--- /dev/null
+From 39564b475ac5a589e6c22c43a08cbd283c295d2c Mon Sep 17 00:00:00 2001
+From: Baochen Qiang <quic_bqiang@quicinc.com>
+Date: Thu, 7 Sep 2023 09:56:06 +0800
+Subject: [PATCH] wifi: ath11k: fix boot failure with one MSI vector
+
+Commit 5b32b6dd96633 ("ath11k: Remove core PCI references from
+PCI common code") breaks with one MSI vector because it moves
+affinity setting after IRQ request, see below log:
+
+[ 1417.278835] ath11k_pci 0000:02:00.0: failed to receive control response completion, polling..
+[ 1418.302829] ath11k_pci 0000:02:00.0: Service connect timeout
+[ 1418.302833] ath11k_pci 0000:02:00.0: failed to connect to HTT: -110
+[ 1418.303669] ath11k_pci 0000:02:00.0: failed to start core: -110
+
+The detail is, if do affinity request after IRQ activated,
+which is done in request_irq(), kernel caches that request and
+returns success directly. Later when a subsequent MHI interrupt is
+fired, kernel will do the real affinity setting work, as a result,
+changs the MSI vector. However at that time host has configured
+old vector to hardware, so host never receives CE or DP interrupts.
+
+Fix it by setting affinity before registering MHI controller
+where host is, for the first time, doing IRQ request.
+
+Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
+Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
+Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-01160-QCAMSLSWPLZ-1
+
+Fixes: 5b32b6dd9663 ("ath11k: Remove core PCI references from PCI common code")
+Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
+Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20230907015606.16297-1-quic_bqiang@quicinc.com
+---
+ drivers/net/wireless/ath/ath11k/pci.c | 24 ++++++++++++------------
+ 1 file changed, 12 insertions(+), 12 deletions(-)
+
+--- a/drivers/net/wireless/ath/ath11k/pci.c
++++ b/drivers/net/wireless/ath/ath11k/pci.c
+@@ -852,10 +852,16 @@ unsupported_wcn6855_soc:
+ if (ret)
+ goto err_pci_disable_msi;
+
++ ret = ath11k_pci_set_irq_affinity_hint(ab_pci, cpumask_of(0));
++ if (ret) {
++ ath11k_err(ab, "failed to set irq affinity %d\n", ret);
++ goto err_pci_disable_msi;
++ }
++
+ ret = ath11k_mhi_register(ab_pci);
+ if (ret) {
+ ath11k_err(ab, "failed to register mhi: %d\n", ret);
+- goto err_pci_disable_msi;
++ goto err_irq_affinity_cleanup;
+ }
+
+ ret = ath11k_hal_srng_init(ab);
+@@ -876,12 +882,6 @@ unsupported_wcn6855_soc:
+ goto err_ce_free;
+ }
+
+- ret = ath11k_pci_set_irq_affinity_hint(ab_pci, cpumask_of(0));
+- if (ret) {
+- ath11k_err(ab, "failed to set irq affinity %d\n", ret);
+- goto err_free_irq;
+- }
+-
+ /* kernel may allocate a dummy vector before request_irq and
+ * then allocate a real vector when request_irq is called.
+ * So get msi_data here again to avoid spurious interrupt
+@@ -890,20 +890,17 @@ unsupported_wcn6855_soc:
+ ret = ath11k_pci_config_msi_data(ab_pci);
+ if (ret) {
+ ath11k_err(ab, "failed to config msi_data: %d\n", ret);
+- goto err_irq_affinity_cleanup;
++ goto err_free_irq;
+ }
+
+ ret = ath11k_core_init(ab);
+ if (ret) {
+ ath11k_err(ab, "failed to init core: %d\n", ret);
+- goto err_irq_affinity_cleanup;
++ goto err_free_irq;
+ }
+ ath11k_qmi_fwreset_from_cold_boot(ab);
+ return 0;
+
+-err_irq_affinity_cleanup:
+- ath11k_pci_set_irq_affinity_hint(ab_pci, NULL);
+-
+ err_free_irq:
+ ath11k_pcic_free_irq(ab);
+
+@@ -916,6 +913,9 @@ err_hal_srng_deinit:
+ err_mhi_unregister:
+ ath11k_mhi_unregister(ab_pci);
+
++err_irq_affinity_cleanup:
++ ath11k_pci_set_irq_affinity_hint(ab_pci, NULL);
++
+ err_pci_disable_msi:
+ ath11k_pci_free_msi(ab_pci);
+