ar71xx: nuke 2.6.39 support

[openwrt/svn-archive/archive.git] / target / linux / ar71xx / files-2.6.39 / arch / mips / ar71xx / mach-ap113.c

diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap113.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap113.c
deleted file mode 100644 (file)
index 2ece398..0000000
--- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap113.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- *  Atheros AP113 board support
- *
- *  Copyright (C) 2011 Florian Fainelli <florian@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/spi/flash.h>
-
-#include "machtype.h"
-#include "devices.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-pb9x-pci.h"
-#include "dev-usb.h"
-
-#define AP113_GPIO_LED_USB             0
-#define AP113_GPIO_LED_STATUS          1
-#define AP113_GPIO_LED_ST              11
-
-#define AP113_GPIO_BTN_JUMPSTART       12
-
-#define AP113_KEYS_POLL_INTERVAL       20      /* msecs */
-#define AP113_KEYS_DEBOUNCE_INTERVAL   (3 * AP113_KEYS_POLL_INTERVAL)
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition ap113_parts[] = {
-       {
-               .name           = "u-boot",
-               .offset         = 0,
-               .size           = 0x010000,
-               .mask_flags     = MTD_WRITEABLE,
-       },
-       {
-               .name           = "rootfs",
-               .offset         = 0x010000,
-               .size           = 0x300000,
-       },
-       {
-               .name           = "uImage",
-               .offset         = 0x300000,
-               .size           = 0x3e0000,
-       },
-       {
-               .name           = "NVRAM",
-               .offset         = 0x3e0000,
-               .size           = 0x010000,
-       },
-       {
-               .name           = "ART",
-               .offset         = 0x3f0000,
-               .size           = 0x010000,
-               .mask_flags     = MTD_WRITEABLE,
-       },
-};
-#define ap113_nr_parts         ARRAY_SIZE(ap113_parts)
-#else
-#define ap113_parts            NULL
-#define ap113_nr_parts         0
-#endif /* CONFIG_MTD_PARTITIONS */
-
-static struct flash_platform_data ap113_flash_data = {
-       .parts          = ap113_parts,
-       .nr_parts       = ap113_nr_parts,
-};
-
-static struct gpio_led ap113_leds_gpio[] __initdata = {
-       {
-               .name           = "ap113:green:usb",
-               .gpio           = AP113_GPIO_LED_USB,
-               .active_low     = 1,
-       },
-       {
-               .name           = "ap113:green:status",
-               .gpio           = AP113_GPIO_LED_STATUS,
-               .active_low     = 1,
-       },
-       {
-               .name           = "ap113:green:st",
-               .gpio           = AP113_GPIO_LED_ST,
-               .active_low     = 1,
-       }
-};
-
-static struct gpio_keys_button ap113_gpio_keys[] __initdata = {
-       {
-               .desc           = "jumpstart button",
-               .type           = EV_KEY,
-               .code           = KEY_WPS_BUTTON,
-               .debounce_interval = AP113_KEYS_DEBOUNCE_INTERVAL,
-               .gpio           = AP113_GPIO_BTN_JUMPSTART,
-               .active_low     = 1,
-       },
-};
-
-static void __init ap113_setup(void)
-{
-       u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
-
-       ar71xx_add_device_m25p80(&ap113_flash_data);
-
-       ar71xx_add_device_mdio(0, ~BIT(0));
-       ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
-       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-       ar71xx_eth0_data.speed = SPEED_1000;
-       ar71xx_eth0_data.duplex = DUPLEX_FULL;
-       ar71xx_eth0_data.phy_mask = BIT(0);
-
-       ar71xx_add_device_eth(0);
-
-       ar71xx_register_gpio_keys_polled(-1, AP113_KEYS_POLL_INTERVAL,
-                                        ARRAY_SIZE(ap113_gpio_keys),
-                                        ap113_gpio_keys);
-       ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap113_leds_gpio),
-                                       ap113_leds_gpio);
-
-       ar71xx_add_device_usb();
-
-       pb9x_pci_init();
-}
-
-MIPS_MACHINE(AR71XX_MACH_AP113, "AP113", "Atheros AP113",
-            ap113_setup);