+++ /dev/null
-/*
- * Buffalo WHR-HP-G300N board support
- *
- * based on ...
- *
- * TP-LINK TL-WR741ND board support
- *
- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ar71xx/ar71xx.h>
-
-#include "machtype.h"
-#include "devices.h"
-#include "dev-m25p80.h"
-#include "dev-ap91-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-
-#define WHRHPG300N_GPIO_LED_SECURITY 0
-#define WHRHPG300N_GPIO_LED_DIAG 1
-#define WHRHPG300N_GPIO_LED_ROUTER 6
-
-#define WHRHPG300N_GPIO_BTN_ROUTER_ON 7
-#define WHRHPG300N_GPIO_BTN_ROUTER_AUTO 8
-#define WHRHPG300N_GPIO_BTN_RESET 11
-#define WHRHPG300N_GPIO_BTN_AOSS 12
-#define WHRHPG300N_GPIO_LED_LAN1 13
-#define WHRHPG300N_GPIO_LED_LAN2 14
-#define WHRHPG300N_GPIO_LED_LAN3 15
-#define WHRHPG300N_GPIO_LED_LAN4 16
-#define WHRHPG300N_GPIO_LED_WAN 17
-
-#define WHRHPG300N_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WHRHPG300N_KEYS_DEBOUNCE_INTERVAL (3 * WHRHPG300N_KEYS_POLL_INTERVAL)
-
-#define WHRHPG300N_MAC_OFFSET 0x20c
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition whrhpg300n_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x03e000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "u-boot-env",
- .offset = 0x03e000,
- .size = 0x002000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "kernel",
- .offset = 0x040000,
- .size = 0x0e0000,
- }, {
- .name = "rootfs",
- .offset = 0x120000,
- .size = 0x2c0000,
- }, {
- .name = "user_property",
- .offset = 0x3e0000,
- .size = 0x010000,
- }, {
- .name = "ART",
- .offset = 0x3f0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x040000,
- .size = 0x3a0000,
- }
-};
-#endif /* CONFIG_MTD_PARTITIONS */
-
-static struct flash_platform_data whrhpg300n_flash_data = {
-#ifdef CONFIG_MTD_PARTITIONS
- .parts = whrhpg300n_partitions,
- .nr_parts = ARRAY_SIZE(whrhpg300n_partitions),
-#endif
-};
-
-static struct gpio_led whrhpg300n_leds_gpio[] __initdata = {
- {
- .name = "buffalo:orange:security",
- .gpio = WHRHPG300N_GPIO_LED_SECURITY,
- .active_low = 1,
- }, {
- .name = "buffalo:red:diag",
- .gpio = WHRHPG300N_GPIO_LED_DIAG,
- .active_low = 1,
- }, {
- .name = "buffalo:green:router",
- .gpio = WHRHPG300N_GPIO_LED_ROUTER,
- .active_low = 1,
- }, {
- .name = "buffalo:green:wan",
- .gpio = WHRHPG300N_GPIO_LED_WAN,
- .active_low = 1,
- }, {
- .name = "buffalo:green:lan1",
- .gpio = WHRHPG300N_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "buffalo:green:lan2",
- .gpio = WHRHPG300N_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "buffalo:green:lan3",
- .gpio = WHRHPG300N_GPIO_LED_LAN3,
- .active_low = 1,
- }, {
- .name = "buffalo:green:lan4",
- .gpio = WHRHPG300N_GPIO_LED_LAN4,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button whrhpg300n_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WHRHPG300N_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "aoss/wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .gpio = WHRHPG300N_GPIO_BTN_AOSS,
- .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
- .active_low = 1,
- }, {
- .desc = "router_on",
- .type = EV_KEY,
- .code = BTN_2,
- .gpio = WHRHPG300N_GPIO_BTN_ROUTER_ON,
- .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
- .active_low = 1,
- }, {
- .desc = "router_auto",
- .type = EV_KEY,
- .code = BTN_3,
- .gpio = WHRHPG300N_GPIO_BTN_ROUTER_AUTO,
- .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
- .active_low = 1,
- }
-};
-
-static void __init whrhpg300n_setup(void)
-{
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 *mac = (u8 *) KSEG1ADDR(ee + WHRHPG300N_MAC_OFFSET);
-
- ar71xx_add_device_m25p80(&whrhpg300n_flash_data);
-
- ar71xx_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(whrhpg300n_leds_gpio),
- whrhpg300n_leds_gpio);
-
- ar71xx_register_gpio_keys_polled(-1, WHRHPG300N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(whrhpg300n_gpio_keys),
- whrhpg300n_gpio_keys);
-
- ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
- ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
-
- ar71xx_add_device_mdio(0, 0x0);
-
- /* LAN ports */
- ar71xx_add_device_eth(1);
- /* WAN port */
- ar71xx_add_device_eth(0);
-
- ap91_pci_setup_wmac_led_pin(1);
-
- ap91_pci_init(ee, mac);
-}
-
-MIPS_MACHINE(AR71XX_MACH_WHR_HP_G300N, "WHR-HP-G300N", "Buffalo WHR-HP-G300N",
- whrhpg300n_setup);
-
-MIPS_MACHINE(AR71XX_MACH_WHR_G301N, "WHR-G301N", "Buffalo WHR-G301N",
- whrhpg300n_setup);
-
-MIPS_MACHINE(AR71XX_MACH_WHR_HP_GN, "WHR-HP-GN", "Buffalo WHR-HP-GN",
- whrhpg300n_setup);
projects / openwrt / svn-archive / archive.git / blobdiff