ath79: add Embedded Wireless Balin Platform

[openwrt/openwrt.git] / target / linux / ath79 / dts / ar7240_engenius_enh202-v1.dts

diff --git a/target/linux/ath79/dts/ar7240_engenius_enh202-v1.dts b/target/linux/ath79/dts/ar7240_engenius_enh202-v1.dts
index aeb1e9e42416797073345f5fd9d61ae6938287f4..9a233c836b7c25908e2e2f559f9898353f3ee412 100644 (file)
--- a/target/linux/ath79/dts/ar7240_engenius_enh202-v1.dts
+++ b/target/linux/ath79/dts/ar7240_engenius_enh202-v1.dts
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
 #include "ar7240.dtsi"
+#include "ar724x_senao_loader-64k.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -68,104 +69,18 @@
                        linux,default-trigger = "phy0tpt";
                };
        };
-
-       virtual_flash {
-               compatible = "mtd-concat";
-
-               devices = <&firmware1 &firmware2>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               compatible = "openwrt,okli";
-                               label = "firmware";
-                               reg = <0x0 0x0>;
-                       };
-               };
-       };
-};
-
-&uart {
-       status = "okay";
-};
-
-&spi {
-       status = "okay";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <20000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x0 0x40000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               label = "u-boot-env";
-                               reg = <0x40000 0x10000>;
-                       };
-
-                       partition@50000 {
-                               label = "custom";
-                               reg = <0x50000 0x50000>;
-                               read-only;
-                       };
-
-                       partition@a0000 {
-                               label = "loader";
-                               reg = <0xa0000 0x10000>;
-                               read-only;
-                       };
-
-                       firmware2: partition@b0000 {
-                               label = "firmware2";
-                               reg = <0xb0000 0xf0000>;
-                       };
-
-                       partition@1a0000 {
-                               label = "fakeroot";
-                               reg = <0x1a0000 0x10000>;
-                       };
-
-                       firmware1: partition@1b0000 {
-                               label = "firmware1";
-                               reg = <0x1b0000 0x4c0000>;
-                       };
-
-                       partition@670000 {
-                               label = "failsafe";
-                               reg = <0x670000 0x180000>;
-                               read-only;
-                       };
-
-                       art: partition@7f0000 {
-                               label = "art";
-                               reg = <0x7f0000 0x10000>;
-                               read-only;
-                       };
-               };
-       };
 };
 
 &eth0 {
-       mtd-mac-address = <&art 0x0>;
+       nvmem-cells = <&macaddr_art_0>;
+       nvmem-cell-names = "mac-address";
 };
 
 &eth1 {
        status = "okay";
 
-       mtd-mac-address = <&art 0x0>;
+       nvmem-cells = <&macaddr_art_0>;
+       nvmem-cell-names = "mac-address";
 };
 
 &pcie {
@@ -179,3 +94,13 @@
                gpio-controller;
        };
 };
+
+&art {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_art_0: macaddr@0 {
+               reg = <0x0 0x6>;
+       };
+};