+++ /dev/null
-/*
- * TP-Link Archer C60 v1 board support
- *
- * Copyright (C) 2017 Henryk Heisig <hyniu@o2.pl>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <linux/gpio.h>
-
-#include "common.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-
-#define ARCHER_C60_V1_GPIO_LED_LAN 2
-#define ARCHER_C60_V1_GPIO_LED_POWER 16
-#define ARCHER_C60_V1_GPIO_LED_WLAN2 17
-#define ARCHER_C60_V1_GPIO_LED_WLAN5 18
-#define ARCHER_C60_V1_GPIO_LED_WPS 19
-#define ARCHER_C60_V1_GPIO_LED_WAN_GREEN 20
-#define ARCHER_C60_V1_GPIO_LED_WAN_AMBER 22
-
-
-#define ARCHER_C60_V1_KEYS_POLL_INTERVAL 20
-#define ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C60_V1_KEYS_POLL_INTERVAL)
-
-#define ARCHER_C60_V1_GPIO_BTN_RESET 21
-#define ARCHER_C60_V1_GPIO_BTN_RFKILL 1
-
-
-
-#define ARCHER_C60_V1_WMAC_CALDATA_OFFSET 0x1000
-#define ARCHER_C60_V1_PCI_CALDATA_OFFSET 0x5000
-
-static struct gpio_led archer_c60_v1_leds_gpio[] __initdata = {
- {
- .name = "archer-c60-v1:green:power",
- .gpio = ARCHER_C60_V1_GPIO_LED_POWER,
- .active_low = 1,
- },
- {
- .name = "archer-c60-v1:green:wlan2g",
- .gpio = ARCHER_C60_V1_GPIO_LED_WLAN2,
- .active_low = 1,
- },
- {
- .name = "archer-c60-v1:green:wlan5g",
- .gpio = ARCHER_C60_V1_GPIO_LED_WLAN5,
- .active_low = 1,
- },
- {
- .name = "archer-c60-v1:green:lan",
- .gpio = ARCHER_C60_V1_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "archer-c60-v1:green:wan",
- .gpio = ARCHER_C60_V1_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- },
- {
- .name = "archer-c60-v1:amber:wan",
- .gpio = ARCHER_C60_V1_GPIO_LED_WAN_AMBER,
- .active_low = 1,
- },
- {
- .name = "archer-c60-v1:green:wps",
- .gpio = ARCHER_C60_V1_GPIO_LED_WPS,
- .active_low = 1,
- },
-};
-
-static struct gpio_led archer_c60_v2_leds_gpio[] __initdata = {
- {
- .name = "archer-c60-v2:green:power",
- .gpio = ARCHER_C60_V1_GPIO_LED_POWER,
- .active_low = 1,
- },
- {
- .name = "archer-c60-v2:green:wlan2g",
- .gpio = ARCHER_C60_V1_GPIO_LED_WLAN2,
- .active_low = 1,
- },
- {
- .name = "archer-c60-v2:green:wlan5g",
- .gpio = ARCHER_C60_V1_GPIO_LED_WLAN5,
- .active_low = 1,
- },
- {
- .name = "archer-c60-v2:green:lan",
- .gpio = ARCHER_C60_V1_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "archer-c60-v2:green:wan",
- .gpio = ARCHER_C60_V1_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- },
- {
- .name = "archer-c60-v2:amber:wan",
- .gpio = ARCHER_C60_V1_GPIO_LED_WAN_AMBER,
- .active_low = 1,
- },
- {
- .name = "archer-c60-v2:green:wps",
- .gpio = ARCHER_C60_V1_GPIO_LED_WPS,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button archer_c60_v1_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ARCHER_C60_V1_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "RFKILL button",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ARCHER_C60_V1_GPIO_BTN_RFKILL,
- .active_low = 1,
- },
-};
-
-static void __init archer_c60_v1_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f010008);
- u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c60_v1_leds_gpio),
- archer_c60_v1_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, ARCHER_C60_V1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(archer_c60_v1_gpio_keys),
- archer_c60_v1_gpio_keys);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_mdio(1, 0x0);
-
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
-
- /* WAN port */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_register_eth(0);
-
- /* LAN ports */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_switch_data.phy4_mii_en = 1;
- ath79_register_eth(1);
-
- ath79_register_wmac(art + ARCHER_C60_V1_WMAC_CALDATA_OFFSET, mac);
- ap91_pci_init(art + ARCHER_C60_V1_PCI_CALDATA_OFFSET, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_ARCHER_C60_V1, "ARCHER-C60-V1",
- "TP-LINK Archer C60 v1", archer_c60_v1_setup);
-
-static void __init archer_c60_v2_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fb08);
- u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c60_v2_leds_gpio),
- archer_c60_v2_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, ARCHER_C60_V1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(archer_c60_v1_gpio_keys),
- archer_c60_v1_gpio_keys);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_mdio(1, 0x0);
-
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
-
- /* WAN port */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_register_eth(0);
-
- /* LAN ports */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_switch_data.phy4_mii_en = 1;
- ath79_register_eth(1);
-
- ath79_register_wmac(art + ARCHER_C60_V1_WMAC_CALDATA_OFFSET, mac);
- ap91_pci_init(art + ARCHER_C60_V1_PCI_CALDATA_OFFSET, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_ARCHER_C60_V2, "ARCHER-C60-V2",
- "TP-LINK Archer C60 v2", archer_c60_v2_setup);
projects / openwrt / openwrt.git / blobdiff