+++ /dev/null
-/*
- * $Id$
- *
- * Compex boards
- *
- * Copyright (C) 2007-2008 OpenWrt.org
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <adm5120_board.h>
-#include <adm5120_platform.h>
-#include <adm5120_irq.h>
-
-#define NP27G_GPIO_DEV_MASK (1 << ADM5120_GPIO_PIN5)
-#define NP28G_GPIO_DEV_MASK ( 1 << ADM5120_GPIO_PIN5 \
- | 1 << ADM5120_GPIO_PIN4)
-
-#define WP54_GPIO_DEV_MASK ( 1 << ADM5120_GPIO_PIN5 \
- | 1 << ADM5120_GPIO_PIN3)
-
-static struct adm5120_pci_irq wp54_pci_irqs[] __initdata = {
- PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static struct adm5120_pci_irq np28g_pci_irqs[] __initdata = {
- PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
- PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI0),
- PCIIRQ(3, 1, 2, ADM5120_IRQ_PCI1),
- PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2)
-};
-
-static struct mtd_partition wp54g_wrt_partitions[] = {
- {
- .name = "cfe",
- .offset = 0,
- .size = 0x050000,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "trx",
- .offset = MTDPART_OFS_APPEND,
- .size = 0x3A0000,
- } , {
- .name = "nvram",
- .offset = MTDPART_OFS_APPEND,
- .size = 0x010000,
- }
-};
-
-static struct platform_device *np2xg_devices[] __initdata = {
- &adm5120_flash0_device,
- &adm5120_hcd_device,
-};
-
-static struct platform_device *wp54_devices[] __initdata = {
- &adm5120_flash0_device,
- &adm5120_buttons_device,
-};
-
-unsigned char np27g_vlans[6] __initdata = {
- /* FIXME: untested */
- 0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-unsigned char np28g_vlans[6] __initdata = {
- 0x50, 0x42, 0x44, 0x48, 0x00, 0x00
-};
-
-unsigned char wp54_vlans[6] __initdata = {
- 0x41, 0x42, 0x00, 0x00, 0x00, 0x00
-};
-
-/*--------------------------------------------------------------------------*/
-
-static void switch_bank_gpio5(unsigned bank)
-{
- switch (bank) {
- case 0:
- gpio_set_value(ADM5120_GPIO_PIN5, 0);
- break;
- case 1:
- gpio_set_value(ADM5120_GPIO_PIN5, 1);
- break;
- }
-}
-
-static void wp54_reset(void)
-{
- gpio_set_value(ADM5120_GPIO_PIN3, 0);
-}
-
-static void np28g_reset(void)
-{
- gpio_set_value(ADM5120_GPIO_PIN4, 0);
-}
-
-static void __init np27g_setup(void)
-{
- gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
- gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
- /* setup data for flash0 device */
- adm5120_flash0_data.switch_bank = switch_bank_gpio5;
- adm5120_gpiodev_resource.start &= ~NP27G_GPIO_DEV_MASK;
-
- /* TODO: setup mac address */
-}
-
-static void __init np28g_setup(void)
-{
- gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
- gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
- gpio_request(ADM5120_GPIO_PIN4, NULL); /* for system reset */
- gpio_direction_output(ADM5120_GPIO_PIN4, 1);
-
- /* setup data for flash0 device */
- adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-
- adm5120_gpiodev_resource.start &= ~NP28G_GPIO_DEV_MASK;
-
- /* TODO: setup mac address */
-}
-
-static void __init wp54_setup(void)
-{
- gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
- gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
- gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */
- gpio_direction_output(ADM5120_GPIO_PIN3, 1);
-
- /* setup data for flash0 device */
- adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-
- adm5120_buttons_data.nbuttons = 1;
- adm5120_buttons[0].desc = "reset button";
- adm5120_buttons[0].gpio = ADM5120_GPIO_PIN4;
-
- adm5120_gpiodev_resource.start &= ~WP54_GPIO_DEV_MASK;
-
- /* TODO: setup mac address */
-}
-
-static void __init wp54_wrt_setup(void)
-{
- wp54_setup();
-
- adm5120_flash0_data.nr_parts = ARRAY_SIZE(wp54g_wrt_partitions);
- adm5120_flash0_data.parts = wp54g_wrt_partitions;
-
- /* TODO: setup mac address */
-}
-
-/*--------------------------------------------------------------------------*/
-
-ADM5120_BOARD_START(NP27G, "Compex NetPassage 27G")
- .board_setup = np27g_setup,
- .eth_num_ports = 5,
- .eth_vlans = np27g_vlans,
- .num_devices = ARRAY_SIZE(np2xg_devices),
- .devices = np2xg_devices,
- /* TODO: add PCI IRQ map */
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(NP28G, "Compex NetPassage 28G")
- .board_setup = np28g_setup,
- .board_reset = np28g_reset,
- .eth_num_ports = 4,
- .eth_vlans = np28g_vlans,
- .num_devices = ARRAY_SIZE(np2xg_devices),
- .devices = np2xg_devices,
- .pci_nr_irqs = ARRAY_SIZE(np28g_pci_irqs),
- .pci_irq_map = np28g_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(WP54AG, "Compex WP54AG")
- .board_setup = wp54_setup,
- .board_reset = wp54_reset,
- .eth_num_ports = 2,
- .eth_vlans = wp54_vlans,
- .num_devices = ARRAY_SIZE(wp54_devices),
- .devices = wp54_devices,
- .pci_nr_irqs = ARRAY_SIZE(wp54_pci_irqs),
- .pci_irq_map = wp54_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(WP54G, "Compex WP54G")
- .board_setup = wp54_setup,
- .board_reset = wp54_reset,
- .eth_num_ports = 2,
- .eth_vlans = wp54_vlans,
- .num_devices = ARRAY_SIZE(wp54_devices),
- .devices = wp54_devices,
- .pci_nr_irqs = ARRAY_SIZE(wp54_pci_irqs),
- .pci_irq_map = wp54_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(WP54G_WRT, "Compex WP54G-WRT")
- .board_setup = wp54_wrt_setup,
- .board_reset = wp54_reset,
- .eth_num_ports = 2,
- .eth_vlans = wp54_vlans,
- .num_devices = ARRAY_SIZE(wp54_devices),
- .devices = wp54_devices,
- .pci_nr_irqs = ARRAY_SIZE(wp54_pci_irqs),
- .pci_irq_map = wp54_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(WPP54AG, "Compex WPP54AG")
- .board_setup = wp54_setup,
- .board_reset = wp54_reset,
- .eth_num_ports = 2,
- .eth_vlans = wp54_vlans,
- .num_devices = ARRAY_SIZE(wp54_devices),
- .devices = wp54_devices,
- .pci_nr_irqs = ARRAY_SIZE(wp54_pci_irqs),
- .pci_irq_map = wp54_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(WPP54G, "Compex WPP54G")
- .board_setup = wp54_setup,
- .board_reset = wp54_reset,
- .eth_num_ports = 2,
- .eth_vlans = wp54_vlans,
- .num_devices = ARRAY_SIZE(wp54_devices),
- .devices = wp54_devices,
- .pci_nr_irqs = ARRAY_SIZE(wp54_pci_irqs),
- .pci_irq_map = wp54_pci_irqs,
-ADM5120_BOARD_END
projects / openwrt / svn-archive / archive.git / blobdiff