+++ /dev/null
-/*
- * Atheros AP143 reference board support
- *
- * Copyright (c) 2013-2015 The Linux Foundation. All rights reserved.
- * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define AP143_GPIO_LED_WLAN 12
-#define AP143_GPIO_LED_WPS 13
-#define AP143_GPIO_LED_STATUS 13
-
-#define AP143_GPIO_LED_WAN 4
-#define AP143_GPIO_LED_LAN1 16
-#define AP143_GPIO_LED_LAN2 15
-#define AP143_GPIO_LED_LAN3 14
-#define AP143_GPIO_LED_LAN4 11
-
-#define AP143_GPIO_BTN_WPS 17
-
-#define AP143_KEYS_POLL_INTERVAL 20 /* msecs */
-#define AP143_KEYS_DEBOUNCE_INTERVAL (3 * AP143_KEYS_POLL_INTERVAL)
-
-#define AP143_MAC0_OFFSET 0
-#define AP143_MAC1_OFFSET 6
-#define AP143_WMAC_CALDATA_OFFSET 0x1000
-
-static struct gpio_led ap143_leds_gpio[] __initdata = {
- {
- .name = "ap143:green:status",
- .gpio = AP143_GPIO_LED_STATUS,
- .active_low = 1,
- },
- {
- .name = "ap143:green:wlan",
- .gpio = AP143_GPIO_LED_WLAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button ap143_gpio_keys[] __initdata = {
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = AP143_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP143_GPIO_BTN_WPS,
- .active_low = 1,
- },
-};
-
-static void __init ap143_gpio_led_setup(void)
-{
- ath79_gpio_direction_select(AP143_GPIO_LED_WAN, true);
- ath79_gpio_direction_select(AP143_GPIO_LED_LAN1, true);
- ath79_gpio_direction_select(AP143_GPIO_LED_LAN2, true);
- ath79_gpio_direction_select(AP143_GPIO_LED_LAN3, true);
- ath79_gpio_direction_select(AP143_GPIO_LED_LAN4, true);
-
- ath79_gpio_output_select(AP143_GPIO_LED_WAN,
- QCA953X_GPIO_OUT_MUX_LED_LINK5);
- ath79_gpio_output_select(AP143_GPIO_LED_LAN1,
- QCA953X_GPIO_OUT_MUX_LED_LINK1);
- ath79_gpio_output_select(AP143_GPIO_LED_LAN2,
- QCA953X_GPIO_OUT_MUX_LED_LINK2);
- ath79_gpio_output_select(AP143_GPIO_LED_LAN3,
- QCA953X_GPIO_OUT_MUX_LED_LINK3);
- ath79_gpio_output_select(AP143_GPIO_LED_LAN4,
- QCA953X_GPIO_OUT_MUX_LED_LINK4);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap143_leds_gpio),
- ap143_leds_gpio);
- ath79_register_gpio_keys_polled(-1, AP143_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap143_gpio_keys),
- ap143_gpio_keys);
-}
-
-static void __init ap143_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- ap143_gpio_led_setup();
-
- ath79_register_usb();
-
- ath79_wmac_set_led_pin(AP143_GPIO_LED_WLAN);
- ath79_register_wmac(art + AP143_WMAC_CALDATA_OFFSET, NULL);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_mdio(1, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art + AP143_MAC0_OFFSET, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, art + AP143_MAC1_OFFSET, 0);
-
- /* WAN port */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_register_eth(0);
-
- /* LAN ports */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_switch_data.phy4_mii_en = 1;
- ath79_register_eth(1);
-}
-
-MIPS_MACHINE(ATH79_MACH_AP143, "AP143", "Qualcomm Atheros AP143 reference board",
- ap143_setup);
projects / openwrt / openwrt.git / blobdiff