Add ar7-2.6 port (marked as broken for now).

[openwrt/svn-archive/archive.git] / target / linux / ar7-2.6 / files / include / asm-mips / ar7 / ar7.h

diff --git a/target/linux/ar7-2.6/files/include/asm-mips/ar7/ar7.h b/target/linux/ar7-2.6/files/include/asm-mips/ar7/ar7.h
new file mode 100644 (file)
index 0000000..fe51a8d
--- /dev/null
+++ b/target/linux/ar7-2.6/files/include/asm-mips/ar7/ar7.h
@@ -0,0 +1,153 @@
+/*
+ * $Id$
+ * 
+ * Copyright (C) 2006, 2007 OpenWrt.org
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __AR7_H__
+#define __AR7_H__
+
+#include <asm/addrspace.h>
+#include <linux/delay.h>
+
+#define AR7_REGS_BASE 0x08610000
+
+#define AR7_REGS_MAC0   (AR7_REGS_BASE + 0x0000)
+#define AR7_REGS_EMIF   (AR7_REGS_BASE + 0x0800)
+#define AR7_REGS_GPIO   (AR7_REGS_BASE + 0x0900)
+#define AR7_REGS_POWER  (AR7_REGS_BASE + 0x0a00)
+#define AR7_REGS_WDT    (AR7_REGS_BASE + 0x0b00)
+#define AR7_REGS_UART0  (AR7_REGS_BASE + 0x0e00)
+#define AR7_REGS_UART1  (AR7_REGS_BASE + 0x0f00)
+#define AR7_REGS_RESET  (AR7_REGS_BASE + 0x1600)
+#define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800)
+#define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1C00)
+#define AR7_REGS_MDIO   (AR7_REGS_BASE + 0x1E00)
+#define AR7_REGS_IRQ    (AR7_REGS_BASE + 0x2400)
+#define AR7_REGS_MAC1   (AR7_REGS_BASE + 0x2800)
+
+#define  AR7_RESET_PEREPHERIAL 0x0
+#define  AR7_RESET_SOFTWARE    0x4
+#define  AR7_RESET_STATUS      0x8
+
+#define AR7_RESET_BIT_MDIO   22
+
+/* GPIO control registers */
+#define  AR7_GPIO_INPUT  0x0
+#define  AR7_GPIO_OUTPUT 0x4
+#define  AR7_GPIO_DIR    0x8
+#define  AR7_GPIO_ENABLE 0xC
+
+#define AR7_GPIO_BIT_STATUS_LED   8
+
+
+/* Interrupts */
+#define AR7_IRQ_UART0  15
+#define AR7_IRQ_UART1  16
+
+struct plat_cpmac_data {
+       int reset_bit;
+       int power_bit;
+       u32 phy_mask;
+       char dev_addr[6];
+};
+
+extern char *prom_getenv(char *envname);
+
+/* A bunch of small bit-toggling functions */
+static inline u32 get_chip_id(void)
+{
+       return *((u16 *)KSEG1ADDR(AR7_REGS_GPIO + 0x14));
+}
+
+static inline int ar7_cpu_freq(void)
+{
+       u16 chip_id = get_chip_id();
+       switch (chip_id) {
+       case 0x5:
+               return 150000000;
+       case 0x18:
+       case 0x2b:
+               return 211968000;
+       default:
+               return 150000000;
+       }
+}
+
+static inline int ar7_bus_freq(void)
+{
+       u16 chip_id = get_chip_id();
+       switch (chip_id) {
+       case 0x5:
+               return 125000000;
+       case 0x18:
+       case 0x2b:
+               return 105984000;
+       default:
+               return 125000000;
+       }
+}
+#define ar7_cpmac_freq ar7_bus_freq
+
+static inline int ar7_has_high_cpmac(void)
+{
+       u16 chip_id = get_chip_id();
+       switch (chip_id) {
+       case 0x18:
+       case 0x2b:
+               return 0;
+       default:
+               return 1;
+       }
+}
+#define ar7_has_high_vlynq ar7_has_high_cpmac
+
+static inline void ar7_device_enable(u32 bit)
+{
+       volatile u32 *reset_reg = (u32 *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+       *reset_reg |= (1 << bit);       
+       mdelay(20);
+}
+
+static inline void ar7_device_disable(u32 bit)
+{
+       volatile u32 *reset_reg = (u32 *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+       *reset_reg &= ~(1 << bit);
+       mdelay(20);
+}
+
+static inline void ar7_device_reset(u32 bit)
+{
+       ar7_device_disable(bit);
+       ar7_device_enable(bit);
+}
+
+static inline void ar7_device_on(u32 bit)
+{
+       volatile u32 *power_reg = (u32 *)KSEG1ADDR(AR7_REGS_POWER);
+       *power_reg |= (1 << bit);
+       mdelay(20);
+}
+
+static inline void ar7_device_off(u32 bit)
+{
+       volatile u32 *power_reg = (u32 *)KSEG1ADDR(AR7_REGS_POWER);
+       *power_reg &= ~(1 << bit);
+       mdelay(20);
+}
+
+#endif