at91: move 3.10 specific files and patches

[openwrt/staging/mkresin.git] / target / linux / at91 / files / arch / arm / boot / dts / lmu5000.dts

diff --git a/target/linux/at91/files/arch/arm/boot/dts/lmu5000.dts b/target/linux/at91/files/arch/arm/boot/dts/lmu5000.dts
deleted file mode 100644 (file)
index 671f452..0000000
--- a/target/linux/at91/files/arch/arm/boot/dts/lmu5000.dts
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * lmu5000.dst - Device Tree file for CalAmp LMU5000 board
- *
- * Copyright (C) 2013 Adam Porter <porter.adam@gmail.com>
- *
- * Licensed under GPLv2.
- */
-/dts-v1/;
-/include/ "at91sam9g20.dtsi"
-
-/ {
-       model = "CalAmp LMU5000";
-       compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9";
-
-       chosen {
-               bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2";
-       };
-
-       memory {
-               reg = <0x20000000 0x4000000>;
-       };
-
-       clocks {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-
-               main_clock: clock@0 {
-                       compatible = "atmel,osc", "fixed-clock";
-                       clock-frequency = <18432000>;
-               };
-       };
-
-       ahb {
-               apb {
-                       pinctrl@fffff400 {
-                               board {
-                                       pinctrl_pck0_as_mck: pck0_as_mck {
-                                               atmel,pins =
-                                                       <2 1 0x2 0x0>;  /* PC1 periph B */
-                                       };
-
-                               };
-                       };
-
-                       dbgu: serial@fffff200 {
-                               status = "okay";
-                       };
-
-                       usart0: serial@fffb0000 {
-                               pinctrl-0 =
-                                       <&pinctrl_usart0
-                                        &pinctrl_usart0_rts
-                                        &pinctrl_usart0_cts
-                                        &pinctrl_usart0_dtr_dsr
-                                        &pinctrl_usart0_dcd
-                                        &pinctrl_usart0_ri>;
-                               status = "okay";
-                       };
-
-                       usart2: serial@fffb8000 {
-                               status = "okay";
-                       };
-
-                       uart0: serial@fffd4000 {
-                               status = "okay";
-                       };
-
-                       uart1: serial@fffd8000 {
-                               status = "okay";
-                       };
-
-                       macb0: ethernet@fffc4000 {
-                               phy-mode = "mii";
-                               status = "okay";
-                       };
-
-                       usb1: gadget@fffa4000 {
-                               atmel,vbus-gpio = <&pioC 5 0>;
-                               status = "okay";
-                       };
-
-                       ssc0: ssc@fffbc000 {
-                               status = "okay";
-                               pinctrl-0 = <&pinctrl_ssc0_tx>;
-                       };
-
-                       watchdog@fffffd40 {
-                               status = "okay";
-                       };
-               };
-
-               nand0: nand@40000000 {
-                       nand-bus-width = <8>;
-                       nand-ecc-mode = "soft";
-                       nand-on-flash-bbt;
-                       status = "okay";
-
-                       kernel@0 {
-                               label = "kernel";
-                               reg = <0x0 0x400000>;
-                       };
-
-                       rootfs@400000 {
-                               label = "rootfs";
-                               reg = <0x400000 0x3C00000>;
-                       };
-
-                       user1@4000000 {
-                               label = "user1";
-                               reg = <0x4000000 0x2000000>;
-                       };
-
-                       user2@6000000 {
-                               label = "user2";
-                               reg = <0x6000000 0x2000000>;
-                       };
-               };
-
-               usb0: ohci@00500000 {
-                       num-ports = <2>;
-                       status = "okay";
-               };
-       };
-};