#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
+#include "machtype.h"
#include "devices.h"
#include "dev-ar913x-wmac.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
+#include "dev-usb.h"
#define MZK_W04NU_GPIO_LED_USB 0
#define MZK_W04NU_GPIO_LED_STATUS 1
.desc = "reset",
.type = EV_KEY,
.code = BTN_0,
- .threshold = 5,
+ .threshold = 3,
.gpio = MZK_W04NU_GPIO_BTN_RESET,
.active_low = 1,
}, {
.desc = "wps",
.type = EV_KEY,
.code = BTN_1,
- .threshold = 5,
+ .threshold = 3,
.gpio = MZK_W04NU_GPIO_BTN_WPS,
.active_low = 1,
}, {
.desc = "aprouter",
.type = EV_KEY,
.code = BTN_2,
- .threshold = 5,
+ .threshold = 3,
.gpio = MZK_W04NU_GPIO_BTN_APROUTER,
.active_low = 0,
}
static void __init mzk_w04nu_setup(void)
{
- u8 *mac = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
- ar71xx_set_mac_base(mac);
+ ar71xx_set_mac_base(eeprom);
ar71xx_add_device_mdio(0x0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ar71xx_eth0_data.phy_mask = 0xf;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth0_data.has_ar8216 = 1;
mzk_w04nu_gpio_buttons);
ar71xx_add_device_usb();
- ar913x_add_device_wmac();
+ ar913x_add_device_wmac(eeprom, NULL);
}
-MIPS_MACHINE(AR71XX_MACH_MZK_W04NU, "Planex MZK-W04NU", mzk_w04nu_setup);
+MIPS_MACHINE(AR71XX_MACH_MZK_W04NU, "MZK-W04NU", "Planex MZK-W04NU",
+ mzk_w04nu_setup);