Rename 'atheros' target to 'ath25'
[openwrt/openwrt.git] / target / linux / ath25 / patches-3.18 / 220-enet_micrel_workaround.patch
diff --git a/target/linux/ath25/patches-3.18/220-enet_micrel_workaround.patch b/target/linux/ath25/patches-3.18/220-enet_micrel_workaround.patch
new file mode 100644 (file)
index 0000000..398495a
--- /dev/null
@@ -0,0 +1,91 @@
+--- a/drivers/net/ethernet/atheros/ar231x/ar231x.c
++++ b/drivers/net/ethernet/atheros/ar231x/ar231x.c
+@@ -135,6 +135,7 @@ static int ar231x_mdiobus_write(struct m
+ static int ar231x_mdiobus_reset(struct mii_bus *bus);
+ static int ar231x_mdiobus_probe(struct net_device *dev);
+ static void ar231x_adjust_link(struct net_device *dev);
++static bool no_phy;
+ #ifndef ERR
+ #define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
+@@ -167,6 +168,32 @@ static const struct net_device_ops ar231
+ #endif
+ };
++static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id)
++{
++      int phy_reg;
++
++      /**
++       * Grab the bits from PHYIR1, and put them
++       * in the upper half.
++       */
++      phy_reg = mdiobus_read(bus, addr, MII_PHYSID1);
++
++      if (phy_reg < 0)
++              return -EIO;
++
++      *phy_id = (phy_reg & 0xffff) << 16;
++
++      /* Grab the bits from PHYIR2, and put them in the lower half */
++      phy_reg = mdiobus_read(bus, addr, MII_PHYSID2);
++
++      if (phy_reg < 0)
++              return -EIO;
++
++      *phy_id |= (phy_reg & 0xffff);
++
++      return 0;
++}
++
+ static int ar231x_probe(struct platform_device *pdev)
+ {
+       struct net_device *dev;
+@@ -273,6 +300,24 @@ static int ar231x_probe(struct platform_
+       mdiobus_register(sp->mii_bus);
++      /**
++       * Workaround for Micrel switch, which is only available on
++       * one PHY and cannot be configured through MDIO.
++       */
++      if (!no_phy) {
++              u32 phy_id = 0;
++
++              get_phy_id(sp->mii_bus, 1, &phy_id);
++              if (phy_id == 0x00221450)
++                      no_phy = true;
++      }
++      if (no_phy) {
++              sp->link = 1;
++              netif_carrier_on(dev);
++              return 0;
++      }
++      no_phy = true;
++
+       if (ar231x_mdiobus_probe(dev) != 0) {
+               printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
+               rx_tasklet_cleanup(dev);
+@@ -329,8 +374,10 @@ static int ar231x_remove(struct platform
+       rx_tasklet_cleanup(dev);
+       ar231x_init_cleanup(dev);
+       unregister_netdev(dev);
+-      mdiobus_unregister(sp->mii_bus);
+-      mdiobus_free(sp->mii_bus);
++      if (sp->mii_bus) {
++              mdiobus_unregister(sp->mii_bus);
++              mdiobus_free(sp->mii_bus);
++      }
+       kfree(dev);
+       return 0;
+ }
+@@ -1079,6 +1126,9 @@ static int ar231x_ioctl(struct net_devic
+ {
+       struct ar231x_private *sp = netdev_priv(dev);
++      if (!sp->phy_dev)
++              return -ENODEV;
++
+       switch (cmd) {
+       case SIOCGMIIPHY:
+       case SIOCGMIIREG: