ar71xx: drop target

[openwrt/staging/chunkeey.git] / target / linux / ar71xx / files / arch / mips / ath79 / mach-ew-balin.c

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c
deleted file mode 100644 (file)
index 2e82ffd..0000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * EW Balin board support
- * (based on Atheros DB120 reference board support)
- *
- * Copyright (c) 2011 Qualcomm Atheros
- * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2017 Embedded Wireless GmbH    www.80211.de
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define BALIN_GPIO_LED_STATUS  14
-
-#define BALIN_GPIO_BTN_WPS             18
-
-#define BALIN_KEYS_POLL_INTERVAL       20      /* msecs */
-#define BALIN_KEYS_DEBOUNCE_INTERVAL   (3 * BALIN_KEYS_POLL_INTERVAL)
-
-#define BALIN_CALDATA_OFFSET           0x1000
-#define BALIN_WMAC_MAC_OFFSET          (BALIN_CALDATA_OFFSET + 0x02)
-
-static struct gpio_led balin_leds_gpio[] __initdata = {
-       {
-               .name           = "balin:green:status",
-               .gpio           = BALIN_GPIO_LED_STATUS,
-               .active_low     = 1,
-       },
-};
-
-static struct gpio_keys_button balin_gpio_keys[] __initdata = {
-       {
-               .desc           = "WPS button",
-               .type           = EV_KEY,
-               .code           = KEY_WPS_BUTTON,
-               .debounce_interval = BALIN_KEYS_DEBOUNCE_INTERVAL,
-               .gpio           = BALIN_GPIO_BTN_WPS,
-               .active_low     = 0,
-       },
-};
-
-
-static void __init balin_setup(void)
-{
-       u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-       static u8 mac[6];
-
-       ath79_register_m25p80(NULL);
-
-       ath79_register_leds_gpio(-1, ARRAY_SIZE(balin_leds_gpio),
-                                balin_leds_gpio);
-
-       ath79_register_gpio_keys_polled(-1, BALIN_KEYS_POLL_INTERVAL,
-                                       ARRAY_SIZE(balin_gpio_keys),
-                                       balin_gpio_keys);
-
-       ath79_register_usb();
-
-       ath79_register_wmac(art + BALIN_CALDATA_OFFSET, NULL);
-
-       ath79_register_pci();
-
-       ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
-                                  AR934X_ETH_CFG_SW_ONLY_MODE);
-
-       ath79_register_mdio(1, 0x0);
-
-       /* GMAC1 is connected to the internal switch */
-       memcpy(mac, art + BALIN_WMAC_MAC_OFFSET, sizeof(mac));
-       mac[3] |= 0x40;
-       ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
-       ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-       ath79_eth1_data.speed = SPEED_1000;
-       ath79_eth1_data.duplex = DUPLEX_FULL;
-
-       ath79_register_eth(1);
-}
-
-MIPS_MACHINE(ATH79_MACH_EW_BALIN, "EW-BALIN", "EmbWir-Balin",
-            balin_setup);