rtl8366_smi: move RTL8366S driver into a separate file

[openwrt/staging/wigyori.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-dir-825-b1.c

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c
index e80a992b415f590dc0314a272e2888521cb3d2a7..d8b26eeb1ae3b133843da12f90d799735b7954b1 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c
@@ -14,7 +14,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/delay.h>
-#include <linux/rtl8366_smi.h>
+#include <linux/rtl8366s.h>
 
 #include <asm/mach-ar71xx/ar71xx.h>
 
@@ -130,16 +130,16 @@ static struct gpio_button dir825b1_gpio_buttons[] __initdata = {
        }
 };
 
-static struct rtl8366_smi_platform_data dir825b1_rtl8366_smi_data = {
+static struct rtl8366s_platform_data dir825b1_rtl8366s_data = {
        .gpio_sda        = DIR825B1_GPIO_RTL8366_SDA,
        .gpio_sck        = DIR825B1_GPIO_RTL8366_SCK,
 };
 
-static struct platform_device dir825b1_rtl8366_smi_device = {
-       .name           = "rtl8366-smi",
+static struct platform_device dir825b1_rtl8366s_device = {
+       .name           = RTL8366S_DRIVER_NAME,
        .id             = -1,
        .dev = {
-               .platform_data  = &dir825b1_rtl8366_smi_data,
+               .platform_data  = &dir825b1_rtl8366s_data,
        }
 };
 
@@ -155,13 +155,13 @@ static void __init dir825b1_setup(void)
 
        ar71xx_add_device_mdio(0x0);
 
-       ar71xx_eth0_data.mii_bus_dev = &dir825b1_rtl8366_smi_device.dev;
+       ar71xx_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
        ar71xx_eth0_data.speed = SPEED_1000;
        ar71xx_eth0_data.duplex = DUPLEX_FULL;
        ar71xx_eth0_pll_data.pll_1000 = 0x11110000;
 
-       ar71xx_eth1_data.mii_bus_dev = &dir825b1_rtl8366_smi_device.dev;
+       ar71xx_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
        ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
        ar71xx_eth1_data.phy_mask = 0x10;
        ar71xx_eth1_pll_data.pll_1000 = 0x11110000;
@@ -180,7 +180,7 @@ static void __init dir825b1_setup(void)
 
        ar71xx_add_device_usb();
 
-       platform_device_register(&dir825b1_rtl8366_smi_device);
+       platform_device_register(&dir825b1_rtl8366s_device);
 
        ap94_pci_init((u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0),
                      (u8 *) KSEG1ADDR(DIR825B1_MAC_LOCATION_0),