ar71xx: drop target

[openwrt/staging/dedeckeh.git] / target / linux / ar71xx / files / arch / mips / ath79 / mach-arduino-yun.c

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c
deleted file mode 100644 (file)
index 8ab07d5..0000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- *  Arduino Yun support
- *
- *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-#include <linux/gpio.h>
-#include "common.h"
-
-// Uncomment to have reset on gpio18 instead of gipo7
-#define DS2_B
-
-#define DS_GPIO_LED_WLAN               0
-#define DS_GPIO_LED_USB                        1
-
-#define DS_GPIO_OE                     21
-#define DS_GPIO_AVR_RESET              18
-
-// Maintained to have the console in the previous version of DS2 working
-#define DS_GPIO_AVR_RESET_DS2          7
-
-#define DS_GPIO_OE2                    22
-#define DS_GPIO_UART_ENA               23
-#define DS_GPIO_CONF_BTN               20
-
-#define DS_KEYS_POLL_INTERVAL          20      /* msecs */
-#define DS_KEYS_DEBOUNCE_INTERVAL      (3 * DS_KEYS_POLL_INTERVAL)
-
-#define DS_MAC0_OFFSET                 0x0000
-#define DS_MAC1_OFFSET                 0x0006
-#define DS_CALDATA_OFFSET              0x1000
-#define DS_WMAC_MAC_OFFSET             0x1002
-
-
-static struct gpio_led ds_leds_gpio[] __initdata = {
-       {
-               .name           = "arduino:white:usb",
-               .gpio           = DS_GPIO_LED_USB,
-               .active_low     = 0,
-       },
-       {
-               .name           = "arduino:blue:wlan",
-               .gpio           = DS_GPIO_LED_WLAN,
-               .active_low     = 0,
-       },
-};
-
-static struct gpio_keys_button ds_gpio_keys[] __initdata = {
-       {
-               .desc           = "configuration button",
-               .type           = EV_KEY,
-               .code           = KEY_WPS_BUTTON,
-               .debounce_interval = DS_KEYS_DEBOUNCE_INTERVAL,
-               .gpio           = DS_GPIO_CONF_BTN,
-               .active_low     = 1,
-       },
-};
-
-static void __init ds_common_setup(void)
-{
-       static u8 mac[6];
-
-       u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-       ath79_register_m25p80(NULL);
-
-       if (ar93xx_wmac_read_mac_address(mac)) {
-               ath79_register_wmac(NULL, NULL);
-       } else {
-               ath79_register_wmac(art + DS_CALDATA_OFFSET,
-                                   art + DS_WMAC_MAC_OFFSET);
-               memcpy(mac, art + DS_WMAC_MAC_OFFSET, sizeof(mac));
-       }
-
-       mac[3] |= 0x08;
-       ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-
-       mac[3] &= 0xF7;
-       ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
-       ath79_register_mdio(0, 0x0);
-
-       /* LAN ports */
-       ath79_register_eth(1);
-
-       /* WAN port */
-       ath79_register_eth(0);
-}
-
-static void __init ds_setup(void)
-{
-       u32 t;
-
-       ds_common_setup();
-
-       ath79_register_leds_gpio(-1, ARRAY_SIZE(ds_leds_gpio),
-                                ds_leds_gpio);
-       ath79_register_gpio_keys_polled(-1, DS_KEYS_POLL_INTERVAL,
-                                       ARRAY_SIZE(ds_gpio_keys),
-                                       ds_gpio_keys);
-       ath79_register_usb();
-
-       /* use the swtich_led directly form sysfs */
-       ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
-                                                               AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
-                                                               AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
-                                                               AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN);
-
-       //Disable the Function for some pins to have GPIO functionality active
-       // GPIO6-7-8 and GPIO11
-       ath79_gpio_function_setup(AR933X_GPIO_FUNC_JTAG_DISABLE | AR933X_GPIO_FUNC_I2S_MCK_EN, 0);
-
-       ath79_gpio_function2_setup(AR933X_GPIO_FUNC2_JUMPSTART_DISABLE, 0);
-
-       printk("Setting DogStick2 GPIO\n");
-
-       t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
-       t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
-       ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
-
-       // Put the avr reset to high 
-       if (gpio_request_one(DS_GPIO_AVR_RESET_DS2,
-           GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "OE-1") != 0)
-               printk("Error setting GPIO OE\n");
-       gpio_unexport(DS_GPIO_AVR_RESET_DS2);
-       gpio_free(DS_GPIO_AVR_RESET_DS2);
-
-       // enable OE of level shifter
-       if (gpio_request_one(DS_GPIO_OE,
-           GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "OE-1") != 0)
-               printk("Error setting GPIO OE\n");
-
-       if (gpio_request_one(DS_GPIO_UART_ENA,
-           GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "UART-ENA") != 0)
-               printk("Error setting GPIO Uart Enable\n");
-
-       // enable OE of level shifter
-       if (gpio_request_one(DS_GPIO_OE2,
-           GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "OE-2") != 0)
-               printk("Error setting GPIO OE2\n");
-}
-
-MIPS_MACHINE(ATH79_MACH_ARDUINO_YUN, "Yun", "Arduino Yun", ds_setup);