+++ /dev/null
-/*
- * Buffalo WZR-HP-AG300H board support
- *
- * Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mips_machine.h>
-#include <asm/mach-ar71xx/ar71xx.h>
-#include <asm/mach-ar71xx/gpio.h>
-
-#include "machtype.h"
-#include "devices.h"
-#include "dev-ap94-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-
-#define WZRHPAG300H_MAC_OFFSET 0x20c
-#define WZRHPAG300H_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPAG300H_KEYS_POLL_INTERVAL)
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition wzrhpag300h_flash_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x0040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "u-boot-env",
- .offset = 0x0040000,
- .size = 0x0010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "art",
- .offset = 0x0050000,
- .size = 0x0010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "kernel",
- .offset = 0x0060000,
- .size = 0x0100000,
- }, {
- .name = "rootfs",
- .offset = 0x0160000,
- .size = 0x1e90000,
- }, {
- .name = "user_property",
- .offset = 0x1ff0000,
- .size = 0x0010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x0060000,
- .size = 0x1f90000,
- }
-};
-
-#endif /* CONFIG_MTD_PARTITIONS */
-
-static struct flash_platform_data wzrhpag300h_flash_data = {
-#ifdef CONFIG_MTD_PARTITIONS
- .parts = wzrhpag300h_flash_partitions,
- .nr_parts = ARRAY_SIZE(wzrhpag300h_flash_partitions),
-#endif
-};
-
-static struct gpio_led wzrhpag300h_leds_gpio[] __initdata = {
- {
- .name = "buffalo:red:diag",
- .gpio = 1,
- .active_low = 1,
- },
-};
-
-
-static struct gpio_keys_button wzrhpag300h_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 11,
- .active_low = 1,
- }, {
- .desc = "usb",
- .type = EV_KEY,
- .code = BTN_2,
- .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 3,
- .active_low = 1,
- }, {
- .desc = "aoss",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 5,
- .active_low = 1,
- }, {
- .desc = "router_auto",
- .type = EV_KEY,
- .code = BTN_6,
- .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 6,
- .active_low = 1,
- }, {
- .desc = "router_off",
- .type = EV_KEY,
- .code = BTN_5,
- .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 7,
- .active_low = 1,
- }
-};
-
-static void __init wzrhpag300h_setup(void)
-{
- u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1f051000);
- u8 *eeprom2 = (u8 *) KSEG1ADDR(0x1f055000);
- u8 *mac1 = eeprom1 + WZRHPAG300H_MAC_OFFSET;
- u8 *mac2 = eeprom2 + WZRHPAG300H_MAC_OFFSET;
-
- ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 0);
- ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac2, 1);
-
- ar71xx_add_device_mdio(0, ~(BIT(0) | BIT(4)));
-
- ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ar71xx_eth0_data.speed = SPEED_1000;
- ar71xx_eth0_data.duplex = DUPLEX_FULL;
- ar71xx_eth0_data.phy_mask = BIT(0);
-
- ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ar71xx_eth1_data.phy_mask = BIT(4);
-
- ar71xx_add_device_eth(0);
- ar71xx_add_device_eth(1);
-
- ar71xx_add_device_usb();
- gpio_request(2, "usb");
- gpio_direction_output(2, 1);
-
- ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpag300h_leds_gpio),
- wzrhpag300h_leds_gpio);
-
- ar71xx_register_gpio_keys_polled(-1, WZRHPAG300H_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wzrhpag300h_gpio_keys),
- wzrhpag300h_gpio_keys);
-
- ar71xx_add_device_m25p80_multi(&wzrhpag300h_flash_data);
-
- ap94_pci_init(eeprom1, mac1, eeprom2, mac2);
-}
-
-MIPS_MACHINE(AR71XX_MACH_WZR_HP_AG300H, "WZR-HP-AG300H",
- "Buffalo WZR-HP-AG300H", wzrhpag300h_setup);
-