+++ /dev/null
---- a/arch/mips/ath79/mach-ap136.c
-+++ b/arch/mips/ath79/mach-ap136.c
-@@ -1,5 +1,5 @@
- /*
-- * Qualcomm Atheros AP136 reference board support
-+ * Atheros AP136 reference board support
- *
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
-@@ -18,23 +18,27 @@
- *
- */
-
--#include <linux/pci.h>
--#include <linux/ath9k_platform.h>
-+#include <linux/platform_device.h>
-+#include <linux/ar8216_platform.h>
-
--#include "machtypes.h"
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+#include "common.h"
-+#include "dev-ap9x-pci.h"
- #include "dev-gpio-buttons.h"
-+#include "dev-eth.h"
- #include "dev-leds-gpio.h"
--#include "dev-spi.h"
-+#include "dev-m25p80.h"
- #include "dev-usb.h"
- #include "dev-wmac.h"
--#include "pci.h"
-+#include "machtypes.h"
-
--#define AP136_GPIO_LED_STATUS_RED 14
--#define AP136_GPIO_LED_STATUS_GREEN 19
- #define AP136_GPIO_LED_USB 4
--#define AP136_GPIO_LED_WLAN_2G 13
- #define AP136_GPIO_LED_WLAN_5G 12
-+#define AP136_GPIO_LED_WLAN_2G 13
-+#define AP136_GPIO_LED_STATUS_RED 14
- #define AP136_GPIO_LED_WPS_RED 15
-+#define AP136_GPIO_LED_STATUS_GREEN 19
- #define AP136_GPIO_LED_WPS_GREEN 20
-
- #define AP136_GPIO_BTN_WPS 16
-@@ -43,8 +47,10 @@
- #define AP136_KEYS_POLL_INTERVAL 20 /* msecs */
- #define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL)
-
--#define AP136_WMAC_CALDATA_OFFSET 0x1000
--#define AP136_PCIE_CALDATA_OFFSET 0x5000
-+#define AP136_MAC0_OFFSET 0
-+#define AP136_MAC1_OFFSET 6
-+#define AP136_WMAC_CALDATA_OFFSET 0x1000
-+#define AP136_PCIE_CALDATA_OFFSET 0x5000
-
- static struct gpio_led ap136_leds_gpio[] __initdata = {
- {
-@@ -98,63 +104,91 @@ static struct gpio_keys_button ap136_gpi
- },
- };
-
--static struct ath79_spi_controller_data ap136_spi0_data = {
-- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-- .cs_line = 0,
-+static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg = {
-+ .mode = AR8327_PAD_MAC_RGMII,
-+ .txclk_delay_en = true,
-+ .rxclk_delay_en = true,
-+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
-+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
- };
-
--static struct spi_board_info ap136_spi_info[] = {
-- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "mx25l6405d",
-- .controller_data = &ap136_spi0_data,
-- }
-+static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg = {
-+ .mode = AR8327_PAD_MAC_SGMII,
-+ .txclk_delay_en = false,
-+ .rxclk_delay_en = true,
-+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL0,
-+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
- };
-
--static struct ath79_spi_platform_data ap136_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
-+static struct ar8327_platform_data ap136_ar8327_data = {
-+ .pad0_cfg = &ap136_ar8327_pad0_cfg,
-+ .pad6_cfg = &ap136_ar8327_pad6_cfg,
-+ .cpuport_cfg = {
-+ .force_link = 1,
-+ .speed = AR8327_PORT_SPEED_1000,
-+ .duplex = 1,
-+ .txpause = 1,
-+ .rxpause = 1,
-+ }
- };
-
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data ap136_ath9k_data;
-+static struct mdio_board_info ap136_mdio0_info[] = {
-+ {
-+ .bus_id = "ag71xx-mdio.0",
-+ .phy_addr = 0,
-+ .platform_data = &ap136_ar8327_data,
-+ },
-+};
-
--static int ap136_pci_plat_dev_init(struct pci_dev *dev)
-+static void __init ap136_gmac_setup(void)
- {
-- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
-- dev->dev.platform_data = &ap136_ath9k_data;
-+ void __iomem *base;
-+ u32 t;
-
-- return 0;
--}
-+ base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
-
--static void __init ap136_pci_init(u8 *eeprom)
--{
-- memcpy(ap136_ath9k_data.eeprom_data, eeprom,
-- sizeof(ap136_ath9k_data.eeprom_data));
-+ t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG);
-+
-+ t &= ~(QCA955X_ETH_CFG_RGMII_GMAC0 | QCA955X_ETH_CFG_SGMII_GMAC0);
-+ t |= QCA955X_ETH_CFG_RGMII_GMAC0;
-
-- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
-- ath79_register_pci();
-+ __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
-+
-+ iounmap(base);
- }
--#else
--static inline void ap136_pci_init(void) {}
--#endif /* CONFIG_PCI */
-
- static void __init ap136_setup(void)
- {
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
-+ ath79_register_m25p80(NULL);
-+
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
- ap136_leds_gpio);
- ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap136_gpio_keys),
- ap136_gpio_keys);
-- ath79_register_spi(&ap136_spi_data, ap136_spi_info,
-- ARRAY_SIZE(ap136_spi_info));
-+
- ath79_register_usb();
-- ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
-- ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
-+ ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL);
-+ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
-+
-+ ap136_gmac_setup();
-+
-+ ath79_register_mdio(0, 0x0);
-+
-+ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0);
-+
-+ mdiobus_register_board_info(ap136_mdio0_info,
-+ ARRAY_SIZE(ap136_mdio0_info));
-+
-+ /* GMAC0 is connected to an AR8327 switch */
-+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+ ath79_eth0_data.phy_mask = BIT(0);
-+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-+ ath79_eth0_pll_data.pll_1000 = 0xa6000000;
-+
-+ ath79_register_eth(0);
- }
-
- MIPS_MACHINE(ATH79_MACH_AP136, "AP136", "Atheros AP136 reference board",
projects / openwrt / svn-archive / archive.git / blobdiff