+++ /dev/null
-/*
- * Atheros DB120 board (WASP SoC) support
- *
- * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ar71xx/ar71xx.h>
-
-#include "machtype.h"
-#include "devices.h"
-#include "dev-m25p80.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-usb.h"
-#include "dev-ar9xxx-wmac.h"
-#include "dev-db120-pci.h"
-
-#define DB120_GPIO_LED_USB 11
-#define DB120_GPIO_LED_WLAN_5G 12
-#define DB120_GPIO_LED_WLAN_2G 13
-#define DB120_GPIO_LED_STATUS 14
-#define DB120_GPIO_LED_WPS 15
-
-#define DB120_GPIO_BTN_WPS 16
-
-#define DB120_MAC0_OFFSET 0
-#define DB120_MAC1_OFFSET 6
-#define DB120_WMAC_CALDATA_OFFSET 0x1000
-#define DB120_PCIE_CALDATA_OFFSET 0x5000
-
-#define DB120_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL)
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition db120_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "u-boot-env",
- .offset = 0x040000,
- .size = 0x010000,
- }, {
- .name = "rootfs",
- .offset = 0x050000,
- .size = 0x630000,
- }, {
- .name = "uImage",
- .offset = 0x680000,
- .size = 0x160000,
- }, {
- .name = "NVRAM",
- .offset = 0x7E0000,
- .size = 0x010000,
- }, {
- .name = "ART",
- .offset = 0x7F0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }
-};
-#endif /* CONFIG_MTD_PARTITIONS */
-
-static struct flash_platform_data db120_flash_data = {
-#ifdef CONFIG_MTD_PARTITIONS
- .parts = db120_partitions,
- .nr_parts = ARRAY_SIZE(db120_partitions),
-#endif
-};
-
-static struct gpio_led db120_leds_gpio[] __initdata = {
- {
- .name = "db120:green:status",
- .gpio = DB120_GPIO_LED_STATUS,
- .active_low = 1,
- }, {
- .name = "db120:green:wps",
- .gpio = DB120_GPIO_LED_WPS,
- .active_low = 1,
- }, {
- .name = "db120:green:wlan-5g",
- .gpio = DB120_GPIO_LED_WLAN_5G,
- .active_low = 1,
- }, {
- .name = "db120:green:wlan-2g",
- .gpio = DB120_GPIO_LED_WLAN_2G,
- .active_low = 1,
- }, {
- .name = "db120:green:usb",
- .gpio = DB120_GPIO_LED_USB,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button db120_gpio_keys[] __initdata = {
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DB120_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static void __init db120_gmac_setup(void)
-{
- void __iomem *base;
- u32 t;
-
- base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
-
- t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
- t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 |
- AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE);
- __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
-
- iounmap(base);
-}
-
-static void __init db120_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ar71xx_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO);
-
- ar71xx_add_device_usb();
-
- ar71xx_add_device_m25p80(&db120_flash_data);
-
- ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
- db120_leds_gpio);
-
- ar71xx_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(db120_gpio_keys),
- db120_gpio_keys);
-
- db120_gmac_setup();
-
- ar71xx_add_device_mdio(0, 0x0);
- ar71xx_add_device_mdio(1, 0x0);
-
- ar71xx_init_mac(ar71xx_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0);
-#if 0
- /* GMAC0 is connected to an AR8327 switch */
- ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ar71xx_eth0_data.speed = SPEED_1000;
- ar71xx_eth0_data.duplex = DUPLEX_FULL;
-#else
- /* GMAC0 is connected to PHY4 of the internal switch */
- ar71xx_switch_data.phy4_mii_en = 1;
-
- ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ar71xx_eth0_data.phy_mask = BIT(4);
- ar71xx_eth0_data.mii_bus_dev = &ar71xx_mdio1_device.dev;
-#endif
-
- ar71xx_add_device_eth(0);
-
- /* GMAC1 is connected to the internal switch */
- ar71xx_init_mac(ar71xx_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0);
- ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ar71xx_eth1_data.speed = SPEED_1000;
- ar71xx_eth1_data.duplex = DUPLEX_FULL;
-
- ar71xx_add_device_eth(1);
-
- ar9xxx_add_device_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
-
- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL);
-}
-
-MIPS_MACHINE(AR71XX_MACH_DB120, "DB120", "Atheros DB120", db120_setup);
projects / openwrt / svn-archive / archive.git / blobdiff