* by the Free Software Foundation.
*/
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/input.h>
-
-#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
-#include <asm/mach-ar71xx/pci.h>
+#include "machtype.h"
#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ap91-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-pb42-pci.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
#define UBNT_RS_GPIO_LED_RF 2
#define UBNT_RS_GPIO_SW4 8
#define UBNT_LS_SR71_GPIO_LED_D27 6
#define UBNT_LS_SR71_GPIO_LED_D28 7
-#define UBNT_BUTTONS_POLL_INTERVAL 20
+#define UBNT_M_GPIO_LED_L1 0
+#define UBNT_M_GPIO_LED_L2 1
+#define UBNT_M_GPIO_LED_L3 11
+#define UBNT_M_GPIO_LED_L4 7
+#define UBNT_M_GPIO_BTN_RESET 12
-static struct spi_board_info ubnt_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- }
-};
-
-static struct ar71xx_pci_irq ubnt_pci_irqs[] __initdata = {
- {
- .slot = 0,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV0,
- }, {
- .slot = 1,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV1,
- }, {
- .slot = 2,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV2,
- }
-};
+#define UBNT_BUTTONS_POLL_INTERVAL 20
static struct gpio_led ubnt_rs_leds_gpio[] __initdata = {
{
}
};
+static struct gpio_led ubnt_m_leds_gpio[] __initdata = {
+ {
+ .name = "ubnt:red:link1",
+ .gpio = UBNT_M_GPIO_LED_L1,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:orange:link2",
+ .gpio = UBNT_M_GPIO_LED_L2,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:green:link3",
+ .gpio = UBNT_M_GPIO_LED_L3,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:green:link4",
+ .gpio = UBNT_M_GPIO_LED_L4,
+ .active_low = 0,
+ }
+};
+
static struct gpio_button ubnt_gpio_buttons[] __initdata = {
{
.desc = "sw4",
}
};
+static struct gpio_button ubnt_m_gpio_buttons[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .threshold = 5,
+ .gpio = UBNT_M_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
static void __init ubnt_generic_setup(void)
{
- ar71xx_add_device_spi(NULL, ubnt_spi_info,
- ARRAY_SIZE(ubnt_spi_info));
+ ar71xx_add_device_m25p80(NULL);
ar71xx_add_device_gpio_buttons(-1, UBNT_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(ubnt_gpio_buttons),
ubnt_gpio_buttons);
- ar71xx_pci_init(ARRAY_SIZE(ubnt_pci_irqs), ubnt_pci_irqs);
+ pb42_pci_init();
}
#define UBNT_RS_WAN_PHYMASK (1 << 20)
#define UBNT_RS_LAN_PHYMASK ((1 << 16) | (1 << 17) | (1 << 18) | (1 << 19))
+#define UBNT_RSPRO_WAN_PHYMASK (1 << 4)
+#define UBNT_RSPRO_LAN_PHYMASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 << 3))
+
static void __init ubnt_rs_setup(void)
{
ubnt_generic_setup();
{
ubnt_generic_setup();
+ ar71xx_add_device_mdio(~(UBNT_RSPRO_WAN_PHYMASK | UBNT_RSPRO_LAN_PHYMASK));
+
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ar71xx_eth0_data.phy_mask = UBNT_RSPRO_WAN_PHYMASK;
+
+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ar71xx_eth1_data.phy_mask = UBNT_RSPRO_LAN_PHYMASK;
+
+ ar71xx_eth1_data.speed = SPEED_1000;
+ ar71xx_eth1_data.duplex = DUPLEX_FULL;
+
+ ar71xx_add_device_eth(0);
+ ar71xx_add_device_eth(1);
+
ar71xx_add_device_usb();
+
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
+ ubnt_rs_leds_gpio);
}
MIPS_MACHINE(AR71XX_MACH_UBNT_RSPRO, "Ubiquiti RouterStation Pro",
}
MIPS_MACHINE(AR71XX_MACH_UBNT_LSSR71, "Ubiquiti LS-SR71", ubnt_lssr71_setup);
+
+static void __init ubnt_m_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ar71xx_set_mac_base(mac);
+
+ ar71xx_add_device_m25p80(NULL);
+
+ ar71xx_add_device_mdio(~0);
+
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ar71xx_eth0_data.phy_mask = 0;
+ ar71xx_eth0_data.speed = SPEED_100;
+ ar71xx_eth0_data.duplex = DUPLEX_FULL;
+ ar71xx_eth0_data.fifo_cfg1 = 0x0010ffff;
+ ar71xx_eth0_data.fifo_cfg2 = 0x015500aa;
+ ar71xx_eth0_data.fifo_cfg3 = 0x01f00140;
+
+ ar71xx_add_device_eth(0);
+
+ ap91_pci_init(ee, NULL);
+
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_m_leds_gpio),
+ ubnt_m_leds_gpio);
+
+ ar71xx_add_device_gpio_buttons(-1, UBNT_BUTTONS_POLL_INTERVAL,
+ ARRAY_SIZE(ubnt_m_gpio_buttons),
+ ubnt_m_gpio_buttons);
+}
+
+static void __init ubnt_rocket_m_setup(void)
+{
+ ubnt_m_setup();
+ ar71xx_add_device_usb();
+}
+
+MIPS_MACHINE(AR71XX_MACH_UBNT_BULLET_M, "Ubiquiti Bullet M", ubnt_m_setup);
+MIPS_MACHINE(AR71XX_MACH_UBNT_ROCKET_M, "Ubiquiti Rocket M", ubnt_rocket_m_setup);
+
+/* TODO detect the second ethernet port and use one
+ init function for all Ubiquiti MIMO series products */
+static void __init ubnt_nano_m_setup(void)
+{
+ ubnt_m_setup();
+
+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ar71xx_eth1_data.phy_mask = 0;
+ ar71xx_eth1_data.speed = SPEED_1000;
+ ar71xx_eth1_data.duplex = DUPLEX_FULL;
+ ar71xx_eth1_data.fifo_cfg1 = 0x0010ffff;
+ ar71xx_eth1_data.fifo_cfg2 = 0x015500aa;
+ ar71xx_eth1_data.fifo_cfg3 = 0x01f00140;
+
+ ar71xx_add_device_eth(1);
+}
+
+MIPS_MACHINE(AR71XX_MACH_UBNT_NANO_M, "Ubiquiti Nanostation M", ubnt_nano_m_setup);
projects / openwrt / svn-archive / archive.git / blobdiff