ar71xx: add support for jjPlus JWAP230

[openwrt/openwrt.git] / target / linux / ar71xx / files / arch / mips / ath79 / mach-jwap230.c

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c
new file mode 100644 (file)
index 0000000..f94e5b4
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c
@@ -0,0 +1,158 @@
+/*
+ * jjPlus JWAP230 board support
+ *
+ * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
+ *
+ * Based on mach-wpj558.c and mach-tl-wr1043nd-v2.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define JWAP230_GPIO_LED_LED1          23
+#define JWAP230_GPIO_LED_LED2          22
+#define JWAP230_GPIO_LED_LED3          21
+
+#define JWAP230_MAC0_OFFSET            0x0
+#define JWAP230_MAC1_OFFSET            0x6
+#define JWAP230_WMAC_CALDATA_OFFSET    0x1000
+
+static struct gpio_led jwap230_leds_gpio[] __initdata = {
+       {
+               .name           = "jwap230:green:led1",
+               .gpio           = JWAP230_GPIO_LED_LED1,
+               .active_low     = 1,
+       },
+       {
+               .name           = "jwap230:green:led2",
+               .gpio           = JWAP230_GPIO_LED_LED2,
+               .active_low     = 1,
+       },
+       {
+               .name           = "jwap230:green:led3",
+               .gpio           = JWAP230_GPIO_LED_LED3,
+               .active_low     = 1,
+       }
+};
+
+static const struct ar8327_led_info jwap230_leds_qca8337[] = {
+       AR8327_LED_INFO(PHY0_0, HW, "jwap230:green:lan"),
+       AR8327_LED_INFO(PHY4_0, HW, "jwap230:green:wan"),
+};
+
+/* Blink rate: 1 Gbps -> 8 hz, 100 Mbs -> 4 Hz, 10 Mbps -> 2 Hz */
+static struct ar8327_led_cfg jwap230_qca8337_led_cfg = {
+       .led_ctrl0 = 0xcf37cf37,
+       .led_ctrl1 = 0xcf37cf37,
+       .led_ctrl2 = 0xcf37cf37,
+       .led_ctrl3 = 0x0,
+       .open_drain = true,
+};
+
+/* QCA8337 GMAC0 is connected with QCA9558 over RGMII */
+static struct ar8327_pad_cfg jwap230_qca8337_pad0_cfg = {
+       .mode = AR8327_PAD_MAC_RGMII,
+       .txclk_delay_en = true,
+       .rxclk_delay_en = true,
+       .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+       .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+       .mac06_exchange_dis = true,
+};
+
+/* QCA8337 GMAC6 is connected with QCA9558 over SGMII */
+static struct ar8327_pad_cfg jwap230_qca8337_pad6_cfg = {
+       .mode = AR8327_PAD_MAC_SGMII,
+       .sgmii_delay_en = true,
+       .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
+};
+
+static struct ar8327_platform_data jwap230_qca8337_data = {
+       .pad0_cfg = &jwap230_qca8337_pad0_cfg,
+       .pad6_cfg = &jwap230_qca8337_pad6_cfg,
+       .port0_cfg = {
+               .force_link = 1,
+               .speed = AR8327_PORT_SPEED_1000,
+               .duplex = 1,
+               .txpause = 1,
+               .rxpause = 1,
+       },
+       .port6_cfg = {
+               .force_link = 1,
+               .speed = AR8327_PORT_SPEED_1000,
+               .duplex = 1,
+               .txpause = 1,
+               .rxpause = 1,
+       },
+       .led_cfg = &jwap230_qca8337_led_cfg,
+       .num_leds = ARRAY_SIZE(jwap230_leds_qca8337),
+       .leds = jwap230_leds_qca8337,
+};
+
+static struct mdio_board_info jwap230_mdio0_info[] = {
+       {
+               .bus_id = "ag71xx-mdio.0",
+               .phy_addr = 0,
+               .platform_data = &jwap230_qca8337_data,
+       },
+};
+
+static void __init jwap230_setup(void)
+{
+       u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+       ath79_register_m25p80(NULL);
+
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(jwap230_leds_gpio),
+                                jwap230_leds_gpio);
+
+       mdiobus_register_board_info(jwap230_mdio0_info,
+                                   ARRAY_SIZE(jwap230_mdio0_info));
+       ath79_register_mdio(0, 0x0);
+
+       ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
+
+       /* QCA9558 GMAC0 is connected to RMGII interface */
+       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+       ath79_eth0_data.phy_mask = BIT(0);
+       ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+       ath79_eth0_pll_data.pll_1000 = 0xa6000000;
+
+       ath79_init_mac(ath79_eth0_data.mac_addr, art + JWAP230_MAC0_OFFSET, 0);
+       ath79_register_eth(0);
+
+       /* QCA9558 GMAC1 is connected to SGMII interface */
+       ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+       ath79_eth1_data.speed = SPEED_1000;
+       ath79_eth1_data.duplex = DUPLEX_FULL;
+       ath79_eth1_pll_data.pll_1000 = 0x03000101;
+
+       ath79_init_mac(ath79_eth1_data.mac_addr, art + JWAP230_MAC1_OFFSET, 0);
+       ath79_register_eth(1);
+
+       ath79_register_wmac(art + JWAP230_WMAC_CALDATA_OFFSET, NULL);
+
+       ath79_register_pci();
+       ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_JWAP230, "JWAP230", "jjPlus JWAP230", jwap230_setup);