ath79: drop, its not ready for a release yet

[openwrt/staging/blogic.git] / target / linux / ath79 / dts / ar7241_ubnt-unifi.dts

diff --git a/target/linux/ath79/dts/ar7241_ubnt-unifi.dts b/target/linux/ath79/dts/ar7241_ubnt-unifi.dts
deleted file mode 100644 (file)
index 1cb45e6..0000000
--- a/target/linux/ath79/dts/ar7241_ubnt-unifi.dts
+++ /dev/null
@@ -1,142 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar7241.dtsi"
-
-/ {
-       compatible = "ubnt,unifi", "qca,ar7241";
-       model = "Ubiquiti UniFi AP";
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x4000000>;
-       };
-
-       extosc: ref {
-               compatible = "fixed-clock";
-               #clock-cells = <0>;
-               clock-frequency = <40000000>;
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               poll-interval = <20>;
-               button@0 {
-                       label = "reset";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-               led@0 {
-                       label = "ubnt:green:dome";
-                       gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-               };
-
-               led@1 {
-                       label = "ubnt:orange:dome";
-                       gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-               };
-       };
-};
-
-&uart {
-       status = "okay";
-};
-
-&pll {
-       clocks = <&extosc>;
-};
-
-&spi {
-       status = "okay";
-       num-cs = <1>;
-
-       flash@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "mx25l6405d";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x040000>;
-                               read-only;
-                       };
-
-                       partition@1 {
-                               label = "u-boot-env";
-                               reg = <0x040000 0x010000>;
-                       };
-
-                       partition@2 {
-                               label = "firmware";
-                               reg = <0x050000 0x750000>;
-                       };
-
-                       partition@3 {
-                               label = "board_config";
-                               reg = <0x7a0000 0x010000>;
-                               read-only;
-                       };
-
-                       partition@4 {
-                               label = "cfg";
-                               reg = <0x7b0000 0x040000>;
-                               read-only;
-                       };
-
-                       art: partition@5 {
-                               label = "art";
-                               reg = <0x7f0000 0x010000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&pcie {
-       status = "okay";
-
-       ath9k@0000 {
-               reg = <0x0000 0 0 0 0>;
-               qca,no-eeprom;
-       };
-};
-
-&mdio0 {
-       status = "okay";
-
-       phy4: ethernet-phy@4 {
-               reg = <4>;
-               phy-mode = "mii";
-       };
-};
-
-&eth0 {
-       status = "okay";
-
-       mtd-mac-address = <&art 0x0>;
-       phy-handle = <&phy4>;
-};
-
-&eth1 {
-       status = "okay";
-
-       compatible = "syscon";
-};