break;
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -126,6 +126,55 @@ static void wpas_update_fils_connect_par
+@@ -127,6 +127,55 @@ static void wpas_update_fils_connect_par
#endif /* CONFIG_FILS && IEEE8021X_EAPOL */
/* Configure default/group WEP keys for static WEP */
int wpa_set_wep_keys(struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid)
{
-@@ -940,12 +989,16 @@ void wpa_supplicant_set_state(struct wpa
+@@ -941,12 +990,16 @@ void wpa_supplicant_set_state(struct wpa
sme_sched_obss_scan(wpa_s, 1);
wpa_s->new_connection = 1;
wpa_drv_set_operstate(wpa_s, 0);
#ifndef IEEE8021X_EAPOL
-@@ -2035,6 +2088,8 @@ void wpa_supplicant_associate(struct wpa
+@@ -2039,6 +2092,8 @@ void wpa_supplicant_associate(struct wpa
wpa_ssid_txt(ssid->ssid, ssid->ssid_len),
ssid->id);
wpas_notify_mesh_group_started(wpa_s, ssid);
#else /* CONFIG_MESH */
wpa_msg(wpa_s, MSG_ERROR,
"mesh mode support not included in the build");
-@@ -5707,6 +5762,16 @@ static int wpa_supplicant_init_iface(str
+@@ -5717,6 +5772,16 @@ static int wpa_supplicant_init_iface(str
sizeof(wpa_s->bridge_ifname));
}
/* RSNA Supplicant Key Management - INITIALIZE */
eapol_sm_notify_portEnabled(wpa_s->eapol, FALSE);
eapol_sm_notify_portValid(wpa_s->eapol, FALSE);
-@@ -6034,6 +6099,11 @@ static void wpa_supplicant_deinit_iface(
+@@ -6044,6 +6109,11 @@ static void wpa_supplicant_deinit_iface(
if (terminate)
wpa_msg(wpa_s, MSG_INFO, WPA_EVENT_TERMINATING);
--- a/hostapd/ctrl_iface.c
+++ b/hostapd/ctrl_iface.c
-@@ -2385,6 +2385,11 @@ static int hostapd_ctrl_iface_chan_switc
+@@ -2408,6 +2408,11 @@ static int hostapd_ctrl_iface_chan_switc
if (ret)
return ret;
/* Save CHAN_SWITCH VHT config */
--- a/src/ap/beacon.c
+++ b/src/ap/beacon.c
-@@ -1397,11 +1397,6 @@ int ieee802_11_set_beacon(struct hostapd
+@@ -1403,11 +1403,6 @@ int ieee802_11_set_beacon(struct hostapd
struct wpabuf *beacon, *proberesp, *assocresp;
int res, ret = -1;
hapd->beacon_set_done = 1;
if (ieee802_11_build_ap_params(hapd, ¶ms) < 0)
---- a/src/drivers/driver.h
-+++ b/src/drivers/driver.h
-@@ -4544,6 +4544,13 @@ enum wpa_event_type {
- EVENT_CH_SWITCH,
-
- /**
-+ * EVENT_CH_SWITCH - AP or GO will switch channels soon
-+ *
-+ * Described in wpa_event_data.ch_switch
-+ * */
-+ EVENT_CH_SWITCH_STARTED,
-+
-+ /**
- * EVENT_WNM - Request WNM operation
- *
- * This event can be used to request a WNM operation to be performed.
-@@ -5381,6 +5388,7 @@ union wpa_event_data {
-
- /**
- * struct ch_switch
-+ * @count: countdown until channel switch
- * @freq: Frequency of new channel in MHz
- * @ht_enabled: Whether this is an HT channel
- * @ch_offset: Secondary channel offset
-@@ -5389,6 +5397,7 @@ union wpa_event_data {
- * @cf2: Center frequency 2
- */
- struct ch_switch {
-+ int count;
- int freq;
- int ht_enabled;
- int ch_offset;
---- a/src/drivers/driver_nl80211_event.c
-+++ b/src/drivers/driver_nl80211_event.c
-@@ -534,7 +534,8 @@ static int calculate_chan_offset(int wid
- static void mlme_event_ch_switch(struct wpa_driver_nl80211_data *drv,
- struct nlattr *ifindex, struct nlattr *freq,
- struct nlattr *type, struct nlattr *bw,
-- struct nlattr *cf1, struct nlattr *cf2)
-+ struct nlattr *cf1, struct nlattr *cf2,
-+ struct nlattr *count)
- {
- struct i802_bss *bss;
- union wpa_event_data data;
-@@ -592,11 +593,15 @@ static void mlme_event_ch_switch(struct
- data.ch_switch.cf1 = nla_get_u32(cf1);
- if (cf2)
- data.ch_switch.cf2 = nla_get_u32(cf2);
-+ if (count)
-+ data.ch_switch.count = nla_get_u32(count);
-
- bss->freq = data.ch_switch.freq;
- drv->assoc_freq = data.ch_switch.freq;
-
-- wpa_supplicant_event(bss->ctx, EVENT_CH_SWITCH, &data);
-+ wpa_supplicant_event(bss->ctx,
-+ count ? EVENT_CH_SWITCH_STARTED : EVENT_CH_SWITCH,
-+ &data);
- }
-
-
-@@ -2508,6 +2513,7 @@ static void do_process_drv_event(struct
- tb[NL80211_ATTR_PMK],
- tb[NL80211_ATTR_PMKID]);
- break;
-+ case NL80211_CMD_CH_SWITCH_STARTED_NOTIFY:
- case NL80211_CMD_CH_SWITCH_NOTIFY:
- mlme_event_ch_switch(drv,
- tb[NL80211_ATTR_IFINDEX],
-@@ -2515,7 +2521,8 @@ static void do_process_drv_event(struct
- tb[NL80211_ATTR_WIPHY_CHANNEL_TYPE],
- tb[NL80211_ATTR_CHANNEL_WIDTH],
- tb[NL80211_ATTR_CENTER_FREQ1],
-- tb[NL80211_ATTR_CENTER_FREQ2]);
-+ tb[NL80211_ATTR_CENTER_FREQ2],
-+ tb[NL80211_ATTR_CH_SWITCH_COUNT]);
- break;
- case NL80211_CMD_DISCONNECT:
- mlme_event_disconnect(drv, tb[NL80211_ATTR_REASON_CODE],
---- a/wpa_supplicant/events.c
-+++ b/wpa_supplicant/events.c
-@@ -4176,6 +4176,60 @@ static void wpas_event_assoc_reject(stru
- }
-
-
-+static void
-+supplicant_ch_switch_started(struct wpa_supplicant *wpa_s,
-+ union wpa_event_data *data)
-+{
-+ char buf[256];
-+ size_t len = sizeof(buf);
-+ char *cmd = NULL;
-+ int width = 20;
-+ int ret;
-+
-+ if (!wpa_s->hostapd)
-+ return;
-+
-+ wpa_msg(wpa_s, MSG_INFO, WPA_EVENT_CHANNEL_SWITCH
-+ "count=%d freq=%d ht_enabled=%d ch_offset=%d ch_width=%s cf1=%d cf2=%d",
-+ data->ch_switch.count,
-+ data->ch_switch.freq,
-+ data->ch_switch.ht_enabled,
-+ data->ch_switch.ch_offset,
-+ channel_width_to_string(data->ch_switch.ch_width),
-+ data->ch_switch.cf1,
-+ data->ch_switch.cf2);
-+
-+ switch (data->ch_switch.ch_width) {
-+ case CHAN_WIDTH_20_NOHT:
-+ case CHAN_WIDTH_20:
-+ width = 20;
-+ break;
-+ case CHAN_WIDTH_40:
-+ width = 40;
-+ break;
-+ case CHAN_WIDTH_80:
-+ width = 80;
-+ break;
-+ case CHAN_WIDTH_160:
-+ case CHAN_WIDTH_80P80:
-+ width = 160;
-+ break;
-+ }
-+
-+ asprintf(&cmd, "CHAN_SWITCH %d %d sec_channel_offset=%d center_freq1=%d center_freq2=%d, bandwidth=%d auto-ht\n",
-+ data->ch_switch.count - 1,
-+ data->ch_switch.freq,
-+ data->ch_switch.ch_offset,
-+ data->ch_switch.cf1,
-+ data->ch_switch.cf2,
-+ width);
-+ ret = wpa_ctrl_request(wpa_s->hostapd, cmd, os_strlen(cmd), buf, &len, NULL);
-+ free(cmd);
-+
-+ if (ret < 0)
-+ wpa_printf(MSG_ERROR, "\nFailed to reload hostapd AP interfaces\n");
-+}
-+
- void supplicant_event(void *ctx, enum wpa_event_type event,
- union wpa_event_data *data)
- {
-@@ -4461,6 +4515,10 @@ void supplicant_event(void *ctx, enum wp
- data->rx_from_unknown.wds);
- break;
- #endif /* CONFIG_AP */
-+ case EVENT_CH_SWITCH_STARTED:
-+ supplicant_ch_switch_started(wpa_s, data);
-+ break;
-+
- case EVENT_CH_SWITCH:
- if (!data || !wpa_s->current_ssid)
- break;
projects / openwrt / staging / ynezz.git / blobdiff