/*
* NAND flash driver for the MikroTik RouterBOARD 750
*
- * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
-#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/io.h>
#include <linux/slab.h>
-#include <asm/mach-ar71xx/ar71xx.h>
-#include <asm/mach-ar71xx/mach-rb750.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/mach-rb750.h>
#define DRV_NAME "rb750-nand"
#define DRV_VERSION "0.1.0"
static void rb750_nand_write(const u8 *buf, unsigned len)
{
- void __iomem *base = ar71xx_gpio_base;
+ void __iomem *base = ath79_gpio_base;
u32 out;
+ u32 t;
unsigned i;
/* set data lines to output mode */
- __raw_writel(__raw_readl(base + GPIO_REG_OE) | RB750_NAND_DATA_BITS,
- base + GPIO_REG_OE);
+ t = __raw_readl(base + AR71XX_GPIO_REG_OE);
+ __raw_writel(t | RB750_NAND_DATA_BITS, base + AR71XX_GPIO_REG_OE);
- out = __raw_readl(base + GPIO_REG_OUT);
+ out = __raw_readl(base + AR71XX_GPIO_REG_OUT);
out &= ~(RB750_NAND_DATA_BITS | RB750_NAND_NWE);
for (i = 0; i != len; i++) {
u32 data;
data = buf[i];
data <<= RB750_NAND_DATA_SHIFT;
data |= out;
- __raw_writel(data, base + GPIO_REG_OUT);
+ __raw_writel(data, base + AR71XX_GPIO_REG_OUT);
- __raw_writel(data | RB750_NAND_NWE, base + GPIO_REG_OUT);
+ __raw_writel(data | RB750_NAND_NWE, base + AR71XX_GPIO_REG_OUT);
/* flush write */
- __raw_readl(base + GPIO_REG_OUT);
+ __raw_readl(base + AR71XX_GPIO_REG_OUT);
}
/* set data lines to input mode */
- __raw_writel(__raw_readl(base + GPIO_REG_OE) & ~RB750_NAND_DATA_BITS,
- base + GPIO_REG_OE);
+ t = __raw_readl(base + AR71XX_GPIO_REG_OE);
+ __raw_writel(t & ~RB750_NAND_DATA_BITS, base + AR71XX_GPIO_REG_OE);
/* flush write */
- __raw_readl(base + GPIO_REG_OE);
+ __raw_readl(base + AR71XX_GPIO_REG_OE);
}
static int rb750_nand_read_verify(u8 *read_buf, unsigned len,
const u8 *verify_buf)
{
- void __iomem *base = ar71xx_gpio_base;
+ void __iomem *base = ath79_gpio_base;
unsigned i;
for (i = 0; i < len; i++) {
u8 data;
/* activate RE line */
- __raw_writel(RB750_NAND_NRE, base + GPIO_REG_CLEAR);
+ __raw_writel(RB750_NAND_NRE, base + AR71XX_GPIO_REG_CLEAR);
/* flush write */
- __raw_readl(base + GPIO_REG_CLEAR);
+ __raw_readl(base + AR71XX_GPIO_REG_CLEAR);
/* read input lines */
- data = __raw_readl(base + GPIO_REG_IN) >> RB750_NAND_DATA_SHIFT;
+ data = __raw_readl(base + AR71XX_GPIO_REG_IN) >>
+ RB750_NAND_DATA_SHIFT;
/* deactivate RE line */
- __raw_writel(RB750_NAND_NRE, base + GPIO_REG_SET);
+ __raw_writel(RB750_NAND_NRE, base + AR71XX_GPIO_REG_SET);
if (read_buf)
read_buf[i] = data;
static void rb750_nand_select_chip(struct mtd_info *mtd, int chip)
{
- void __iomem *base = ar71xx_gpio_base;
+ void __iomem *base = ath79_gpio_base;
u32 func;
+ u32 t;
- func = __raw_readl(base + GPIO_REG_FUNC);
+ func = __raw_readl(base + AR71XX_GPIO_REG_FUNC);
if (chip >= 0) {
/* disable latch */
rb750_latch_change(RB750_LVC573_LE, 0);
- /* disable alternate functions */
- ar71xx_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
- AR724X_GPIO_FUNC_SPI_EN);
+ rb750_nand_pins_enable();
/* set input mode for data lines */
- __raw_writel(__raw_readl(base + GPIO_REG_OE) &
- ~RB750_NAND_INPUT_BITS,
- base + GPIO_REG_OE);
+ t = __raw_readl(base + AR71XX_GPIO_REG_OE);
+ __raw_writel(t & ~RB750_NAND_INPUT_BITS,
+ base + AR71XX_GPIO_REG_OE);
/* deactivate RE and WE lines */
__raw_writel(RB750_NAND_NRE | RB750_NAND_NWE,
- base + GPIO_REG_SET);
+ base + AR71XX_GPIO_REG_SET);
/* flush write */
- (void) __raw_readl(base + GPIO_REG_SET);
+ (void) __raw_readl(base + AR71XX_GPIO_REG_SET);
/* activate CE line */
- __raw_writel(RB750_NAND_NCE, base + GPIO_REG_CLEAR);
+ __raw_writel(RB750_NAND_NCE, base + AR71XX_GPIO_REG_CLEAR);
} else {
/* deactivate CE line */
- __raw_writel(RB750_NAND_NCE, base + GPIO_REG_SET);
+ __raw_writel(RB750_NAND_NCE, base + AR71XX_GPIO_REG_SET);
/* flush write */
- (void) __raw_readl(base + GPIO_REG_SET);
+ (void) __raw_readl(base + AR71XX_GPIO_REG_SET);
- __raw_writel(__raw_readl(base + GPIO_REG_OE) |
- RB750_NAND_IO0 | RB750_NAND_RDY,
- base + GPIO_REG_OE);
+ t = __raw_readl(base + AR71XX_GPIO_REG_OE);
+ __raw_writel(t | RB750_NAND_IO0 | RB750_NAND_RDY,
+ base + AR71XX_GPIO_REG_OE);
- /* restore alternate functions */
- ar71xx_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN,
- AR724X_GPIO_FUNC_JTAG_DISABLE);
+ rb750_nand_pins_disable();
/* enable latch */
rb750_latch_change(0, RB750_LVC573_LE);
static int rb750_nand_dev_ready(struct mtd_info *mtd)
{
- void __iomem *base = ar71xx_gpio_base;
+ void __iomem *base = ath79_gpio_base;
- return !!(__raw_readl(base + GPIO_REG_IN) & RB750_NAND_RDY);
+ return !!(__raw_readl(base + AR71XX_GPIO_REG_IN) & RB750_NAND_RDY);
}
static void rb750_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
if (ctrl & NAND_CTRL_CHANGE) {
- void __iomem *base = ar71xx_gpio_base;
+ void __iomem *base = ath79_gpio_base;
u32 t;
- t = __raw_readl(base + GPIO_REG_OUT);
+ t = __raw_readl(base + AR71XX_GPIO_REG_OUT);
t &= ~(RB750_NAND_CLE | RB750_NAND_ALE);
t |= (ctrl & NAND_CLE) ? RB750_NAND_CLE : 0;
t |= (ctrl & NAND_ALE) ? RB750_NAND_ALE : 0;
- __raw_writel(t, base + GPIO_REG_OUT);
+ __raw_writel(t, base + AR71XX_GPIO_REG_OUT);
/* flush write */
- __raw_readl(base + GPIO_REG_OUT);
+ __raw_readl(base + AR71XX_GPIO_REG_OUT);
}
if (cmd != NAND_CMD_NONE) {
static void __init rb750_nand_gpio_init(void)
{
- void __iomem *base = ar71xx_gpio_base;
+ void __iomem *base = ath79_gpio_base;
u32 out;
+ u32 t;
- out = __raw_readl(base + GPIO_REG_OUT);
+ out = __raw_readl(base + AR71XX_GPIO_REG_OUT);
/* setup output levels */
__raw_writel(RB750_NAND_NCE | RB750_NAND_NRE | RB750_NAND_NWE,
- base + GPIO_REG_SET);
+ base + AR71XX_GPIO_REG_SET);
__raw_writel(RB750_NAND_ALE | RB750_NAND_CLE,
- base + GPIO_REG_CLEAR);
+ base + AR71XX_GPIO_REG_CLEAR);
/* setup input lines */
- __raw_writel(__raw_readl(base + GPIO_REG_OE) & ~(RB750_NAND_INPUT_BITS),
- base + GPIO_REG_OE);
+ t = __raw_readl(base + AR71XX_GPIO_REG_OE);
+ __raw_writel(t & ~(RB750_NAND_INPUT_BITS), base + AR71XX_GPIO_REG_OE);
/* setup output lines */
- __raw_writel(__raw_readl(base + GPIO_REG_OE) | RB750_NAND_OUTPUT_BITS,
- base + GPIO_REG_OE);
+ t = __raw_readl(base + AR71XX_GPIO_REG_OE);
+ __raw_writel(t | RB750_NAND_OUTPUT_BITS, base + AR71XX_GPIO_REG_OE);
rb750_latch_change(~out & RB750_NAND_IO0, out & RB750_NAND_IO0);
}
-static int __init rb750_nand_probe(struct platform_device *pdev)
+static int __devinit rb750_nand_probe(struct platform_device *pdev)
{
struct rb750_nand_info *info;
int ret;
platform_set_drvdata(pdev, info);
- ret = nand_scan_ident(&info->mtd, 1);
+ ret = nand_scan_ident(&info->mtd, 1, NULL);
if (ret) {
ret = -ENXIO;
goto err_free_info;
goto err_set_drvdata;
}
-#ifdef CONFIG_MTD_PARTITIONS
- ret = add_mtd_partitions(&info->mtd, rb750_nand_partitions,
+ ret = mtd_device_register(&info->mtd, rb750_nand_partitions,
ARRAY_SIZE(rb750_nand_partitions));
-#else
- ret = add_mtd_device(&info->mtd);
-#endif
if (ret)
goto err_release_nand;
return 0;
- err_release_nand:
+err_release_nand:
nand_release(&info->mtd);
- err_set_drvdata:
+err_set_drvdata:
platform_set_drvdata(pdev, NULL);
- err_free_info:
+err_free_info:
kfree(info);
return ret;
}
projects / openwrt / staging / wigyori.git / blobdiff