ar71xx: remove AP113 reference design board support

[openwrt/staging/yousong.git] / target / linux / ar71xx / base-files / etc / board.d / 01_leds

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 29ee5d7b12a2cbb5ad5262367a995cbfbee5ba84..dcdaab022d270c2d1024c0676fe123a556152d38 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -45,7 +45,6 @@ arduino-yun)
        ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt"
        ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1"
        ;;
-ap113|\
 db120)
        ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1"
        ;;
@@ -57,6 +56,28 @@ ap147-010)
        ucidef_set_led_switch "lan4" "LAN4" "ap147:green:lan4" "switch0" "0x02"
        ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "ap147:green:wlan-2g" "phy0tpt"
        ;;
+ap90q|\
+cpe830|\
+cpe870|\
+dr531)
+       ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
+       ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
+
+       case "$board" in
+       ap90q)
+               ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
+               ;;
+       cpe830|\
+       cpe870)
+               ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
+               ucidef_set_rssimon "wlan0" "200000" "1"
+               ucidef_set_led_rssi "rssilow" "RSSILOW" "$board:green:link1" "wlan0" "1" "100" "0" "13"
+               ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$board:green:link2" "wlan0" "26" "100" "-25" "13"
+               ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$board:green:link3" "wlan0" "51" "100" "-50" "13"
+               ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$board:green:link4" "wlan0" "76" "100" "-75" "13"
+               ;;
+       esac
+       ;;
 bhr-4grv2)
        ucidef_set_led_default "power" "POWER" "buffalo:green:power" "1"
        ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0"
@@ -152,10 +173,6 @@ cr5000)
        ucidef_set_led_wlan "wlan" "WLAN" "pcs:blue:wlan" "phy0tpt"
        ucidef_set_led_usbdev "usb" "USB" "pcs:white:wps" "1-1"
        ;;
-dr531)
-       ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
-       ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
-       ;;
 dragino2)
        ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
        ucidef_set_led_netdev "lan" "LAN" "$board:red:lan" "eth0"
@@ -426,6 +443,9 @@ som9331)
        ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
        ucidef_set_led_usbdev "usb" "USB" "$board:green:system" "1-1"
        ;;
+sr3200)
+       ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt"
+       ;;
 tellstick-znet-lite)
        ucidef_set_led_netdev "lan_act" "LANACT" "tellstick:green:lan" "eth0" "tx rx"
        ucidef_set_led_netdev "lan_link" "LANLINK" "tellstick:orange:lan" "eth0" "link"
@@ -507,6 +527,10 @@ tl-wa750re)
        ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:orange:signal4" "wlan0" "60" "100" "-59" "13"
        ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:orange:signal5" "wlan0" "80" "100" "-79" "13"
        ;;
+tl-wa801nd-v3)
+       ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth1"
+       ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
+       ;;
 tl-wa850re)
        ucidef_set_led_netdev "lan" "LAN" "tp-link:blue:lan" "eth0"
        ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:wlan" "phy0tpt"
@@ -716,6 +740,9 @@ wzr-hp-g300nh)
        ucidef_set_led_netdev "router" "Router" "buffalo:green:router" "eth1"
        ucidef_set_led_usbdev "usb" "USB" "buffalo:blue:usb" "1-1"
        ;;
+xd3200)
+       ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:blue:wlan2g" "phy1tpt"
+       ;;
 z1)
        ucidef_set_led_netdev "wlan1" "WLAN1" "$board:blue:tricolor0" "wlan1"
        ;;