ath79: support Fortinet FAP-220-B

[openwrt/openwrt.git] / target / linux / ath79 / dts / ar7161_fortinet_fap-220-b.dts

diff --git a/target/linux/ath79/dts/ar7161_fortinet_fap-220-b.dts b/target/linux/ath79/dts/ar7161_fortinet_fap-220-b.dts
new file mode 100644 (file)
index 0000000..331bc31
--- /dev/null
+++ b/target/linux/ath79/dts/ar7161_fortinet_fap-220-b.dts
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar7100.dtsi"
+#include "arxxxx_fortinet_loader.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "fortinet,fap-220-b", "qca,ar7161";
+       model = "Fortinet FAP-220-B";
+
+       chosen {
+               bootargs = "console=ttyS0,9600";
+       };
+
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
+               label-mac-device = &eth1;
+       };
+
+       keys {
+               compatible = "gpio-keys";
+               reset {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_power: power-green {
+                       label = "green:power";
+                       gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+                       default-state = "on";
+               };
+
+               status-green {
+                       label = "green:status";
+                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+               };
+
+               status-yellow {
+                       label = "yellow:status";
+                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+                       panic-indicator;
+               };
+
+               mode-green {
+                       label = "green:mode";
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+               };
+
+               mode-yellow {
+                       label = "yellow:mode";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+               };
+
+               wlan2g-green {
+                       label = "green:wlan2g";
+                       gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               wlan2g-yellow {
+                       label = "yellow:wlan2g";
+                       gpios = <&ath9k0 3 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0assoc";
+               };
+
+               wlan5g-green {
+                       label = "green:wlan5g";
+                       gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy1tpt";
+               };
+
+               wlan5g-yellow {
+                       label = "yellow:wlan5g";
+                       gpios = <&ath9k1 3 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy1assoc";
+               };
+       };
+
+       virtual_flash {
+               devices = <&fwconcat0 &fwconcat1 &fwconcat2>;
+       };
+};
+
+&pcie0 {
+       status = "okay";
+
+       ath9k0: wifi@0,11 { /* 2.4 GHz */
+               compatible = "pci168c,0029";
+               reg = <0x8800 0 0 0 0>;
+               ieee80211-freq-limit = <2402000 2482000>;
+               nvmem-cells = <&macaddr_art_120c>, <&cal_art_1000>;
+               nvmem-cell-names = "mac-address", "calibration";
+               mac-address-increment = <1>;
+               #gpio-cells = <2>;
+               gpio-controller;
+       };
+
+       ath9k1: wifi@0,12 { /* 5 GHz */
+               compatible = "pci168c,0029";
+               reg = <0x9000 0 0 0 0>;
+               ieee80211-freq-limit = <2402000 2482000 4900000 5990000>;
+               nvmem-cells = <&macaddr_art_520c>, <&cal_art_5000>;
+               nvmem-cell-names = "mac-address", "calibration";
+               mac-address-increment = <9>;
+               #gpio-cells = <2>;
+               gpio-controller;
+       };
+};
+
+&mdio0 {
+       status = "okay";
+
+       phy0: ethernet-phy@0 {
+               reg = <0x0>;
+       };
+};
+
+&eth0 {
+       status = "okay";
+       compatible = "syscon", "simple-mfd";
+};
+
+&eth1 {
+       status = "okay";
+       nvmem-cells = <&macaddr_art_120c>;
+       nvmem-cell-names = "mac-address";
+
+       pll-data = <0x00110000 0x00001099 0x00991099>;
+       phy-handle = <&phy0>;
+       phy-mode = "rgmii";
+};
+
+&usb1 {
+       status = "okay";
+};
+
+&usb_phy {
+       status = "okay";
+};
+
+&uboot {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       /* Currently doesn't work, because this one lacks colons as delimiters */
+       macaddr_uboot_3ff80: mac-address-ascii@3ff80 {
+               reg = <0x3ff80 0xc>;
+       };
+};
+
+&art {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       cal_art_1000: calibration@1000 {
+               reg = <0x1000 0xeb8>;
+       };
+
+       macaddr_art_120c: mac-address@120c {
+               reg = <0x120c 0x6>;
+       };
+
+       cal_art_5000: calibration@5000 {
+               reg = <0x5000 0xeb8>;
+       };
+
+       macaddr_art_520c: mac-address@520c {
+               reg = <0x520c 0x6>;
+       };
+};