packages: nvram: add NVRAM quirks for bcm53xx target

[openwrt/staging/mkresin.git] / package / utils / nvram / files / nvram-bcm47xx.init

diff --git a/package/utils/nvram/files/nvram-bcm47xx.init b/package/utils/nvram/files/nvram-bcm47xx.init
new file mode 100755 (executable)
index 0000000..4a2bcd1
--- /dev/null
+++ b/package/utils/nvram/files/nvram-bcm47xx.init
@@ -0,0 +1,98 @@
+#!/bin/sh /etc/rc.common
+# NVRAM setup
+#
+# This file handles the NVRAM quirks of various hardware of the bcm47xx target.
+
+START=02
+alias debug=${DEBUG:-:}
+
+nvram_default() {
+       [ -z "$(nvram get $1)" ] && nvram set "$1=$2"
+}
+
+nvram_set() { # for the linksys fixup part
+       [ "$(nvram get "$1")" = "$2" -a "$2" != "" ] || {
+               COMMIT=1
+               /usr/sbin/nvram set "$1=$2"
+       }
+}
+
+fixup_linksys() {
+       # work around braindead CFE defaults in linksys routers
+       boardtype=$(nvram get boardtype)
+       boardnum=$(nvram get boardnum)
+       boardflags=$(($(nvram get boardflags)))
+       adm_switch="$(( ($boardflags & 0x80) >> 7 ))"
+
+       [ -n "$(nvram get vxkilled)" ] && boardtype=0 # don't mess with the ram settings on the hacked cfe
+       case "$(( $boardtype ))" in
+               "1800") #0x708
+                       if [ "$adm_switch" = 0 ]; then
+                               nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))"
+                               [ "$COMMIT" = 1 ] && {
+                                       nvram_set clkfreq 216
+                                       nvram_set sdram_ncdl 0x0
+                                       nvram_set pa0itssit 62
+                                       nvram_set pa0b0 0x15eb
+                                       nvram_set pa0b1 0xfa82
+                                       nvram_set pa0b2 0xfe66
+                                       nvram_set pa0maxpwr 0x4e
+                               }
+                       fi
+               ;;
+               "1127") #0x467
+                       nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))"
+                       [ "$COMMIT" = 1 ] && {
+                               nvram_set sdram_ncdl 0x0
+                               nvram_set pa0itssit 62
+                               nvram_set pa0b0 0x168b
+                               nvram_set pa0b1 0xfabf
+                               nvram_set pa0b2 0xfeaf
+                               nvram_set pa0maxpwr 0x4e
+                       }
+               ;;
+               "1071") #0x042f
+                       # do sanity check first! max 0x0011 = 128mb
+                       SDRAM_INIT=$(printf %d $(/usr/sbin/nvram get sdram_init))
+                       [ "$SDRAM_INIT" -lt "9" -o "$SDRAM_INIT" -gt "17" ] && {
+                               # set this to default: 0x09 only if value is invaild like 16MB on Asus WL-500GP
+                               echo "sdram_init is invaild: $(printf 0x%04x $SDRAM_INIT), force to default!"
+                               nvram_set sdram_init 0x0009
+                       }
+                       # on WRT54G3GV2 set flag, so checksum errors of firmware image 2 don't stop the boot process
+                       noset_try_flag=$(nvram get noset_try_flag)
+                       [ "$noset_try_flag" = 0 ] && {
+                               echo "setting noset_try_flag to 1."
+                               nvram_set noset_try_flag 1
+                       }
+                       [ "$COMMIT" = 1 ] && {
+                               nvram_set sdram_ncdl 0x0
+                       }
+       esac
+}
+
+boot() {
+       # Don't do any fixups on the WGT634U
+       [ "$(cat /proc/diag/model)" = "Netgear WGT634U" ] && return
+
+       fixup_linksys
+
+       # OFDM Power Offset is set incorrectly on many boards.
+       # Setting it to 0 will increase the tx power to normal levels.
+       nvram_set opo 0x0
+
+       [ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
+               # if default wifi mac, set two higher than the lan mac
+               nvram set il0macaddr=$(nvram get et0macaddr|
+               awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}')
+       }
+
+       [ "$(nvram get et0macaddr)" = "00:90:4c:c0:00:08" ] && {
+               # OvisLink WL-1600GL mac workaround
+               nvram set et0macaddr=$(hexdump -n 6 -s 130976 -e '5/1 "%02x:" "%02x" ' /dev/mtd/0)
+               nvram set il0macaddr=$(nvram get et0macaddr|
+               awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}')
+       }
+
+       [ "$COMMIT" = "1" ] && nvram commit
+}