ar71xx: reduce button threshold values

[openwrt/svn-archive/archive.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-wp543.c

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wp543.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wp543.c
index ef2ef05759a2c2b54fef9a8bd6df169f093ab827..bf8b9f562374ff14567c037606f10513d7d01fa2 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wp543.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wp543.c
@@ -1,7 +1,7 @@
 /*
- *  Compex WP543 board support
+ *  Compex WP543/WPJ543 board support
  *
- *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
  *
  *  This program is free software; you can redistribute it and/or modify it
@@ -9,17 +9,18 @@
  *  by the Free Software Foundation.
  */
 
-#include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/input.h>
 
-#include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
-#include <asm/mach-ar71xx/pci.h>
-#include <asm/mach-ar71xx/platform.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-pb42-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
 
 #define WP543_GPIO_SW6         2
 #define WP543_GPIO_LED_1       3
@@ -31,54 +32,6 @@
 
 #define WP543_BUTTONS_POLL_INTERVAL    20
 
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition wp543_partitions[] = {
-       {
-               .name   = "myloader",
-               .offset = 0,
-               .size   = 0x20000,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "kernel",
-               .offset = 0x30000,
-               .size   = 0xd0000,
-       } , {
-               .name   = "rootfs",
-               .offset = 0x100000,
-               .size   = 0x100000,
-       }
-};
-#endif /* CONFIG_MTD_PARTITIONS */
-
-static struct flash_platform_data wp543_flash_data = {
-#ifdef CONFIG_MTD_PARTITIONS
-       .parts          = wp543_partitions,
-       .nr_parts       = ARRAY_SIZE(wp543_partitions),
-#endif
-};
-
-static struct spi_board_info wp543_spi_info[] = {
-       {
-               .bus_num        = 0,
-               .chip_select    = 0,
-               .max_speed_hz   = 25000000,
-               .modalias       = "m25p80",
-               .platform_data  = &wp543_flash_data,
-       }
-};
-
-static struct ar71xx_pci_irq wp543_pci_irqs[] __initdata = {
-       {
-               .slot   = 1,
-               .pin    = 1,
-               .irq    = AR71XX_PCI_IRQ_DEV0,
-       }, {
-               .slot   = 1,
-               .pin    = 2,
-               .irq    = AR71XX_PCI_IRQ_DEV1,
-       }
-};
-
 static struct gpio_led wp543_leds_gpio[] __initdata = {
        {
                .name           = "wp543:green:led1",
@@ -108,30 +61,32 @@ static struct gpio_button wp543_gpio_buttons[] __initdata = {
                .desc           = "sw6",
                .type           = EV_KEY,
                .code           = BTN_0,
-               .threshold      = 5,
+               .threshold      = 3,
                .gpio           = WP543_GPIO_SW6,
        }, {
                .desc           = "sw4",
                .type           = EV_KEY,
                .code           = BTN_1,
-               .threshold      = 5,
+               .threshold      = 3,
                .gpio           = WP543_GPIO_SW4,
        }
 };
 
 static void __init wp543_setup(void)
 {
-       ar71xx_add_device_spi(NULL, wp543_spi_info, ARRAY_SIZE(wp543_spi_info));
+       ar71xx_add_device_m25p80(NULL);
 
        ar71xx_add_device_mdio(0xfffffff7);
 
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
        ar71xx_eth0_data.phy_mask = 0x00000008;
+       ar71xx_eth0_data.reset_bit = RESET_MODULE_GE0_MAC |
+                                    RESET_MODULE_GE0_PHY;
        ar71xx_add_device_eth(0);
 
        ar71xx_add_device_usb();
 
-       ar71xx_pci_init(ARRAY_SIZE(wp543_pci_irqs), wp543_pci_irqs);
+       pb42_pci_init();
 
        ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio),
                                        wp543_leds_gpio);
@@ -141,4 +96,4 @@ static void __init wp543_setup(void)
                                        wp543_gpio_buttons);
 }
 
-MIPS_MACHINE(MACH_AR71XX_WP543, "Compex WP543", wp543_setup);
+MIPS_MACHINE(AR71XX_MACH_WP543, "WP543", "Compex WP543", wp543_setup);