ar71xx: drop target
[openwrt/openwrt.git] / target / linux / ar71xx / files / arch / mips / ath79 / mach-rb750.c
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb750.c
deleted file mode 100644 (file)
index 0ec94a8..0000000
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
- *  MikroTik RouterBOARD 750/750GL support
- *
- *  Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/export.h>
-#include <linux/pci.h>
-#include <linux/ath9k_platform.h>
-#include <linux/platform_device.h>
-#include <linux/phy.h>
-#include <linux/ar8216_platform.h>
-#include <linux/rle.h>
-#include <linux/routerboot.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/irq.h>
-#include <asm/mach-ath79/mach-rb750.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-usb.h"
-#include "dev-eth.h"
-#include "machtypes.h"
-#include "routerboot.h"
-
-static struct rb750_led_data rb750_leds[] = {
-       {
-               .name           = "rb750:green:act",
-               .mask           = RB750_LED_ACT,
-               .active_low     = 1,
-       }, {
-               .name           = "rb750:green:port1",
-               .mask           = RB750_LED_PORT5,
-               .active_low     = 1,
-       }, {
-               .name           = "rb750:green:port2",
-               .mask           = RB750_LED_PORT4,
-               .active_low     = 1,
-       }, {
-               .name           = "rb750:green:port3",
-               .mask           = RB750_LED_PORT3,
-               .active_low     = 1,
-       }, {
-               .name           = "rb750:green:port4",
-               .mask           = RB750_LED_PORT2,
-               .active_low     = 1,
-       }, {
-               .name           = "rb750:green:port5",
-               .mask           = RB750_LED_PORT1,
-               .active_low     = 1,
-       }
-};
-
-static struct rb750_led_data rb750gr3_leds[] = {
-       {
-               .name           = "rb750:green:act",
-               .mask           = RB7XX_LED_ACT,
-               .active_low     = 1,
-       },
-};
-
-static struct rb750_led_platform_data rb750_leds_data;
-static struct platform_device rb750_leds_device = {
-       .name   = "leds-rb750",
-       .dev    = {
-               .platform_data = &rb750_leds_data,
-       }
-};
-
-static struct rb7xx_nand_platform_data rb750_nand_data;
-static struct platform_device rb750_nand_device = {
-       .name   = "rb750-nand",
-       .id     = -1,
-       .dev    = {
-               .platform_data = &rb750_nand_data,
-       }
-};
-
-static void rb750_latch_change(u32 mask_clr, u32 mask_set)
-{
-       static DEFINE_SPINLOCK(lock);
-       static u32 latch_set = RB750_LED_BITS | RB750_LVC573_LE;
-       static u32 latch_oe;
-       static u32 latch_clr;
-       unsigned long flags;
-       u32 t;
-
-       spin_lock_irqsave(&lock, flags);
-
-       if ((mask_clr & BIT(31)) != 0 &&
-           (latch_set & RB750_LVC573_LE) == 0) {
-               goto unlock;
-       }
-
-       latch_set = (latch_set | mask_set) & ~mask_clr;
-       latch_clr = (latch_clr | mask_clr) & ~mask_set;
-
-       if (latch_oe == 0)
-               latch_oe = __raw_readl(ath79_gpio_base + AR71XX_GPIO_REG_OE);
-
-       if (likely(latch_set & RB750_LVC573_LE)) {
-               void __iomem *base = ath79_gpio_base;
-
-               t = __raw_readl(base + AR71XX_GPIO_REG_OE);
-               t |= mask_clr | latch_oe | mask_set;
-
-               __raw_writel(t, base + AR71XX_GPIO_REG_OE);
-               __raw_writel(latch_clr, base + AR71XX_GPIO_REG_CLEAR);
-               __raw_writel(latch_set, base + AR71XX_GPIO_REG_SET);
-       } else if (mask_clr & RB750_LVC573_LE) {
-               void __iomem *base = ath79_gpio_base;
-
-               latch_oe = __raw_readl(base + AR71XX_GPIO_REG_OE);
-               __raw_writel(RB750_LVC573_LE, base + AR71XX_GPIO_REG_CLEAR);
-               /* flush write */
-               __raw_readl(base + AR71XX_GPIO_REG_CLEAR);
-       }
-
-unlock:
-       spin_unlock_irqrestore(&lock, flags);
-}
-
-static void rb750_nand_enable_pins(void)
-{
-       rb750_latch_change(RB750_LVC573_LE, 0);
-       ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
-                                 AR724X_GPIO_FUNC_SPI_EN);
-}
-
-static void rb750_nand_disable_pins(void)
-{
-       ath79_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN,
-                                 AR724X_GPIO_FUNC_JTAG_DISABLE);
-       rb750_latch_change(0, RB750_LVC573_LE);
-}
-
-static void __init rb750_setup(void)
-{
-       ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
-                                    AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
-                                    AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
-                                    AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
-                                    AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
-       ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
-       ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
-
-       ath79_register_mdio(0, 0x0);
-
-       /* LAN ports */
-       ath79_register_eth(1);
-
-       /* WAN port */
-       ath79_register_eth(0);
-
-       rb750_leds_data.num_leds = ARRAY_SIZE(rb750_leds);
-       rb750_leds_data.leds = rb750_leds;
-       rb750_leds_data.latch_change = rb750_latch_change;
-       platform_device_register(&rb750_leds_device);
-
-       rb750_nand_data.nce_line = RB750_NAND_NCE;
-       rb750_nand_data.enable_pins = rb750_nand_enable_pins;
-       rb750_nand_data.disable_pins = rb750_nand_disable_pins;
-       rb750_nand_data.latch_change = rb750_latch_change;
-       platform_device_register(&rb750_nand_device);
-
-       /* USB */
-       ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_750, "750i", "MikroTik RouterBOARD 750",
-            rb750_setup);
-
-static struct ar8327_pad_cfg rb750gr3_ar8327_pad0_cfg = {
-       .mode = AR8327_PAD_MAC_RGMII,
-       .txclk_delay_en = true,
-       .rxclk_delay_en = true,
-       .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
-       .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_platform_data rb750gr3_ar8327_data = {
-       .pad0_cfg = &rb750gr3_ar8327_pad0_cfg,
-       .port0_cfg = {
-               .force_link = 1,
-               .speed = AR8327_PORT_SPEED_1000,
-               .duplex = 1,
-               .txpause = 1,
-               .rxpause = 1,
-       }
-};
-
-static struct mdio_board_info rb750g3_mdio_info[] = {
-       {
-               .bus_id = "ag71xx-mdio.0",
-               .mdio_addr = 0,
-               .platform_data = &rb750gr3_ar8327_data,
-       },
-};
-
-static void rb750gr3_nand_enable_pins(void)
-{
-       ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
-                                 AR724X_GPIO_FUNC_SPI_EN |
-                                 AR724X_GPIO_FUNC_SPI_CS_EN2);
-}
-
-static void rb750gr3_nand_disable_pins(void)
-{
-       ath79_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN |
-                                 AR724X_GPIO_FUNC_SPI_CS_EN2,
-                                 AR724X_GPIO_FUNC_JTAG_DISABLE);
-}
-
-static void rb750gr3_latch_change(u32 mask_clr, u32 mask_set)
-{
-       static DEFINE_SPINLOCK(lock);
-       static u32 latch_set = RB7XX_LED_ACT;
-       static u32 latch_clr;
-       void __iomem *base = ath79_gpio_base;
-       unsigned long flags;
-       u32 t;
-
-       spin_lock_irqsave(&lock, flags);
-
-       latch_set = (latch_set | mask_set) & ~mask_clr;
-       latch_clr = (latch_clr | mask_clr) & ~mask_set;
-
-       mask_set = latch_set & (RB7XX_USB_POWERON | RB7XX_MONITOR);
-       mask_clr = latch_clr & (RB7XX_USB_POWERON | RB7XX_MONITOR);
-
-       if ((latch_set ^ RB7XX_LED_ACT) & RB7XX_LED_ACT) {
-               /* enable output mode */
-               t = __raw_readl(base + AR71XX_GPIO_REG_OE);
-               t |= RB7XX_LED_ACT;
-               __raw_writel(t, base + AR71XX_GPIO_REG_OE);
-
-               mask_clr |= RB7XX_LED_ACT;
-       } else {
-               /* disable output mode */
-               t = __raw_readl(base + AR71XX_GPIO_REG_OE);
-               t &= ~RB7XX_LED_ACT;
-               __raw_writel(t, base + AR71XX_GPIO_REG_OE);
-       }
-
-       __raw_writel(mask_set, base + AR71XX_GPIO_REG_SET);
-       __raw_writel(mask_clr, base + AR71XX_GPIO_REG_CLEAR);
-
-       spin_unlock_irqrestore(&lock, flags);
-}
-
-static void __init rb750gr3_setup(void)
-{
-       ath79_register_mdio(0, 0x0);
-       mdiobus_register_board_info(rb750g3_mdio_info,
-                                   ARRAY_SIZE(rb750g3_mdio_info));
-
-       ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
-       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-       ath79_eth0_data.phy_mask = BIT(0);
-       ath79_eth0_pll_data.pll_1000 = 0x62000000;
-
-       ath79_register_eth(0);
-
-       rb750_leds_data.num_leds = ARRAY_SIZE(rb750gr3_leds);
-       rb750_leds_data.leds = rb750gr3_leds;
-       rb750_leds_data.latch_change = rb750gr3_latch_change;
-       platform_device_register(&rb750_leds_device);
-
-       rb750_nand_data.nce_line = RB7XX_NAND_NCE;
-       rb750_nand_data.enable_pins = rb750gr3_nand_enable_pins;
-       rb750_nand_data.disable_pins = rb750gr3_nand_disable_pins;
-       rb750_nand_data.latch_change = rb750gr3_latch_change;
-       platform_device_register(&rb750_nand_device);
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_750G_R3, "750Gr3", "MikroTik RouterBOARD 750GL",
-            rb750gr3_setup);
-
-#define RB751_HARDCONFIG       0x1f00b000
-#define RB751_HARDCONFIG_SIZE  0x1000
-
-static void __init rb751_wlan_setup(void)
-{
-       u8 *hardconfig = (u8 *) KSEG1ADDR(RB751_HARDCONFIG);
-       struct ath9k_platform_data *wmac_data;
-       u16 tag_len;
-       u8 *tag;
-       u16 mac_len;
-       u8 *mac;
-       int err;
-
-       wmac_data = ap9x_pci_get_wmac_data(0);
-       if (!wmac_data) {
-               pr_err("rb75x: unable to get address of wlan data\n");
-               return;
-       }
-
-       ap9x_pci_setup_wmac_led_pin(0, 9);
-
-       err = routerboot_find_tag(hardconfig, RB751_HARDCONFIG_SIZE,
-                                 RB_ID_WLAN_DATA, &tag, &tag_len);
-       if (err) {
-               pr_err("rb75x: no calibration data found\n");
-               return;
-       }
-
-       err = rle_decode(tag, tag_len, (unsigned char *) wmac_data->eeprom_data,
-                        sizeof(wmac_data->eeprom_data), NULL, NULL);
-       if (err) {
-               pr_err("rb75x: unable to decode wlan eeprom data\n");
-               return;
-       }
-
-       err = routerboot_find_tag(hardconfig, RB751_HARDCONFIG_SIZE,
-                                 RB_ID_MAC_ADDRESS_PACK, &mac, &mac_len);
-       if (err) {
-               pr_err("rb75x: no mac address found\n");
-               return;
-       }
-
-       ap91_pci_init(NULL, mac);
-}
-
-static void __init rb751_setup(void)
-{
-       rb750_setup();
-       ath79_register_usb();
-       rb751_wlan_setup();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_751, "751", "MikroTik RouterBOARD 751",
-            rb751_setup);
-
-static void __init rb751g_setup(void)
-{
-       rb750gr3_setup();
-       ath79_register_usb();
-       rb751_wlan_setup();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_751G, "751g", "MikroTik RouterBOARD 751G",
-            rb751g_setup);