ath79: drop, its not ready for a release yet

[openwrt/staging/blogic.git] / target / linux / ath79 / dts / ar7100.dtsi

diff --git a/target/linux/ath79/dts/ar7100.dtsi b/target/linux/ath79/dts/ar7100.dtsi
deleted file mode 100644 (file)
index 9957b8d..0000000
--- a/target/linux/ath79/dts/ar7100.dtsi
+++ /dev/null
@@ -1,204 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include <dt-bindings/clock/ath79-clk.h>
-#include "ath79.dtsi"
-
-/ {
-       compatible = "qca,ar7100";
-
-       cpus {
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               cpu@0 {
-                       device_type = "cpu";
-                       compatible = "mips,mips24Kc";
-                       clocks = <&pll ATH79_CLK_CPU>;
-                       reg = <0>;
-               };
-       };
-
-       ahb {
-               apb {
-                       ddr_ctrl: memory-controller@18000000 {
-                               compatible = "qca,ar7100-ddr-controller";
-                               reg = <0x18000000 0x100>;
-
-                               #qca,ddr-wb-channel-cells = <1>;
-                       };
-
-                       uart: uart@18020000 {
-                               compatible = "ns16550a";
-                               reg = <0x18020000 0x20>;
-                               interrupts = <3>;
-
-                               clocks = <&pll ATH79_CLK_AHB>;
-                               clock-names = "uart";
-
-                               reg-io-width = <4>;
-                               reg-shift = <2>;
-                               no-loopback-test;
-
-                               status = "disabled";
-                       };
-
-                       usb_phy: usb-phy@18030000 {
-                               compatible = "qca,ar7100-usb-phy";
-                               reg = <0x18030000 0x10>;
-
-                               reset-names = "usb-phy", "usb-host", "usb-ohci-dll";
-                               resets = <&rst 4>, <&rst 5>, <&rst 6>;
-
-                               #phy-cells = <0>;
-
-                               status = "disabled";
-                       };
-
-                       gpio: gpio@18040000 {
-                               compatible = "qca,ar7100-gpio";
-                               reg = <0x18040000 0x30>;
-                               interrupts = <2>;
-
-                               ngpios = <16>;
-
-                               gpio-controller;
-                               #gpio-cells = <2>;
-
-                               interrupt-controller;
-                               #interrupt-cells = <2>;
-                       };
-
-                       pll: pll-controller@18050000 {
-                               compatible = "qca,ar7100-pll", "syscon";
-                               reg = <0x18050000 0x20>;
-
-                               clock-names = "ref";
-                               /* The board must provides the ref clock */
-
-                               #clock-cells = <1>;
-                               clock-output-names = "cpu", "ddr", "ahb";
-                       };
-
-                       wdt: wdt@18060008 {
-                               compatible = "qca,ar7130-wdt";
-                               reg = <0x18060008 0x8>;
-
-                               interrupts = <4>;
-
-                               clocks = <&pll ATH79_CLK_AHB>;
-                               clock-names = "wdt";
-                       };
-
-
-                       rst: reset-controller@18060024 {
-                               compatible = "qca,ar7100-reset";
-                               reg = <0x18060024 0x4>;
-
-                               #reset-cells = <1>;
-                       };
-
-                       pcie0: pcie-controller@180c0000 {
-                               compatible = "qca,ar7100-pci";
-                               #address-cells = <3>;
-                               #size-cells = <2>;
-                               bus-range = <0x0 0x0>;
-                               reg = <0x17010000 0x100>;
-                               reg-names = "cfg_base";
-                               ranges = <0x2000000 0 0x10000000 0x10000000 0 0x07000000        /* pci memory */
-                                         0x1000000 0 0x00000000 0x0000000 0 0x000001>;         /* io space */
-                               interrupt-parent = <&cpuintc>;
-                               interrupts = <2>;
-
-                               interrupt-controller;
-                               #interrupt-cells = <1>;
-
-                               interrupt-map-mask = <0 0 0 1>;
-                               interrupt-map = <0 0 0 0 &pcie0 0>;
-                               status = "disabled";
-                       };
-               };
-       };
-
-       usb2: usb@1b000000 {
-               compatible = "generic-ehci";
-               reg = <0x1b000000 0x1000>;
-
-               interrupt-parent = <&cpuintc>;
-               interrupts = <3>;
-
-               phy-names = "usb-phy";
-               phys = <&usb_phy>;
-
-               has-synopsys-hc-bug;
-
-               status = "disabled";
-       };
-
-       usb1: usb@1c000000 {
-               compatible = "generic-ohci";
-               reg = <0x1c000000 0x1000>;
-
-               interrupt-parent = <&miscintc>;
-               interrupts = <6>;
-
-               phy-names = "usb-phy";
-               phys = <&usb_phy>;
-
-               status = "disabled";
-       };
-
-       spi: spi@1f000000 {
-               compatible = "qca,ar7100-spi";
-               reg = <0x1f000000 0x10>;
-
-               clocks = <&pll ATH79_CLK_AHB>;
-               clock-names = "ahb";
-
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               status = "disabled";
-       };
-};
-
-&cpuintc {
-       qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
-       qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
-                               <&ddr_ctrl 0>, <&ddr_ctrl 1>;
-};
-
-&miscintc {
-       compatible = "qca,ar7100-misc-intc";
-};
-
-&eth0 {
-       compatible = "qca,ar7100-eth";
-       reg = <0x19000000 0x200
-               0x18070000 0x4>;
-
-       pll-data = <0x00110000 0x00001099 0x00991099>;
-       pll-reg = <0x4 0x10 17>;
-       pll-handle = <&pll>;
-       phy-mode = "rgmii";
-
-       resets = <&rst 8>, <&rst 9>;
-       reset-names = "phy", "mac";
-};
-
-&mdio1 {
-       builtin-switch;
-};
-
-&eth1 {
-       compatible = "qca,ar7100-eth";
-       reg = <0x1a000000 0x200
-               0x18070004 0x4>;
-
-       pll-data = <0x00110000 0x00001099 0x00991099>;
-       pll-reg = <0x4 0x14 19>;
-       pll-handle = <&pll>;
-
-       phy-mode = "rgmii";
-
-       resets = <&rst 12>, <&rst 13>;
-       reset-names = "phy", "mac";
-};