* by the Free Software Foundation.
*/
-#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/input.h>
-
-#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
-#include <asm/mach-ar71xx/pci.h>
+#include "machtype.h"
#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ap91-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
#define TL_WR741ND_GPIO_LED_QSS 0
#define TL_WR741ND_GPIO_LED_SYSTEM 1
} , {
.name = "kernel",
.offset = 0x020000,
- .size = 0x120000,
+ .size = 0x140000,
} , {
.name = "rootfs",
- .offset = 0x140000,
- .size = 0x2b0000,
+ .offset = 0x160000,
+ .size = 0x290000,
} , {
.name = "art",
.offset = 0x3f0000,
#endif
};
-static struct spi_board_info tl_wr741nd_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- .platform_data = &tl_wr741nd_flash_data,
- }
-};
-
static struct gpio_led tl_wr741nd_leds_gpio[] __initdata = {
{
.name = "tl-wr741nd:green:system",
.desc = "reset",
.type = EV_KEY,
.code = BTN_0,
- .threshold = 5,
+ .threshold = 3,
.gpio = TL_WR741ND_GPIO_BTN_RESET,
.active_low = 1,
}, {
.desc = "qss",
.type = EV_KEY,
.code = BTN_1,
- .threshold = 5,
+ .threshold = 3,
.gpio = TL_WR741ND_GPIO_BTN_QSS,
.active_low = 1,
}
};
-static struct ar71xx_pci_irq tl_wr741nd_pci_irqs[] __initdata = {
- {
- .slot = 0,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV0,
- }
-};
-
static void __init tl_wr741nd_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
ar71xx_set_mac_base(mac);
ar71xx_add_device_mdio(0x0);
ar71xx_eth0_data.phy_mask = 0x0;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
+ ar71xx_eth0_data.fifo_cfg1 = 0x0fff0000;
+ ar71xx_eth0_data.fifo_cfg2 = 0x00001fff;
+ ar71xx_eth0_data.fifo_cfg3 = 0x008001ff;
/* LAN ports */
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.phy_mask = 0x0;
ar71xx_eth1_data.speed = SPEED_1000;
ar71xx_eth1_data.duplex = DUPLEX_FULL;
+ ar71xx_eth1_data.fifo_cfg1 = 0x0fff0000;
+ ar71xx_eth1_data.fifo_cfg2 = 0x00001fff;
+ ar71xx_eth1_data.fifo_cfg3 = 0x008001ff;
ar71xx_add_device_eth(1);
ar71xx_add_device_eth(0);
- ar71xx_add_device_spi(NULL, tl_wr741nd_spi_info,
- ARRAY_SIZE(tl_wr741nd_spi_info));
+ ar71xx_add_device_m25p80(&tl_wr741nd_flash_data);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio),
tl_wr741nd_leds_gpio);
ARRAY_SIZE(tl_wr741nd_gpio_buttons),
tl_wr741nd_gpio_buttons);
- ar71xx_pci_init(ARRAY_SIZE(tl_wr741nd_pci_irqs), tl_wr741nd_pci_irqs);
+ ap91_pci_init(ee, NULL);
}
-MIPS_MACHINE(AR71XX_MACH_TL_WR741ND, "TP-LINK TL-WR741ND", tl_wr741nd_setup);
+MIPS_MACHINE(AR71XX_MACH_TL_WR741ND, "TL-WR741ND", "TP-LINK TL-WR741ND",
+ tl_wr741nd_setup);