'"$phy"'", "config": [] }' > /dev/null
+ wdev_tool "$phy" '{}'
+}
+
drv_mac80211_setup() {
json_select config
json_get_vars \
}
wireless_set_data phy="$phy"
- [ -z "$(uci -q -P /var/state show wireless._${phy})" ] && uci -q -P /var/state set wireless._${phy}=phy
-
- OLDAPLIST=$(uci -q -P /var/state get wireless._${phy}.aplist)
- OLDSPLIST=$(uci -q -P /var/state get wireless._${phy}.splist)
- OLDUMLIST=$(uci -q -P /var/state get wireless._${phy}.umlist)
local wdev
local cwdev
local found
- for wdev in $(list_phy_interfaces "$phy"); do
- found=0
- for cwdev in $OLDAPLIST $OLDSPLIST $OLDUMLIST; do
- if [ "$wdev" = "$cwdev" ]; then
- found=1
- break
- fi
- done
- if [ "$found" = "0" ]; then
- ip link set dev "$wdev" down
- iw dev "$wdev" del
- fi
- done
-
# convert channel to frequency
[ "$auto_channel" -gt 0 ] || freq="$(get_freq "$phy" "$channel" "$band")"
hostapd_conf_file="/var/run/hostapd-$phy.conf"
- no_ap=1
macidx=0
staidx=0
hostapd_ctrl=
ap_ifname=
hostapd_noscan=
+ wpa_supp_init=
for_each_interface "ap" mac80211_check_ap
- rm -f "$hostapd_conf_file"
+ [ -f "$hostapd_conf_file" ] && mv "$hostapd_conf_file" "$hostapd_conf_file.prev"
for_each_interface "sta adhoc mesh" mac80211_set_noscan
[ -n "$has_ap" ] && mac80211_hostapd_setup_base "$phy"
- mac80211_prepare_iw_htmode
- for_each_interface "sta adhoc mesh monitor" mac80211_prepare_vif
- NEWAPLIST=
- for_each_interface "ap" mac80211_prepare_vif
- NEW_MD5=$(test -e "${hostapd_conf_file}" && md5sum ${hostapd_conf_file})
- OLD_MD5=$(uci -q -P /var/state get wireless._${phy}.md5)
- if [ "${NEWAPLIST}" != "${OLDAPLIST}" ]; then
- mac80211_vap_cleanup hostapd "${OLDAPLIST}"
- fi
- [ -n "${NEWAPLIST}" ] && mac80211_iw_interface_add "$phy" "${NEWAPLIST%% *}" __ap
- local add_ap=0
- local primary_ap=${NEWAPLIST%% *}
- [ -n "$hostapd_ctrl" ] && {
- local no_reload=1
- if [ -n "$(ubus list | grep hostapd.$primary_ap)" ]; then
- no_reload=0
- [ "${NEW_MD5}" = "${OLD_MD5}" ] || {
- ubus call hostapd.$primary_ap reload
- no_reload=$?
- if [ "$no_reload" != "0" ]; then
- mac80211_vap_cleanup hostapd "${OLDAPLIST}"
- mac80211_vap_cleanup wpa_supplicant "$(uci -q -P /var/state get wireless._${phy}.splist)"
- mac80211_vap_cleanup none "$(uci -q -P /var/state get wireless._${phy}.umlist)"
- sleep 2
- mac80211_iw_interface_add "$phy" "${NEWAPLIST%% *}" __ap
- for_each_interface "sta adhoc mesh monitor" mac80211_prepare_vif
- fi
- }
- fi
- if [ "$no_reload" != "0" ]; then
- add_ap=1
- ubus wait_for hostapd
- local hostapd_res="$(ubus call hostapd config_add "{\"iface\":\"$primary_ap\", \"config\":\"${hostapd_conf_file}\"}")"
- ret="$?"
- [ "$ret" != 0 -o -z "$hostapd_res" ] && {
- wireless_setup_failed HOSTAPD_START_FAILED
- return
- }
- wireless_add_process "$(jsonfilter -s "$hostapd_res" -l 1 -e @.pid)" "/usr/sbin/hostapd" 1 1
- fi
- }
- uci -q -P /var/state set wireless._${phy}.aplist="${NEWAPLIST}"
- uci -q -P /var/state set wireless._${phy}.md5="${NEW_MD5}"
+ local prev
+ json_set_namespace wdev_uc prev
+ json_init
+ json_set_namespace "$prev"
- [ "${add_ap}" = 1 ] && sleep 1
- for_each_interface "ap" mac80211_setup_vif
+ wpa_supplicant_init_config
- NEWSPLIST=
- NEWUMLIST=
+ mac80211_prepare_iw_htmode
+ active_ifnames=
+ for_each_interface "ap sta adhoc mesh monitor" mac80211_prepare_vif
+ for_each_interface "ap sta adhoc mesh monitor" mac80211_setup_vif
- for_each_interface "sta adhoc mesh monitor" mac80211_setup_vif
+ [ -x /usr/sbin/wpa_supplicant ] && wpa_supplicant_set_config "$phy"
+ [ -x /usr/sbin/hostapd ] && hostapd_set_config "$phy"
- uci -q -P /var/state set wireless._${phy}.splist="${NEWSPLIST}"
- uci -q -P /var/state set wireless._${phy}.umlist="${NEWUMLIST}"
+ [ -x /usr/sbin/wpa_supplicant ] && wpa_supplicant_start "$phy"
- local foundvap
- local dropvap=""
- for oldvap in $OLDSPLIST; do
- foundvap=0
- for newvap in $NEWSPLIST; do
- [ "$oldvap" = "$newvap" ] && foundvap=1
- done
- [ "$foundvap" = "0" ] && dropvap="$dropvap $oldvap"
- done
- [ -n "$dropvap" ] && mac80211_vap_cleanup wpa_supplicant "$dropvap"
+ json_set_namespace wdev_uc prev
+ wdev_tool "$phy" "$(json_dump)" $active_ifnames
+ json_set_namespace "$prev"
+
+ for_each_interface "ap sta adhoc mesh monitor" mac80211_set_vif_txpower
wireless_set_up
}
return 1
}
- mac80211_interface_cleanup "$phy"
- uci -q -P /var/state revert wireless._${phy}
+ mac80211_reset_config "$phy"
+
+ for wdev in $(list_phy_interfaces "$phy"); do
+ ip link set dev "$wdev" down
+ iw dev "$wdev" del
+ done
}
add_driver mac80211
projects / openwrt / staging / hauke.git / blobdiff