+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar7100.dtsi"
-
-/ {
- aliases {
- led-boot = &led_power_orange;
- led-failsafe = &led_power_orange;
- led-running = &led_power_green;
- led-upgrade = &led_power_orange;
- label-mac-device = ð0;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- extosc: ref {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-output-names = "ref";
- clock-frequency = <40000000>;
- };
-
- reset-leds {
- compatible = "reset-leds";
-
- usb_led {
- label = "netgear:green:usb";
- resets = <&rst 12>;
- trigger-sources = <&usb_ohci_port>, <&usb_ehci_port>;
- linux,default-trigger = "usbport";
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- wps {
- label = "netgear:orange:wps";
- gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
- };
-
- led_power_green: power_green {
- label = "netgear:green:power";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- };
-
- led_power_orange: power_orange {
- label = "netgear:orange:power";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- wps_green {
- label = "netgear:green:wps";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- };
-
- wan_green {
- label = "netgear:green:wan";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- };
- };
-
- ath9k-leds {
- compatible = "gpio-leds";
-
- wlan2g {
- label = "netgear:green:wlan2g";
- gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
- wlan5g {
- label = "netgear:blue:wlan5g";
- gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy1tpt";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- };
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- };
-
- rfkill {
- label = "rfkill";
- linux,code = <KEY_RFKILL>;
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- };
- };
-
- rtl8366s {
- compatible = "realtek,rtl8366s";
-
- gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
- gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
-
- mdio-bus {
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- phy-mask = <0x10>;
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
- };
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb1 {
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- usb_ohci_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&usb2 {
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- usb_ehci_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&pcie0 {
- status = "okay";
-
- ath9k0: wifi@0,11 {
- compatible = "pci168c,0029";
- reg = <0x8800 0 0 0 0>;
- mtd-mac-address = <&art 0x0>;
- qca,no-eeprom;
- #gpio-cells = <2>;
- gpio-controller;
-
- /* all WNDR3700 variants have four antennae dedicated
- * to the 2.4GHz radio. Two antennae are available for
- * each chain. The following configuration is the
- * default setting which taken from the vendor's wifi
- * code for that radio.
- *
- * All possible options [GPIO6,GPIO7,GPIO8,GPIO9]:
- * [0,1,0,1], [0,1,1,0], [1,0,0,1], [1,0,1,0]
- */
- antenna-demux {
- gpio-hog;
- line-name = "fixed antenna group 1";
- gpios = <6 GPIO_ACTIVE_LOW>,
- <7 GPIO_ACTIVE_HIGH>,
- <8 GPIO_ACTIVE_LOW>,
- <9 GPIO_ACTIVE_HIGH>;
- output-high;
- };
- };
-
- ath9k1: wifi@0,12 {
- compatible = "pci168c,0029";
- reg = <0x9000 0 0 0 0>;
- mtd-mac-address = <&art 0xc>;
- qca,no-eeprom;
- #gpio-cells = <2>;
- gpio-controller;
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&spi {
- status = "okay";
-
- num-cs = <1>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions: partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
- };
- };
-};
-
-ð0 {
- status = "okay";
-
- pll-data = <0x11110000 0x00001099 0x00991099>;
-
- mtd-mac-address = <&art 0x00>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-ð1 {
- status = "okay";
-
- pll-data = <0x11110000 0x00001099 0x00991099>;
-
- mtd-mac-address = <&art 0x06>;
-
- phy-handle = <&phy4>;
-};