--- /dev/null
+From: Hante Meuleman <meuleman@broadcom.com>
+Date: Wed, 17 Feb 2016 11:27:07 +0100
+Subject: [PATCH] brcmfmac: switch to new platform data
+
+Platform data is only available for sdio. With this patch a new
+platform data structure is being used which allows for platform
+data for any device and configurable per device. This patch only
+switches to the new structure and adds support for SDIO devices.
+
+Reviewed-by: Arend Van Spriel <arend@broadcom.com>
+Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
+Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
+Signed-off-by: Arend van Spriel <arend@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+@@ -103,7 +103,7 @@ static void brcmf_sdiod_dummy_irqhandler
+
+ int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
+ {
+- struct brcmfmac_sdio_platform_data *pdata;
++ struct brcmfmac_sdio_pd *pdata;
+ int ret = 0;
+ u8 data;
+ u32 addr, gpiocontrol;
+@@ -173,7 +173,7 @@ int brcmf_sdiod_intr_register(struct brc
+
+ int brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev)
+ {
+- struct brcmfmac_sdio_platform_data *pdata;
++ struct brcmfmac_sdio_pd *pdata;
+
+ brcmf_dbg(SDIO, "Entering\n");
+
+@@ -1164,17 +1164,6 @@ static int brcmf_ops_sdio_probe(struct s
+ dev_set_drvdata(&func->dev, bus_if);
+ dev_set_drvdata(&sdiodev->func[1]->dev, bus_if);
+ sdiodev->dev = &sdiodev->func[1]->dev;
+- sdiodev->pdata = brcmf_get_module_param(sdiodev->dev);
+-
+-#ifdef CONFIG_PM_SLEEP
+- /* wowl can be supported when KEEP_POWER is true and (WAKE_SDIO_IRQ
+- * is true or when platform data OOB irq is true).
+- */
+- if ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_KEEP_POWER) &&
+- ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_WAKE_SDIO_IRQ) ||
+- (sdiodev->pdata && sdiodev->pdata->oob_irq_supported)))
+- bus_if->wowl_supported = true;
+-#endif
+
+ brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_DOWN);
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -6459,8 +6459,8 @@ int brcmf_cfg80211_wait_vif_event(struct
+ static s32 brcmf_translate_country_code(struct brcmf_pub *drvr, char alpha2[2],
+ struct brcmf_fil_country_le *ccreq)
+ {
+- struct cc_translate *country_codes;
+- struct cc_entry *cc;
++ struct brcmfmac_pd_cc *country_codes;
++ struct brcmfmac_pd_cc_entry *cc;
+ s32 found_index;
+ int i;
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+@@ -80,7 +80,7 @@ module_param_named(ignore_probe_fail, br
+ MODULE_PARM_DESC(ignore_probe_fail, "always succeed probe for debugging");
+ #endif
+
+-static struct brcmfmac_sdio_platform_data *brcmfmac_pdata;
++static struct brcmfmac_platform_data *brcmfmac_pdata;
+ struct brcmf_mp_global_t brcmf_mp_global;
+
+ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
+@@ -229,15 +229,46 @@ void __brcmf_dbg(u32 level, const char *
+
+ static void brcmf_mp_attach(void)
+ {
++ /* If module param firmware path is set then this will always be used,
++ * if not set then if available use the platform data version. To make
++ * sure it gets initialized at all, always copy the module param version
++ */
+ strlcpy(brcmf_mp_global.firmware_path, brcmf_firmware_path,
+ BRCMF_FW_ALTPATH_LEN);
++ if ((brcmfmac_pdata) && (brcmfmac_pdata->fw_alternative_path) &&
++ (brcmf_mp_global.firmware_path[0] == '\0')) {
++ strlcpy(brcmf_mp_global.firmware_path,
++ brcmfmac_pdata->fw_alternative_path,
++ BRCMF_FW_ALTPATH_LEN);
++ }
+ }
+
+-struct brcmfmac_sdio_platform_data *brcmf_get_module_param(struct device *dev)
+-{
+- if (!brcmfmac_pdata)
+- brcmf_of_probe(dev, &brcmfmac_pdata);
+- return brcmfmac_pdata;
++struct brcmfmac_sdio_pd *brcmf_get_module_param(struct device *dev,
++ enum brcmf_bus_type bus_type,
++ u32 chip, u32 chiprev)
++{
++ struct brcmfmac_sdio_pd *pdata;
++ struct brcmfmac_pd_device *device_pd;
++ int i;
++
++ if (brcmfmac_pdata) {
++ for (i = 0; i < brcmfmac_pdata->device_count; i++) {
++ device_pd = &brcmfmac_pdata->devices[i];
++ if ((device_pd->bus_type == bus_type) &&
++ (device_pd->id == chip) &&
++ ((device_pd->rev == chiprev) ||
++ (device_pd->rev == -1))) {
++ brcmf_dbg(INFO, "Platform data for device found\n");
++ if (device_pd->bus_type == BRCMF_BUSTYPE_SDIO)
++ return &device_pd->bus.sdio;
++ break;
++ }
++ }
++ }
++ pdata = NULL;
++ brcmf_of_probe(dev, &pdata);
++
++ return pdata;
+ }
+
+ int brcmf_mp_device_attach(struct brcmf_pub *drvr)
+@@ -287,7 +318,7 @@ static int brcmf_common_pd_remove(struct
+ static struct platform_driver brcmf_pd = {
+ .remove = brcmf_common_pd_remove,
+ .driver = {
+- .name = BRCMFMAC_SDIO_PDATA_NAME,
++ .name = BRCMFMAC_PDATA_NAME,
+ }
+ };
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
+@@ -16,7 +16,7 @@
+ #define BRCMFMAC_COMMON_H
+
+ #include <linux/platform_device.h>
+-#include <linux/platform_data/brcmfmac-sdio.h>
++#include <linux/platform_data/brcmfmac.h>
+ #include "fwil_types.h"
+
+ extern const u8 ALLFFMAC[ETH_ALEN];
+@@ -43,33 +43,6 @@ struct brcmf_mp_global_t {
+ extern struct brcmf_mp_global_t brcmf_mp_global;
+
+ /**
+- * struct cc_entry - Struct for translating user space country code (iso3166) to
+- * firmware country code and revision.
+- *
+- * @iso3166: iso3166 alpha 2 country code string.
+- * @cc: firmware country code string.
+- * @rev: firmware country code revision.
+- */
+-struct cc_entry {
+- char iso3166[BRCMF_COUNTRY_BUF_SZ];
+- char cc[BRCMF_COUNTRY_BUF_SZ];
+- s32 rev;
+-};
+-
+-/**
+- * struct cc_translate - Struct for translating country codes as set by user
+- * space to a country code and rev which can be used by
+- * firmware.
+- *
+- * @table_size: number of entries in table (> 0)
+- * @table: dynamic array of 1 or more elements with translation information.
+- */
+-struct cc_translate {
+- int table_size;
+- struct cc_entry table[0];
+-};
+-
+-/**
+ * struct brcmf_mp_device - Device module paramaters.
+ *
+ * @sdiod_txglomsz: SDIO txglom size.
+@@ -88,10 +61,12 @@ struct brcmf_mp_device {
+ int fcmode;
+ bool roamoff;
+ bool ignore_probe_fail;
+- struct cc_translate *country_codes;
++ struct brcmfmac_pd_cc *country_codes;
+ };
+
+-struct brcmfmac_sdio_platform_data *brcmf_get_module_param(struct device *dev);
++struct brcmfmac_sdio_pd *brcmf_get_module_param(struct device *dev,
++ enum brcmf_bus_type bus_type,
++ u32 chip, u32 chiprev);
+ int brcmf_mp_device_attach(struct brcmf_pub *drvr);
+ void brcmf_mp_device_detach(struct brcmf_pub *drvr);
+ #ifdef DEBUG
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
+@@ -23,8 +23,7 @@
+ #include "common.h"
+ #include "of.h"
+
+-void
+-brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_platform_data **sdio)
++void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio)
+ {
+ struct device_node *np = dev->of_node;
+ int irq;
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h
+@@ -15,10 +15,9 @@
+ */
+ #ifdef CONFIG_OF
+ void
+-brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_platform_data **sdio);
++brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio);
+ #else
+-static void brcmf_of_probe(struct device *dev,
+- struct brcmfmac_sdio_platform_data **sdio)
++static void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio)
+ {
+ }
+ #endif /* CONFIG_OF */
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+@@ -33,8 +33,6 @@
+ #include <linux/bcma/bcma.h>
+ #include <linux/debugfs.h>
+ #include <linux/vmalloc.h>
+-#include <linux/platform_data/brcmfmac-sdio.h>
+-#include <linux/moduleparam.h>
+ #include <asm/unaligned.h>
+ #include <defs.h>
+ #include <brcmu_wifi.h>
+@@ -44,6 +42,8 @@
+ #include "sdio.h"
+ #include "chip.h"
+ #include "firmware.h"
++#include "core.h"
++#include "common.h"
+
+ #define DCMD_RESP_TIMEOUT msecs_to_jiffies(2500)
+ #define CTL_DONE_TIMEOUT msecs_to_jiffies(2500)
+@@ -3775,26 +3775,28 @@ static const struct brcmf_buscore_ops br
+ static bool
+ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
+ {
++ struct brcmf_sdio_dev *sdiodev;
+ u8 clkctl = 0;
+ int err = 0;
+ int reg_addr;
+ u32 reg_val;
+ u32 drivestrength;
+
+- sdio_claim_host(bus->sdiodev->func[1]);
++ sdiodev = bus->sdiodev;
++ sdio_claim_host(sdiodev->func[1]);
+
+ pr_debug("F1 signature read @0x18000000=0x%4x\n",
+- brcmf_sdiod_regrl(bus->sdiodev, SI_ENUM_BASE, NULL));
++ brcmf_sdiod_regrl(sdiodev, SI_ENUM_BASE, NULL));
+
+ /*
+ * Force PLL off until brcmf_chip_attach()
+ * programs PLL control regs
+ */
+
+- brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
++ brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+ BRCMF_INIT_CLKCTL1, &err);
+ if (!err)
+- clkctl = brcmf_sdiod_regrb(bus->sdiodev,
++ clkctl = brcmf_sdiod_regrb(sdiodev,
+ SBSDIO_FUNC1_CHIPCLKCSR, &err);
+
+ if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) {
+@@ -3803,50 +3805,77 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
+ goto fail;
+ }
+
+- bus->ci = brcmf_chip_attach(bus->sdiodev, &brcmf_sdio_buscore_ops);
++ bus->ci = brcmf_chip_attach(sdiodev, &brcmf_sdio_buscore_ops);
+ if (IS_ERR(bus->ci)) {
+ brcmf_err("brcmf_chip_attach failed!\n");
+ bus->ci = NULL;
+ goto fail;
+ }
++ sdiodev->pdata = brcmf_get_module_param(sdiodev->dev,
++ BRCMF_BUSTYPE_SDIO,
++ bus->ci->chip,
++ bus->ci->chiprev);
++ /* platform specific configuration:
++ * alignments must be at least 4 bytes for ADMA
++ */
++ bus->head_align = ALIGNMENT;
++ bus->sgentry_align = ALIGNMENT;
++ if (sdiodev->pdata) {
++ if (sdiodev->pdata->sd_head_align > ALIGNMENT)
++ bus->head_align = sdiodev->pdata->sd_head_align;
++ if (sdiodev->pdata->sd_sgentry_align > ALIGNMENT)
++ bus->sgentry_align = sdiodev->pdata->sd_sgentry_align;
++ }
++ /* allocate scatter-gather table. sg support
++ * will be disabled upon allocation failure.
++ */
++ brcmf_sdiod_sgtable_alloc(sdiodev);
++
++#ifdef CONFIG_PM_SLEEP
++ /* wowl can be supported when KEEP_POWER is true and (WAKE_SDIO_IRQ
++ * is true or when platform data OOB irq is true).
++ */
++ if ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_KEEP_POWER) &&
++ ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_WAKE_SDIO_IRQ) ||
++ (sdiodev->pdata && sdiodev->pdata->oob_irq_supported)))
++ sdiodev->bus_if->wowl_supported = true;
++#endif
+
+ if (brcmf_sdio_kso_init(bus)) {
+ brcmf_err("error enabling KSO\n");
+ goto fail;
+ }
+
+- if ((bus->sdiodev->pdata) && (bus->sdiodev->pdata->drive_strength))
+- drivestrength = bus->sdiodev->pdata->drive_strength;
++ if ((sdiodev->pdata) && (sdiodev->pdata->drive_strength))
++ drivestrength = sdiodev->pdata->drive_strength;
+ else
+ drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH;
+- brcmf_sdio_drivestrengthinit(bus->sdiodev, bus->ci, drivestrength);
++ brcmf_sdio_drivestrengthinit(sdiodev, bus->ci, drivestrength);
+
+ /* Set card control so an SDIO card reset does a WLAN backplane reset */
+- reg_val = brcmf_sdiod_regrb(bus->sdiodev,
+- SDIO_CCCR_BRCM_CARDCTRL, &err);
++ reg_val = brcmf_sdiod_regrb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, &err);
+ if (err)
+ goto fail;
+
+ reg_val |= SDIO_CCCR_BRCM_CARDCTRL_WLANRESET;
+
+- brcmf_sdiod_regwb(bus->sdiodev,
+- SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err);
++ brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err);
+ if (err)
+ goto fail;
+
+ /* set PMUControl so a backplane reset does PMU state reload */
+ reg_addr = CORE_CC_REG(brcmf_chip_get_pmu(bus->ci)->base, pmucontrol);
+- reg_val = brcmf_sdiod_regrl(bus->sdiodev, reg_addr, &err);
++ reg_val = brcmf_sdiod_regrl(sdiodev, reg_addr, &err);
+ if (err)
+ goto fail;
+
+ reg_val |= (BCMA_CC_PMU_CTL_RES_RELOAD << BCMA_CC_PMU_CTL_RES_SHIFT);
+
+- brcmf_sdiod_regwl(bus->sdiodev, reg_addr, reg_val, &err);
++ brcmf_sdiod_regwl(sdiodev, reg_addr, reg_val, &err);
+ if (err)
+ goto fail;
+
+- sdio_release_host(bus->sdiodev->func[1]);
++ sdio_release_host(sdiodev->func[1]);
+
+ brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN);
+
+@@ -3867,7 +3896,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
+ return true;
+
+ fail:
+- sdio_release_host(bus->sdiodev->func[1]);
++ sdio_release_host(sdiodev->func[1]);
+ return false;
+ }
+
+@@ -4045,18 +4074,6 @@ struct brcmf_sdio *brcmf_sdio_probe(stru
+ bus->txminmax = BRCMF_TXMINMAX;
+ bus->tx_seq = SDPCM_SEQ_WRAP - 1;
+
+- /* platform specific configuration:
+- * alignments must be at least 4 bytes for ADMA
+- */
+- bus->head_align = ALIGNMENT;
+- bus->sgentry_align = ALIGNMENT;
+- if (sdiodev->pdata) {
+- if (sdiodev->pdata->sd_head_align > ALIGNMENT)
+- bus->head_align = sdiodev->pdata->sd_head_align;
+- if (sdiodev->pdata->sd_sgentry_align > ALIGNMENT)
+- bus->sgentry_align = sdiodev->pdata->sd_sgentry_align;
+- }
+-
+ /* single-threaded workqueue */
+ wq = alloc_ordered_workqueue("brcmf_wq/%s", WQ_MEM_RECLAIM,
+ dev_name(&sdiodev->func[1]->dev));
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+@@ -184,7 +184,7 @@ struct brcmf_sdio_dev {
+ struct brcmf_sdio *bus;
+ struct device *dev;
+ struct brcmf_bus *bus_if;
+- struct brcmfmac_sdio_platform_data *pdata;
++ struct brcmfmac_sdio_pd *pdata;
+ bool oob_irq_requested;
+ bool irq_en; /* irq enable flags */
+ spinlock_t irq_en_lock;
+--- a/include/linux/platform_data/brcmfmac-sdio.h
++++ /dev/null
+@@ -1,135 +0,0 @@
+-/*
+- * Copyright (c) 2013 Broadcom Corporation
+- *
+- * Permission to use, copy, modify, and/or distribute this software for any
+- * purpose with or without fee is hereby granted, provided that the above
+- * copyright notice and this permission notice appear in all copies.
+- *
+- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+- */
+-
+-#ifndef _LINUX_BRCMFMAC_PLATFORM_H
+-#define _LINUX_BRCMFMAC_PLATFORM_H
+-
+-/*
+- * Platform specific driver functions and data. Through the platform specific
+- * device data functions can be provided to help the brcmfmac driver to
+- * operate with the device in combination with the used platform.
+- *
+- * Use the platform data in the following (similar) way:
+- *
+- *
+-#include <brcmfmac_platform.h>
+-
+-
+-static void brcmfmac_power_on(void)
+-{
+-}
+-
+-static void brcmfmac_power_off(void)
+-{
+-}
+-
+-static void brcmfmac_reset(void)
+-{
+-}
+-
+-static struct brcmfmac_sdio_platform_data brcmfmac_sdio_pdata = {
+- .power_on = brcmfmac_power_on,
+- .power_off = brcmfmac_power_off,
+- .reset = brcmfmac_reset
+-};
+-
+-static struct platform_device brcmfmac_device = {
+- .name = BRCMFMAC_SDIO_PDATA_NAME,
+- .id = PLATFORM_DEVID_NONE,
+- .dev.platform_data = &brcmfmac_sdio_pdata
+-};
+-
+-void __init brcmfmac_init_pdata(void)
+-{
+- brcmfmac_sdio_pdata.oob_irq_supported = true;
+- brcmfmac_sdio_pdata.oob_irq_nr = gpio_to_irq(GPIO_BRCMF_SDIO_OOB);
+- brcmfmac_sdio_pdata.oob_irq_flags = IORESOURCE_IRQ |
+- IORESOURCE_IRQ_HIGHLEVEL;
+- platform_device_register(&brcmfmac_device);
+-}
+- *
+- *
+- * Note: the brcmfmac can be loaded as module or be statically built-in into
+- * the kernel. If built-in then do note that it uses module_init (and
+- * module_exit) routines which equal device_initcall. So if you intend to
+- * create a module with the platform specific data for the brcmfmac and have
+- * it built-in to the kernel then use a higher initcall then device_initcall
+- * (see init.h). If this is not done then brcmfmac will load without problems
+- * but will not pickup the platform data.
+- *
+- * When the driver does not "detect" platform driver data then it will continue
+- * without reporting anything and just assume there is no data needed. Which is
+- * probably true for most platforms.
+- *
+- * Explanation of the platform_data fields:
+- *
+- * drive_strength: is the preferred drive_strength to be used for the SDIO
+- * pins. If 0 then a default value will be used. This is the target drive
+- * strength, the exact drive strength which will be used depends on the
+- * capabilities of the device.
+- *
+- * oob_irq_supported: does the board have support for OOB interrupts. SDIO
+- * in-band interrupts are relatively slow and for having less overhead on
+- * interrupt processing an out of band interrupt can be used. If the HW
+- * supports this then enable this by setting this field to true and configure
+- * the oob related fields.
+- *
+- * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are
+- * used for registering the irq using request_irq function.
+- *
+- * broken_sg_support: flag for broken sg list support of SDIO host controller.
+- * Set this to true if the SDIO host controller has higher align requirement
+- * than 32 bytes for each scatterlist item.
+- *
+- * sd_head_align: alignment requirement for start of data buffer
+- *
+- * sd_sgentry_align: length alignment requirement for each sg entry
+- *
+- * power_on: This function is called by the brcmfmac when the module gets
+- * loaded. This can be particularly useful for low power devices. The platform
+- * spcific routine may for example decide to power up the complete device.
+- * If there is no use-case for this function then provide NULL.
+- *
+- * power_off: This function is called by the brcmfmac when the module gets
+- * unloaded. At this point the device can be powered down or otherwise be reset.
+- * So if an actual power_off is not supported but reset is then reset the device
+- * when this function gets called. This can be particularly useful for low power
+- * devices. If there is no use-case for this function (either power-down or
+- * reset) then provide NULL.
+- *
+- * reset: This function can get called if the device communication broke down.
+- * This functionality is particularly useful in case of SDIO type devices. It is
+- * possible to reset a dongle via sdio data interface, but it requires that
+- * this is fully functional. This function is chip/module specific and this
+- * function should return only after the complete reset has completed.
+- */
+-
+-#define BRCMFMAC_SDIO_PDATA_NAME "brcmfmac_sdio"
+-
+-struct brcmfmac_sdio_platform_data {
+- unsigned int drive_strength;
+- bool oob_irq_supported;
+- unsigned int oob_irq_nr;
+- unsigned long oob_irq_flags;
+- bool broken_sg_support;
+- unsigned short sd_head_align;
+- unsigned short sd_sgentry_align;
+- void (*power_on)(void);
+- void (*power_off)(void);
+- void (*reset)(void);
+-};
+-
+-#endif /* _LINUX_BRCMFMAC_PLATFORM_H */
+--- /dev/null
++++ b/include/linux/platform_data/brcmfmac.h
+@@ -0,0 +1,185 @@
++/*
++ * Copyright (c) 201 Broadcom Corporation
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
++ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
++ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
++ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++
++#ifndef _LINUX_BRCMFMAC_PLATFORM_H
++#define _LINUX_BRCMFMAC_PLATFORM_H
++
++
++#define BRCMFMAC_PDATA_NAME "brcmfmac"
++
++#define BRCMFMAC_COUNTRY_BUF_SZ 4
++
++
++/*
++ * Platform specific driver functions and data. Through the platform specific
++ * device data functions and data can be provided to help the brcmfmac driver to
++ * operate with the device in combination with the used platform.
++ */
++
++
++/**
++ * Note: the brcmfmac can be loaded as module or be statically built-in into
++ * the kernel. If built-in then do note that it uses module_init (and
++ * module_exit) routines which equal device_initcall. So if you intend to
++ * create a module with the platform specific data for the brcmfmac and have
++ * it built-in to the kernel then use a higher initcall then device_initcall
++ * (see init.h). If this is not done then brcmfmac will load without problems
++ * but will not pickup the platform data.
++ *
++ * When the driver does not "detect" platform driver data then it will continue
++ * without reporting anything and just assume there is no data needed. Which is
++ * probably true for most platforms.
++ */
++
++/**
++ * enum brcmf_bus_type - Bus type identifier. Currently SDIO, USB and PCIE are
++ * supported.
++ */
++enum brcmf_bus_type {
++ BRCMF_BUSTYPE_SDIO,
++ BRCMF_BUSTYPE_USB,
++ BRCMF_BUSTYPE_PCIE
++};
++
++
++/**
++ * struct brcmfmac_sdio_pd - SDIO Device specific platform data.
++ *
++ * @txglomsz: SDIO txglom size. Use 0 if default of driver is to be
++ * used.
++ * @drive_strength: is the preferred drive_strength to be used for the SDIO
++ * pins. If 0 then a default value will be used. This is
++ * the target drive strength, the exact drive strength
++ * which will be used depends on the capabilities of the
++ * device.
++ * @oob_irq_supported: does the board have support for OOB interrupts. SDIO
++ * in-band interrupts are relatively slow and for having
++ * less overhead on interrupt processing an out of band
++ * interrupt can be used. If the HW supports this then
++ * enable this by setting this field to true and configure
++ * the oob related fields.
++ * @oob_irq_nr,
++ * @oob_irq_flags: the OOB interrupt information. The values are used for
++ * registering the irq using request_irq function.
++ * @broken_sg_support: flag for broken sg list support of SDIO host controller.
++ * Set this to true if the SDIO host controller has higher
++ * align requirement than 32 bytes for each scatterlist
++ * item.
++ * @sd_head_align: alignment requirement for start of data buffer.
++ * @sd_sgentry_align: length alignment requirement for each sg entry.
++ * @reset: This function can get called if the device communication
++ * broke down. This functionality is particularly useful in
++ * case of SDIO type devices. It is possible to reset a
++ * dongle via sdio data interface, but it requires that
++ * this is fully functional. This function is chip/module
++ * specific and this function should return only after the
++ * complete reset has completed.
++ */
++struct brcmfmac_sdio_pd {
++ int txglomsz;
++ unsigned int drive_strength;
++ bool oob_irq_supported;
++ unsigned int oob_irq_nr;
++ unsigned long oob_irq_flags;
++ bool broken_sg_support;
++ unsigned short sd_head_align;
++ unsigned short sd_sgentry_align;
++ void (*reset)(void);
++};
++
++/**
++ * struct brcmfmac_pd_cc_entry - Struct for translating user space country code
++ * (iso3166) to firmware country code and
++ * revision.
++ *
++ * @iso3166: iso3166 alpha 2 country code string.
++ * @cc: firmware country code string.
++ * @rev: firmware country code revision.
++ */
++struct brcmfmac_pd_cc_entry {
++ char iso3166[BRCMFMAC_COUNTRY_BUF_SZ];
++ char cc[BRCMFMAC_COUNTRY_BUF_SZ];
++ s32 rev;
++};
++
++/**
++ * struct brcmfmac_pd_cc - Struct for translating country codes as set by user
++ * space to a country code and rev which can be used by
++ * firmware.
++ *
++ * @table_size: number of entries in table (> 0)
++ * @table: array of 1 or more elements with translation information.
++ */
++struct brcmfmac_pd_cc {
++ int table_size;
++ struct brcmfmac_pd_cc_entry table[0];
++};
++
++/**
++ * struct brcmfmac_pd_device - Device specific platform data. (id/rev/bus_type)
++ * is the unique identifier of the device.
++ *
++ * @id: ID of the device for which this data is. In case of SDIO
++ * or PCIE this is the chipid as identified by chip.c In
++ * case of USB this is the chipid as identified by the
++ * device query.
++ * @rev: chip revision, see id.
++ * @bus_type: The type of bus. Some chipid/rev exist for different bus
++ * types. Each bus type has its own set of settings.
++ * @feature_disable: Bitmask of features to disable (override), See feature.c
++ * in brcmfmac for details.
++ * @country_codes: If available, pointer to struct for translating country
++ * codes.
++ * @bus: Bus specific (union) device settings. Currently only
++ * SDIO.
++ */
++struct brcmfmac_pd_device {
++ unsigned int id;
++ unsigned int rev;
++ enum brcmf_bus_type bus_type;
++ unsigned int feature_disable;
++ struct brcmfmac_pd_cc *country_codes;
++ union {
++ struct brcmfmac_sdio_pd sdio;
++ } bus;
++};
++
++/**
++ * struct brcmfmac_platform_data - BRCMFMAC specific platform data.
++ *
++ * @power_on: This function is called by the brcmfmac driver when the module
++ * gets loaded. This can be particularly useful for low power
++ * devices. The platform spcific routine may for example decide to
++ * power up the complete device. If there is no use-case for this
++ * function then provide NULL.
++ * @power_off: This function is called by the brcmfmac when the module gets
++ * unloaded. At this point the devices can be powered down or
++ * otherwise be reset. So if an actual power_off is not supported
++ * but reset is supported by the devices then reset the devices
++ * when this function gets called. This can be particularly useful
++ * for low power devices. If there is no use-case for this
++ * function then provide NULL.
++ */
++struct brcmfmac_platform_data {
++ void (*power_on)(void);
++ void (*power_off)(void);
++ char *fw_alternative_path;
++ int device_count;
++ struct brcmfmac_pd_device devices[0];
++};
++
++
++#endif /* _LINUX_BRCMFMAC_PLATFORM_H */
projects / openwrt / svn-archive / archive.git / blobdiff