ath79: harmonize model names for Ubiquiti devices

[openwrt/staging/ldir.git] / target / linux / ath79 / dts / ar7241_ubnt_unifi.dts

diff --git a/target/linux/ath79/dts/ar7241_ubnt_unifi.dts b/target/linux/ath79/dts/ar7241_ubnt_unifi.dts
index ed6142ef43b31289c78b1a4611a3bd2bcd5e8966..e7369f0dbf4aeebd3c0ffb2e2fabcdbcb334de20 100644 (file)
--- a/target/linux/ath79/dts/ar7241_ubnt_unifi.dts
+++ b/target/linux/ath79/dts/ar7241_ubnt_unifi.dts
@@ -8,10 +8,14 @@
 
 / {
        compatible = "ubnt,unifi", "qca,ar7241";
-       model = "Ubiquiti UniFi AP";
+       model = "Ubiquiti UniFi";
 
        aliases {
-               led-status = &dome_green;
+               led-boot = &led_dome_green;
+               led-failsafe = &led_dome_green;
+               led-running = &led_dome_green;
+               led-upgrade = &led_dome_green;
+               label-mac-device = &wifi;
        };
 
        extosc: ref {
@@ -21,11 +25,8 @@
        };
 
        keys {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
+               compatible = "gpio-keys";
 
-               poll-interval = <20>;
                reset {
                        linux,code = <KEY_RESTART>;
                        gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
@@ -35,12 +36,13 @@
 
        leds {
                compatible = "gpio-leds";
-               dome_green: dome-green {
+
+               led_dome_green: dome_green {
                        label = "ubnt:green:dome";
                        gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
                };
 
-               dome-orange {
+               dome_orange {
                        label = "ubnt:orange:dome";
                        gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
                };
@@ -57,11 +59,10 @@
 
 &spi {
        status = "okay";
+
        num-cs = <1>;
 
        flash@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <25000000>;
@@ -77,29 +78,30 @@
                                read-only;
                        };
 
-                       partition@1 {
+                       partition@40000 {
                                label = "u-boot-env";
                                reg = <0x040000 0x010000>;
                        };
 
-                       partition@2 {
+                       partition@50000 {
+                               compatible = "denx,uimage";
                                label = "firmware";
                                reg = <0x050000 0x750000>;
                        };
 
-                       partition@3 {
+                       partition@7a0000 {
                                label = "board_config";
                                reg = <0x7a0000 0x010000>;
                                read-only;
                        };
 
-                       partition@4 {
+                       partition@7b0000 {
                                label = "cfg";
                                reg = <0x7b0000 0x040000>;
                                read-only;
                        };
 
-                       art: partition@5 {
+                       art: partition@7f0000 {
                                label = "art";
                                reg = <0x7f0000 0x010000>;
                                read-only;
@@ -111,7 +113,7 @@
 &pcie {
        status = "okay";
 
-       wifi@0 {
+       wifi: wifi@0,0 {
                reg = <0x0000 0 0 0 0>;
                qca,no-eeprom;
        };