#!/bin/sh
. /lib/netifd/netifd-wireless.sh
. /lib/netifd/hostapd.sh
-. /lib/netifd/mac80211.sh
init_wireless_driver "$@"
hostapd_common_add_device_config
config_add_string path phy 'macaddr:macaddr'
- config_add_string hwmode
config_add_string tx_burst
+ config_add_string distance
config_add_int beacon_int chanbw frag rts
- config_add_int rxantenna txantenna antenna_gain txpower distance
+ config_add_int rxantenna txantenna antenna_gain txpower
config_add_boolean noscan ht_coex acs_exclude_dfs
config_add_array ht_capab
config_add_array channels
+ config_add_array scan_list
config_add_boolean \
rxldpc \
short_gi_80 \
su_beamformee \
mu_beamformer \
mu_beamformee \
+ he_su_beamformer \
+ he_su_beamformee \
+ he_mu_beamformer \
vht_txop_ps \
htc_vht \
rx_antenna_pattern \
- tx_antenna_pattern
- config_add_int vht_max_a_mpdu_len_exp vht_max_mpdu vht_link_adapt vht160 rx_stbc tx_stbc
+ tx_antenna_pattern \
+ he_spr_sr_control \
+ he_twt_required
+ config_add_int \
+ vht_max_a_mpdu_len_exp \
+ vht_max_mpdu \
+ vht_link_adapt \
+ vht160 \
+ rx_stbc \
+ tx_stbc \
+ he_bss_color \
+ he_spr_non_srg_obss_pd_max_offset
config_add_boolean \
ldpc \
greenfield \
export -n -- "$__var=$__out"
}
+mac80211_add_he_capabilities() {
+ local __out= oifs
+
+ oifs="$IFS"
+ IFS=:
+ for capab in "$@"; do
+ set -- $capab
+ [ "$(($4))" -gt 0 ] || continue
+ [ "$(((0x$2) & $3))" -gt 0 ] || {
+ eval "$1=0"
+ continue
+ }
+ append base_cfg "$1=1" "$N"
+ done
+ IFS="$oifs"
+}
+
mac80211_hostapd_setup_base() {
local phy="$1"
json_select config
[ "$auto_channel" -gt 0 ] && channel=acs_survey
- [ "$auto_channel" -gt 0 ] && json_get_values channel_list channels
[ "$auto_channel" -gt 0 ] && json_get_vars acs_exclude_dfs
[ -n "$acs_exclude_dfs" ] && [ "$acs_exclude_dfs" -gt 0 ] &&
json_get_vars noscan ht_coex
json_get_values ht_capab_list ht_capab tx_burst
+ json_get_values channel_list channels
+
+ [ "$auto_channel" = 0 ] && [ -z "$channel_list" ] && \
+ channel_list="$channel"
set_default noscan 0
[ "$noscan" -gt 0 ] && hostapd_noscan=1
[ "$tx_burst" = 0 ] && tx_burst=
+ chan_ofs=0
+ [ "$band" = "6g" ] && chan_ofs=1
+
ieee80211n=1
ht_capab=
case "$htmode" in
- VHT20|HT20) ;;
- HT40*|VHT40|VHT80|VHT160)
+ VHT20|HT20|HE20) ;;
+ HT40*|VHT40|VHT80|VHT160|HE40|HE80|HE160)
case "$hwmode" in
a)
- case "$(( ($channel / 4) % 2 ))" in
+ case "$(( (($channel / 4) + $chan_ofs) % 2 ))" in
1) ht_capab="[HT40+]";;
0) ht_capab="[HT40-]";;
esac
# 802.11ac
enable_ac=0
+ vht_oper_chwidth=0
+ vht_center_seg0=
+
idx="$channel"
case "$htmode" in
- VHT20) enable_ac=1;;
- VHT40)
- case "$(( ($channel / 4) % 2 ))" in
+ VHT20|HE20) enable_ac=1;;
+ VHT40|HE40)
+ case "$(( (($channel / 4) + $chan_ofs) % 2 ))" in
1) idx=$(($channel + 2));;
0) idx=$(($channel - 2));;
esac
enable_ac=1
- append base_cfg "vht_oper_chwidth=0" "$N"
- append base_cfg "vht_oper_centr_freq_seg0_idx=$idx" "$N"
+ vht_center_seg0=$idx
;;
- VHT80)
- case "$(( ($channel / 4) % 4 ))" in
+ VHT80|HE80)
+ case "$(( (($channel / 4) + $chan_ofs) % 4 ))" in
1) idx=$(($channel + 6));;
2) idx=$(($channel + 2));;
3) idx=$(($channel - 2));;
0) idx=$(($channel - 6));;
esac
enable_ac=1
- append base_cfg "vht_oper_chwidth=1" "$N"
- append base_cfg "vht_oper_centr_freq_seg0_idx=$idx" "$N"
+ vht_oper_chwidth=1
+ vht_center_seg0=$idx
;;
- VHT160)
- case "$channel" in
- 36|40|44|48|52|56|60|64) idx=50;;
- 100|104|108|112|116|120|124|128) idx=114;;
- esac
+ VHT160|HE160)
+ if [ "$band" = "6g" ]; then
+ case "$channel" in
+ 1|5|9|13|17|21|25|29) idx=15;;
+ 33|37|41|45|49|53|57|61) idx=47;;
+ 65|69|73|77|81|85|89|93) idx=79;;
+ 97|101|105|109|113|117|121|125) idx=111;;
+ 129|133|137|141|145|149|153|157) idx=143;;
+ 161|165|169|173|177|181|185|189) idx=175;;
+ 193|197|201|205|209|213|217|221) idx=207;;
+ esac
+ else
+ case "$channel" in
+ 36|40|44|48|52|56|60|64) idx=50;;
+ 100|104|108|112|116|120|124|128) idx=114;;
+ esac
+ fi
enable_ac=1
- append base_cfg "vht_oper_chwidth=2" "$N"
- append base_cfg "vht_oper_centr_freq_seg0_idx=$idx" "$N"
+ vht_oper_chwidth=2
+ vht_center_seg0=$idx
;;
esac
+ [ "$band" = "6g" ] && {
+ op_class=
+ case "$htmode" in
+ HE20) op_class=131;;
+ HE*) op_class=$((132 + $vht_oper_chwidth))
+ esac
+ [ -n "$op_class" ] && append base_cfg "op_class=$op_class" "$N"
+ }
+ [ "$hwmode" = "a" ] || enable_ac=0
if [ "$enable_ac" != "0" ]; then
json_get_vars \
vht_cap="$(($vht_cap | $cap))"
done
+ append base_cfg "vht_oper_chwidth=$vht_oper_chwidth" "$N"
+ append base_cfg "vht_oper_centr_freq_seg0_idx=$vht_center_seg0" "$N"
+
cap_rx_stbc=$((($vht_cap >> 8) & 7))
[ "$rx_stbc" -lt "$cap_rx_stbc" ] && cap_rx_stbc="$rx_stbc"
vht_cap="$(( ($vht_cap & ~(0x700)) | ($cap_rx_stbc << 8) ))"
[ -n "$vht_capab" ] && append base_cfg "vht_capab=$vht_capab" "$N"
fi
+ # 802.11ax
+ enable_ax=0
+ case "$htmode" in
+ HE*) enable_ax=1 ;;
+ esac
+
+ if [ "$enable_ax" != "0" ]; then
+ json_get_vars \
+ he_su_beamformer:1 \
+ he_su_beamformee:0 \
+ he_mu_beamformer:1 \
+ he_twt_required:0 \
+ he_spr_sr_control:0 \
+ he_spr_non_srg_obss_pd_max_offset:1 \
+ he_bss_color
+
+ he_phy_cap=$(iw phy "$phy" info | awk -F "[()]" '/HE PHY Capabilities/ { print $2 }' | head -1)
+ he_phy_cap=${he_phy_cap:2}
+ he_mac_cap=$(iw phy "$phy" info | awk -F "[()]" '/HE MAC Capabilities/ { print $2 }' | head -1)
+ he_mac_cap=${he_mac_cap:2}
+
+ append base_cfg "ieee80211ax=1" "$N"
+ [ -n "$he_bss_color" ] && append base_cfg "he_bss_color=$he_bss_color" "$N"
+ [ "$hwmode" = "a" ] && {
+ append base_cfg "he_oper_chwidth=$vht_oper_chwidth" "$N"
+ append base_cfg "he_oper_centr_freq_seg0_idx=$vht_center_seg0" "$N"
+ }
+
+ mac80211_add_he_capabilities \
+ he_su_beamformer:${he_phy_cap:6:2}:0x80:$he_su_beamformer \
+ he_su_beamformee:${he_phy_cap:8:2}:0x1:$he_su_beamformee \
+ he_mu_beamformer:${he_phy_cap:8:2}:0x2:$he_mu_beamformer \
+ he_spr_sr_control:${he_phy_cap:14:2}:0x1:$he_spr_sr_control \
+ he_twt_required:${he_mac_cap:0:2}:0x6:$he_twt_required
+
+ [ "$he_spr_sr_control" -gt 0 ] && append base_cfg "he_spr_non_srg_obss_pd_max_offset=$he_spr_non_srg_obss_pd_max_offset" "$N"
+
+ append base_cfg "he_default_pe_duration=4" "$N"
+ append base_cfg "he_rts_threshold=1023" "$N"
+ append base_cfg "he_mu_edca_qos_info_param_count=0" "$N"
+ append base_cfg "he_mu_edca_qos_info_q_ack=0" "$N"
+ append base_cfg "he_mu_edca_qos_info_queue_request=0" "$N"
+ append base_cfg "he_mu_edca_qos_info_txop_request=0" "$N"
+ append base_cfg "he_mu_edca_ac_be_aifsn=8" "$N"
+ append base_cfg "he_mu_edca_ac_be_aci=0" "$N"
+ append base_cfg "he_mu_edca_ac_be_ecwmin=9" "$N"
+ append base_cfg "he_mu_edca_ac_be_ecwmax=10" "$N"
+ append base_cfg "he_mu_edca_ac_be_timer=255" "$N"
+ append base_cfg "he_mu_edca_ac_bk_aifsn=15" "$N"
+ append base_cfg "he_mu_edca_ac_bk_aci=1" "$N"
+ append base_cfg "he_mu_edca_ac_bk_ecwmin=9" "$N"
+ append base_cfg "he_mu_edca_ac_bk_ecwmax=10" "$N"
+ append base_cfg "he_mu_edca_ac_bk_timer=255" "$N"
+ append base_cfg "he_mu_edca_ac_vi_ecwmin=5" "$N"
+ append base_cfg "he_mu_edca_ac_vi_ecwmax=7" "$N"
+ append base_cfg "he_mu_edca_ac_vi_aifsn=5" "$N"
+ append base_cfg "he_mu_edca_ac_vi_aci=2" "$N"
+ append base_cfg "he_mu_edca_ac_vi_timer=255" "$N"
+ append base_cfg "he_mu_edca_ac_vo_aifsn=5" "$N"
+ append base_cfg "he_mu_edca_ac_vo_aci=3" "$N"
+ append base_cfg "he_mu_edca_ac_vo_ecwmin=5" "$N"
+ append base_cfg "he_mu_edca_ac_vo_ecwmax=7" "$N"
+ append base_cfg "he_mu_edca_ac_vo_timer=255" "$N"
+ fi
+
hostapd_prepare_device_config "$hostapd_conf_file" nl80211
cat >> "$hostapd_conf_file" <<EOF
${channel:+channel=$channel}
hostapd_cfg=
append hostapd_cfg "$type=$ifname" "$N"
- hostapd_set_bss_options hostapd_cfg "$vif" || return 1
+ hostapd_set_bss_options hostapd_cfg "$phy" "$vif" || return 1
json_get_vars wds wds_bridge dtim_period max_listen_int start_disabled
set_default wds 0
local phy="$1"
local idx="$(($2 + 1))"
- head -n $(($macidx + 1)) /sys/class/ieee80211/${phy}/addresses | tail -n1
+ head -n $idx /sys/class/ieee80211/${phy}/addresses | tail -n1
}
mac80211_generate_mac() {
[ "$mask" = "00:00:00:00:00:00" ] && {
mask="ff:ff:ff:ff:ff:ff";
- [ "$(wc -l < /sys/class/ieee80211/${phy}/addresses)" -gt 1 ] && {
+ [ "$(wc -l < /sys/class/ieee80211/${phy}/addresses)" -gt $id ] && {
addr="$(mac80211_get_addr "$phy" "$id")"
[ -n "$addr" ] && {
echo "$addr"
[ "$((0x$mask1))" -gt 0 ] && {
b1="0x$1"
[ "$id" -gt 0 ] && \
- b1=$(($b1 ^ ((($id - !($b1 & 2)) << 2) | 0x2)))
+ b1=$(($b1 ^ ((($id - !($b1 & 2)) << 2)) | 0x2))
printf "%02x:%s:%s:%s:%s:%s" $b1 $2 $3 $4 $5 $6
return
}
find_phy() {
[ -n "$phy" -a -d /sys/class/ieee80211/$phy ] && return 0
[ -n "$path" ] && {
- phy="$(mac80211_path_to_phy "$path")"
+ phy="$(iwinfo nl80211 phyname "path=$path")"
[ -n "$phy" ] && return 0
}
[ -n "$macaddr" ] && {
local type="$3"
local wdsflag="$4"
local rc
+ local oldifname
- iw phy "$phy" interface add "$ifname" type "$type" $wdsflag
+ iw phy "$phy" interface add "$ifname" type "$type" $wdsflag >/dev/null 2>&1
rc="$?"
[ "$rc" = 233 ] && {
# Device might have just been deleted, give the kernel some time to finish cleaning it up
sleep 1
- iw phy "$phy" interface add "$ifname" type "$type" $wdsflag
+ iw phy "$phy" interface add "$ifname" type "$type" $wdsflag >/dev/null 2>&1
rc="$?"
}
}
[ "$rc" = 233 ] && {
- iw dev "$ifname" del
- sleep 1
+ iw dev "$ifname" del >/dev/null 2>&1
+ [ "$?" = 0 ] && {
+ sleep 1
- iw phy "$phy" interface add "$ifname" type "$type" $wdsflag
- rc="$?"
+ iw phy "$phy" interface add "$ifname" type "$type" $wdsflag >/dev/null 2>&1
+ rc="$?"
+ }
}
- [ "$rc" = 233 ] && {
+ [ "$rc" != 0 ] && {
# Device might not support virtual interfaces, so the interface never got deleted in the first place.
# Check if the interface already exists, and avoid failing in this case.
- ip link show dev "$ifname" >/dev/null 2>/dev/null && rc=0
+ [ -d "/sys/class/ieee80211/${phy}/device/net/${ifname}" ] && rc=0
+ }
+
+ [ "$rc" != 0 ] && {
+ # Device doesn't support virtual interfaces and may have existing interface other than ifname.
+ oldifname="$(basename "/sys/class/ieee80211/${phy}/device/net"/* 2>/dev/null)"
+ [ "$oldifname" ] && ip link set "$oldifname" name "$ifname" 1>/dev/null 2>&1
+ rc="$?"
}
[ "$rc" != 0 ] && wireless_setup_failed INTERFACE_CREATION_FAILED
mac80211_prepare_vif() {
json_select config
- json_get_vars ifname mode ssid wds powersave macaddr enable
+ json_get_vars ifname mode ssid wds powersave macaddr enable wpa_psk_file vlan_file
[ -n "$ifname" ] || ifname="wlan${phy#phy}${if_idx:+-$if_idx}"
if_idx=$((${if_idx:-0} + 1))
json_add_object data
json_add_string ifname "$ifname"
json_close_object
+
+ [ "$mode" == "ap" ] && {
+ [ -z "$wpa_psk_file" ] && hostapd_set_psk "$ifname"
+ [ -z "$vlan_file" ] && hostapd_set_vlan "$ifname"
+ }
+
json_select config
# It is far easier to delete and create the desired interface
local add_sp=0
local spobj="$(ubus -S list | grep wpa_supplicant.${ifname})"
- wpa_supplicant_prepare_interface "$ifname" nl80211 || return 1
+ [ "$enable" = 0 ] && {
+ ubus call wpa_supplicant.${phy} config_remove "{\"iface\":\"$ifname\"}"
+ ip link set dev "$ifname" down
+ iw dev "$ifname" del
+ return 0
+ }
+
wpa_supplicant_prepare_interface "$ifname" nl80211 || {
iw dev "$ifname" del
return 1
[ "$spobj" ] && ubus call wpa_supplicant config_remove "{\"iface\":\"$ifname\"}"
add_sp=1
fi
- [ "$enable" = 0 ] && {
- ubus call wpa_supplicant config_remove "{\"iface\":\"$ifname\"}"
- ip link set dev "$ifname" down
- return 0
- }
[ -z "$spobj" ] && add_sp=1
+ NEW_MD5_SP=$(test -e "${_config}" && md5sum ${_config})
+ OLD_MD5_SP=$(uci -q -P /var/state get wireless._${phy}.md5_${ifname})
if [ "$add_sp" = "1" ]; then
wpa_supplicant_run "$ifname" "$hostapd_ctrl"
else
- ubus call $spobj reload
+ [ "${NEW_MD5_SP}" == "${OLD_MD5_SP}" ] || ubus call $spobj reload
fi
+ uci -q -P /var/state set wireless._${phy}.md5_${ifname}="${NEW_MD5_SP}"
+ return 0
}
mac80211_setup_supplicant_noctl() {
case "$htmode" in
VHT20|HT20) iw_htmode=HT20;;
HT40*|VHT40|VHT160)
- case "$hwmode" in
- a)
- case "$(( ($channel / 4) % 2 ))" in
- 1) iw_htmode="HT40+" ;;
- 0) iw_htmode="HT40-";;
- esac
- ;;
- *)
+ case "$band" in
+ 2g)
case "$htmode" in
HT40+) iw_htmode="HT40+";;
HT40-) iw_htmode="HT40-";;
;;
esac
;;
+ *)
+ case "$(( ($channel / 4) % 2 ))" in
+ 1) iw_htmode="HT40+" ;;
+ 0) iw_htmode="HT40-";;
+ esac
+ ;;
esac
[ "$auto_channel" -gt 0 ] && iw_htmode="HT40+"
;;
[ "$vif_enable" = 1 ] || action=down
if [ "$mode" != "ap" ] || [ "$ifname" = "$ap_ifname" ]; then
- logger ip link set dev "$ifname" $action
ip link set dev "$ifname" "$action" || {
wireless_setup_vif_failed IFUP_ERROR
json_select ..
case "$mode" in
mesh)
wireless_vif_parse_encryption
- freq="$(get_freq "$phy" "$channel")"
+ [ -z "$htmode" ] && htmode="NOHT";
if [ "$wpa" -gt 0 -o "$auto_channel" -gt 0 ] || chan_is_dfs "$phy" "$channel"; then
mac80211_setup_supplicant $vif_enable || failed=1
else
adhoc)
wireless_vif_parse_encryption
if [ "$wpa" -gt 0 -o "$auto_channel" -gt 0 ]; then
- freq="$(get_freq "$phy" "$channel")"
mac80211_setup_supplicant_noctl $vif_enable || failed=1
else
mac80211_setup_adhoc $vif_enable
get_freq() {
local phy="$1"
- local chan="$2"
- iw "$phy" info | grep -E -m1 "(\* ${chan:-....} MHz${chan:+|\\[$chan\\]})" | grep MHz | awk '{print $2}'
+ local channel="$2"
+ local band="$3"
+
+ case "$band" in
+ 2g) band="1:";;
+ 5g) band="2:";;
+ 60g) band="3:";;
+ 6g) band="4:";;
+ esac
+
+ iw "$phy" info | awk -v band="$band" -v channel="[$channel]" '
+
+$1 ~ /Band/ {
+ band_match = band == $2
}
+band_match && $3 == "MHz" && $4 == channel {
+ print $2
+ exit
+}
+'
+}
+
+
chan_is_dfs() {
local phy="$1"
local chan="$2"
rxantenna txantenna \
frag rts beacon_int:100 htmode
json_get_values basic_rate_list basic_rate
+ json_get_values scan_list scan_list
json_select ..
find_phy || {
return 1
}
- [ -z "$(uci -q -P /var/state show wireless._${phy})" ] && {
- uci -q -P /var/state set wireless._${phy}=phy
- wireless_set_data phy="$phy"
- }
+ wireless_set_data phy="$phy"
+ [ -z "$(uci -q -P /var/state show wireless._${phy})" ] && uci -q -P /var/state set wireless._${phy}=phy
OLDAPLIST=$(uci -q -P /var/state get wireless._${phy}.aplist)
OLDSPLIST=$(uci -q -P /var/state get wireless._${phy}.splist)
done
# convert channel to frequency
- [ "$auto_channel" -gt 0 ] || freq="$(get_freq "$phy" "$channel")"
+ [ "$auto_channel" -gt 0 ] || freq="$(get_freq "$phy" "$channel" "$band")"
[ -n "$country" ] && {
iw reg get | grep -q "^country $country:" || {
[ "$rxantenna" = "all" ] && rxantenna=0xffffffff
iw phy "$phy" set antenna $txantenna $rxantenna >/dev/null 2>&1
- iw phy "$phy" set antenna_gain $antenna_gain
- iw phy "$phy" set distance "$distance"
+ iw phy "$phy" set antenna_gain $antenna_gain >/dev/null 2>&1
+ iw phy "$phy" set distance "$distance" >/dev/null 2>&1
if [ -n "$txpower" ]; then
iw phy "$phy" set txpower fixed "${txpower%%.*}00"
OLD_MD5=$(uci -q -P /var/state get wireless._${phy}.md5)
if [ "${NEWAPLIST}" != "${OLDAPLIST}" ]; then
mac80211_vap_cleanup hostapd "${OLDAPLIST}"
- [ -n "${NEWAPLIST}" ] && mac80211_iw_interface_add "$phy" "${NEWAPLIST%% *}" __ap || return
fi
+ [ -n "${NEWAPLIST}" ] && mac80211_iw_interface_add "$phy" "${NEWAPLIST%% *}" __ap
local add_ap=0
local primary_ap=${NEWAPLIST%% *}
[ -n "$hostapd_ctrl" ] && {
local no_reload=1
if [ -n "$(ubus list | grep hostapd.$primary_ap)" ]; then
+ no_reload=0
[ "${NEW_MD5}" = "${OLD_MD5}" ] || {
ubus call hostapd.$primary_ap reload
no_reload=$?
if [ "$no_reload" != "0" ]; then
mac80211_vap_cleanup hostapd "${OLDAPLIST}"
- [ -n "${NEWAPLIST}" ] && mac80211_iw_interface_add "$phy" "${NEWAPLIST%% *}" __ap || return
+ mac80211_vap_cleanup wpa_supplicant "$(uci -q -P /var/state get wireless._${phy}.splist)"
+ mac80211_vap_cleanup none "$(uci -q -P /var/state get wireless._${phy}.umlist)"
+ sleep 2
+ mac80211_iw_interface_add "$phy" "${NEWAPLIST%% *}" __ap
+ for_each_interface "sta adhoc mesh monitor" mac80211_prepare_vif
fi
}
fi
if [ "$no_reload" != "0" ]; then
add_ap=1
ubus wait_for hostapd
- ubus call hostapd config_add "{\"iface\":\"$primary_ap\", \"config\":\"${hostapd_conf_file}\"}"
- local hostapd_pid=$(ubus call service list '{"name": "hostapd"}' | jsonfilter -l 1 -e "@['hostapd'].instances['hostapd'].pid")
- wireless_add_process "$hostapd_pid" "/usr/sbin/hostapd" 1
+ local hostapd_res="$(ubus call hostapd config_add "{\"iface\":\"$primary_ap\", \"config\":\"${hostapd_conf_file}\"}")"
+ ret="$?"
+ [ "$ret" != 0 -o -z "$hostapd_res" ] && {
+ wireless_setup_failed HOSTAPD_START_FAILED
+ return
+ }
+ wireless_add_process "$(jsonfilter -s "$hostapd_res" -l 1 -e @.pid)" "/usr/sbin/hostapd" 1 1
fi
- ret="$?"
- [ "$ret" != 0 ] && {
- wireless_setup_failed HOSTAPD_START_FAILED
- return
- }
}
uci -q -P /var/state set wireless._${phy}.aplist="${NEWAPLIST}"
uci -q -P /var/state set wireless._${phy}.md5="${NEW_MD5}"
}
drv_mac80211_teardown() {
- wireless_process_kill_all
-
json_select data
json_get_vars phy
json_select ..
+ [ -n "$phy" ] || {
+ echo "Bug: PHY is undefined for device '$1'"
+ return 1
+ }
mac80211_interface_cleanup "$phy"
uci -q -P /var/state revert wireless._${phy}
projects / openwrt / openwrt.git / blobdiff