at91: add kernel support for sama7g5 soc

[openwrt/openwrt.git] / target / linux / at91 / patches-5.10 / 154-pinctrl-at91-pio4-Fix-slew-rate-disablement.patch

diff --git a/target/linux/at91/patches-5.10/154-pinctrl-at91-pio4-Fix-slew-rate-disablement.patch b/target/linux/at91/patches-5.10/154-pinctrl-at91-pio4-Fix-slew-rate-disablement.patch
new file mode 100644 (file)
index 0000000..6235f91
--- /dev/null
+++ b/target/linux/at91/patches-5.10/154-pinctrl-at91-pio4-Fix-slew-rate-disablement.patch
@@ -0,0 +1,54 @@
+From dc07cbae6e96843d26e8f10b16e901620bd16462 Mon Sep 17 00:00:00 2001
+From: Tudor Ambarus <tudor.ambarus@microchip.com>
+Date: Fri, 9 Apr 2021 11:25:22 +0300
+Subject: [PATCH 154/247] pinctrl: at91-pio4: Fix slew rate disablement
+
+The slew rate was enabled by default for each configuration of the
+pin. In case the pin had more than one configuration, even if
+we set the slew rate as disabled in the device tree, the next pin
+configuration would set again the slew rate enabled by default,
+overwriting the slew rate disablement.
+Instead of enabling the slew rate by default for each pin configuration,
+enable the slew rate by default just once per pin, regardless of the
+number of configurations. This way the slew rate disablement will also
+work for cases where pins have multiple configurations.
+
+Fixes: c709135e576b ("pinctrl: at91-pio4: add support for slew-rate")
+Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
+Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
+Link: https://lore.kernel.org/r/20210409082522.625168-1-tudor.ambarus@microchip.com
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+---
+ drivers/pinctrl/pinctrl-at91-pio4.c | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
+index a5d328808e4c..4c01d8471ffa 100644
+--- a/drivers/pinctrl/pinctrl-at91-pio4.c
++++ b/drivers/pinctrl/pinctrl-at91-pio4.c
+@@ -801,6 +801,10 @@ static int atmel_conf_pin_config_group_set(struct pinctrl_dev *pctldev,
+ 
+       conf = atmel_pin_config_read(pctldev, pin_id);
+ 
++      /* Keep slew rate enabled by default. */
++      if (atmel_pioctrl->slew_rate_support)
++              conf |= ATMEL_PIO_SR_MASK;
++
+       for (i = 0; i < num_configs; i++) {
+               unsigned int param = pinconf_to_config_param(configs[i]);
+               unsigned int arg = pinconf_to_config_argument(configs[i]);
+@@ -808,10 +812,6 @@ static int atmel_conf_pin_config_group_set(struct pinctrl_dev *pctldev,
+               dev_dbg(pctldev->dev, "%s: pin=%u, config=0x%lx\n",
+                       __func__, pin_id, configs[i]);
+ 
+-              /* Keep slew rate enabled by default. */
+-              if (atmel_pioctrl->slew_rate_support)
+-                      conf |= ATMEL_PIO_SR_MASK;
+-
+               switch (param) {
+               case PIN_CONFIG_BIAS_DISABLE:
+                       conf &= (~ATMEL_PIO_PUEN_MASK);
+-- 
+2.32.0
+