* by the Free Software Foundation.
*/
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
-#include <asm/mach-ar71xx/pci.h>
#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
+#include "dev-pb42-pci.h"
+#include "dev-usb.h"
-static struct spi_board_info pb42_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- }
-};
+#define PB42_BUTTONS_POLL_INTERVAL 20
+
+#define PB42_GPIO_BTN_SW4 8
+#define PB42_GPIO_BTN_SW5 3
-static struct ar71xx_pci_irq pb42_pci_irqs[] __initdata = {
+static struct gpio_button pb42_gpio_buttons[] __initdata = {
{
- .slot = 0,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV0,
- }, {
- .slot = 1,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV1,
- }, {
- .slot = 2,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV2,
+ .desc = "sw4",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .threshold = 5,
+ .gpio = PB42_GPIO_BTN_SW4,
+ .active_low = 1,
+ } , {
+ .desc = "sw5",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .threshold = 5,
+ .gpio = PB42_GPIO_BTN_SW5,
+ .active_low = 1,
}
};
+#define PB42_WAN_PHYMASK BIT(20)
+#define PB42_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19))
+#define PB42_MDIO_PHYMASK (PB42_LAN_PHYMASK | PB42_WAN_PHYMASK)
+
static void __init pb42_init(void)
{
- ar71xx_add_device_spi(NULL, pb42_spi_info,
- ARRAY_SIZE(pb42_spi_info));
+ ar71xx_add_device_m25p80(NULL);
- ar71xx_add_device_mdio(0xffe0ffff);
+ ar71xx_add_device_mdio(~PB42_MDIO_PHYMASK);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ar71xx_eth0_data.phy_mask = 0x000f0000;
+ ar71xx_eth0_data.phy_mask = PB42_WAN_PHYMASK;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ar71xx_eth1_data.phy_mask = 0x00100000;
+ ar71xx_eth1_data.phy_mask = PB42_LAN_PHYMASK;
+ ar71xx_eth1_data.speed = SPEED_100;
+ ar71xx_eth1_data.duplex = DUPLEX_FULL;
ar71xx_add_device_eth(0);
ar71xx_add_device_eth(1);
- ar71xx_add_device_usb();
+ ar71xx_add_device_gpio_buttons(-1, PB42_BUTTONS_POLL_INTERVAL,
+ ARRAY_SIZE(pb42_gpio_buttons),
+ pb42_gpio_buttons);
- ar71xx_pci_init(ARRAY_SIZE(pb42_pci_irqs), pb42_pci_irqs);
+ pb42_pci_init();
}
MIPS_MACHINE(AR71XX_MACH_PB42, "Atheros PB42", pb42_init);