Add support for Ubiquiti UniFi AP

[openwrt/openwrt.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-ubnt.c

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c
index 5af18a7e05cac361227763963b6340c475d3ee3d..e99542f2b8a3929330ce0b307abfd79b6099e593 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ubnt.c
@@ -281,3 +281,40 @@ static void __init ubnt_nano_m_setup(void)
 
 MIPS_MACHINE(AR71XX_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M",
             ubnt_nano_m_setup);
+
+static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = {
+       {
+               .name           = "ubnt:orange:dome",
+               .gpio           = 1,
+               .active_low     = 0,
+       }, {
+               .name           = "ubnt:green:dome",
+               .gpio           = 0,
+               .active_low     = 0,
+       }
+};
+
+static void __init ubnt_unifi_setup(void)
+{
+       u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+       u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+       ar71xx_add_device_m25p80(NULL);
+
+       ar71xx_add_device_mdio(~0);
+
+       ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
+       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+       ar71xx_eth0_data.speed = SPEED_100;
+       ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+       ar71xx_add_device_eth(0);
+
+       ap91_pci_init(ee, NULL);
+
+       ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio),
+                                       ubnt_unifi_leds_gpio);
+}
+
+MIPS_MACHINE(AR71XX_MACH_UBNT_UNIFI, "UBNT-XM", "Ubiquiti UniFi",
+            ubnt_unifi_setup);