ar71xx: move arch specific files to files-2.6.39

[openwrt/openwrt.git] / target / linux / ar71xx / files-2.6.39 / arch / mips / ar71xx / mach-wzr-hp-ag300h.c

diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-ag300h.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-ag300h.c
new file mode 100644 (file)
index 0000000..d4ba62c
--- /dev/null
+++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-ag300h.c
@@ -0,0 +1,166 @@
+/*
+ *  Buffalo WZR-HP-AG300H board support
+ *
+ *  Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mips_machine.h>
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/gpio.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-ap94-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+
+#define WZRHPAG300H_MAC_OFFSET         0x20c
+#define WZRHPAG300H_KEYS_POLL_INTERVAL     20      /* msecs */
+#define WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPAG300H_KEYS_POLL_INTERVAL)
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition wzrhpag300h_flash_partitions[] = {
+       {
+               .name           = "u-boot",
+               .offset         = 0,
+               .size           = 0x0040000,
+               .mask_flags     = MTD_WRITEABLE,
+       }, {
+               .name           = "u-boot-env",
+               .offset         = 0x0040000,
+               .size           = 0x0010000,
+               .mask_flags     = MTD_WRITEABLE,
+       }, {
+               .name           = "art",
+               .offset         = 0x0050000,
+               .size           = 0x0010000,
+               .mask_flags     = MTD_WRITEABLE,
+       }, {
+               .name           = "kernel",
+               .offset         = 0x0060000,
+               .size           = 0x0100000,
+       }, {
+               .name           = "rootfs",
+               .offset         = 0x0160000,
+               .size           = 0x1e90000,
+       }, {
+               .name           = "user_property",
+               .offset         = 0x1ff0000,
+               .size           = 0x0010000,
+               .mask_flags     = MTD_WRITEABLE,
+       }, {
+               .name           = "firmware",
+               .offset         = 0x0060000,
+               .size           = 0x1f90000,
+       }
+};
+
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data wzrhpag300h_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+       .parts      = wzrhpag300h_flash_partitions,
+       .nr_parts   = ARRAY_SIZE(wzrhpag300h_flash_partitions),
+#endif
+};
+
+static struct gpio_led wzrhpag300h_leds_gpio[] __initdata = {
+       {
+               .name           = "buffalo:red:diag",
+               .gpio           = 1,
+               .active_low     = 1,
+       },
+};
+
+
+static struct gpio_keys_button wzrhpag300h_gpio_keys[] __initdata = {
+       {
+               .desc           = "reset",
+               .type           = EV_KEY,
+               .code           = KEY_RESTART,
+               .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = 11,
+               .active_low     = 1,
+       }, {
+               .desc           = "usb",
+               .type           = EV_KEY,
+               .code           = BTN_2,
+               .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = 3,
+               .active_low     = 1,
+       }, {
+               .desc           = "aoss",
+               .type           = EV_KEY,
+               .code           = KEY_WPS_BUTTON,
+               .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = 5,
+               .active_low     = 1,
+       }, {
+               .desc           = "router_auto",
+               .type           = EV_KEY,
+               .code           = BTN_6,
+               .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = 6,
+               .active_low     = 1,
+       }, {
+               .desc           = "router_off",
+               .type           = EV_KEY,
+               .code           = BTN_5,
+               .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = 7,
+               .active_low     = 1,
+       }
+};
+
+static void __init wzrhpag300h_setup(void)
+{
+       u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1f051000);
+       u8 *eeprom2 = (u8 *) KSEG1ADDR(0x1f055000);
+       u8 *mac1 = eeprom1 + WZRHPAG300H_MAC_OFFSET;
+       u8 *mac2 = eeprom2 + WZRHPAG300H_MAC_OFFSET;
+
+       ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 0);
+       ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac2, 1);
+
+       ar71xx_add_device_mdio(0, ~(BIT(0) | BIT(4)));
+
+       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+       ar71xx_eth0_data.speed = SPEED_1000;
+       ar71xx_eth0_data.duplex = DUPLEX_FULL;
+       ar71xx_eth0_data.phy_mask = BIT(0);
+
+       ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+       ar71xx_eth1_data.phy_mask = BIT(4);
+
+       ar71xx_add_device_eth(0);
+       ar71xx_add_device_eth(1);
+
+       ar71xx_add_device_usb();
+       gpio_request(2, "usb");
+       gpio_direction_output(2, 1);
+
+       ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpag300h_leds_gpio),
+                                       wzrhpag300h_leds_gpio);
+
+       ar71xx_register_gpio_keys_polled(-1, WZRHPAG300H_KEYS_POLL_INTERVAL,
+                                        ARRAY_SIZE(wzrhpag300h_gpio_keys),
+                                        wzrhpag300h_gpio_keys);
+
+       ar71xx_add_device_m25p80_multi(&wzrhpag300h_flash_data);
+
+       ap94_pci_init(eeprom1, mac1, eeprom2, mac2);
+}
+
+MIPS_MACHINE(AR71XX_MACH_WZR_HP_AG300H, "WZR-HP-AG300H",
+            "Buffalo WZR-HP-AG300H", wzrhpag300h_setup);
+